Ethyl benzyl ether, oxidation

Peroxides. These are formed by aerial oxidation or by autoxidation of a wide range of organic compounds, including diethyl ether, allyl ethyl ether, allyl phenyl ether, dibenzyl ether, benzyl butyl ether, n-butyl ether, iso-butyl ether, r-butyl ether, dioxane, tetrahydrofuran, olefins, and aromatic and saturated aliphatic hydrocarbons. They accumulate during distillation and can detonate violently on evaporation or distillation when their concentration becomes high. If peroxides are likely to be present materials should be tested for peroxides before distillation (for tests see entry under "Ethers", in Chapter 2). Also, distillation should be discontinued when at least one quarter of the residue is left in the distilling flask. 

Bohme77 employed excess monoperphthalic acid in diethyl ether to oxidize dibenzyl and benzyl ethyl sulphoxides. Reaction time was 24 h at - 15 to + 10 °C, after which he added potassium iodide and water and titrated the iodine set free with thiosulphate. Dickenson78 oxidized dimethyl sulphoxide in malt, wort or beer with Na2S2Os. In... 

An equimolar (10 mmol) mixture of benzoyl chloride and n-butyl oxide adsorbed on 5 g graphite A was sequentially irradiated with 90 W incident power. The conversion reached 80% (Yield of isolated n-butyl benzoate (69) 62%). With ethyl oxide, the yield of ethyl benzoate (68) was lower, but noteworthy considering the volatility of this oxide, and the significant retentive power of graphite towards organic compounds. These preliminary results have not yet been expanded, but it is certain that more reactive ethers, like those substituted with sec- or teri-alkyl, benzylic or allylic groups, are deavable in the same way. 

The oxidation of benzaldoxime with perchloryl fluoride (FClOj) has been reported [29 a) to give a complex mixture in which benzaldoxime benzoate and diphenyl oxadiazole are the main products. Sodium nitrohydroxamate [Na2(02NN0)] has been reported [99b) to oxidize benzyl chloride to a mixture of compounds from which benzyl alcohol, benzaldehyde, benzoic acid, 3,4,5-triphenylisoxazole, benzyl-ethyl-ether, phenylnitromethane and diphenyloxadiazole have been isolated. 

Geraniol Citronellol beta Damascone Rose oxide Geranium Citronellyl acetate Phenyl ethyl alcohol Orthomethoxy benzyl ethyl ether... 

No mention was made of other counterions being studied or substituent effects. If heterolytic cleavage had occurred, then benzyl ethyl ether would have been observed. Although no mention was made of the experimental procedure with regard to oxygen exclusion, oxidized phosphorus products were observed. 

BENZYL ETHYL ETHER (539-30-0) Forms explosive mixture with air (flash point 123°F/50°C). Forms unstable peroxides, unless inhibited. Violent reaction with strong oxidizers. Flow or agitation of substance may generate electrostatic charges due to low conductivity. 

FIGURE 5.10 Synthesis of a polyethyleneglycol-polystyrene graft polymer by etherification of Merrifield resin using potassium tetra(oxyethylene) oxide, followed by extension of the chain by reaction of the potassium salt, which is present as the crown ether.21 In several TentaGel resins, the connecting bond is an ethyl ether that is more acid-stable than the benzyl ether. 

Aromatic Compounds.—A number of 2,3-dihydroxyoestra-l,3,5(10)-trienes have been prepared from the corresponding 2-amino-3-hydroxy-compounds using a novel inverse oxidation procedure followed by reduction with KI. Addition of the substrate to sodium metaperiodate in high dilution ensures no coupling with the intermediate quinonimines. 2-Bromo-oestradiol was readily converted into 2-methoxyoestradiol by treatment with NaOMe-MeOH-DMF-CuI. Novel preparations of the biologically interesting 11/3-methyl- and 11/3-ethyl-oestradiol have been reported in full. The key intermediates were the 11-oxo-oestradiol 3-benzyl ether (82) and its 9/3-epimer (83). The latter was derived from the 9,H-epoxides (81) by treatment with KOH followed by benzylation. The thermodynamically unstable 9a-epimer (82) was prepared from the 9j8-epimer (83) by... 

Phenylacetamide has been obtained by a wide variety of reactions from benzyl cyanide with water at 250-260° 6 from benzyl cyanide with water and cadmium oxide at 240° 6 from benzyl cyanide with sulfuric acid 7 8 by saturation of an acetone solution of benzyl cyanide with potassium hydrosulfide 9 from benzyl cyanide with sodium peroxide 10 by electrolytic reduction of benzyl cyanide in sodium hydroxide 11 from ethyl phenyl-acetate with alcoholic 12 or aqueous 13 ammonia from phenyl-acetic acid with ammonium acetate 14 or urea 15 from diazoacetophenone with ammoniacal silver solution 16 from phenyl-acetic acid imino ether hydrochloride and water 17 from acetophenone with ammonium poly sulfide at 215° 18 from benzoic acid 19 and by heating the ammonium salt of phenyl-acetic acid.20... 

Mixed ethers result when alcohols and phenols are used with thoria at 390°—420° and esterification takes place when alcohol and acid interact at 350°-400°. Esterification10 is more complete in the presence of titanic oxide at 280°—300°. One molecule of acid is used with twelve molecules of alcohol, and in this way methyl, ethyl, propyl, butyl, and benzyl esters have been prepared from acetic, propionic and butyric acids. 

Ac, acetyl AIBN, azobis(isobutanonitrile) All, allyl AR, aryl Bn, benzyl f-BOC, ferf-butoxycarbonyl Bu, Butyl Bz, benzoyl CAN, ceric ammonium nitrate Cbz, benzyloxycarbonyl m-CPBA, m-chloroperoxybenzoic acid DAST, diethylaminosulfur trifluoride DBU, l,8-diazabicyclo[5.4.0]undec-7-ene DCC, /V. /V - d i eye I oh e x y I c ar bo -diimide DCM, dichloromethyl DCMME, dichloromethyl methyl ether DDQ, 2,3-dichloro-5,6-dicyano-l,4-benzoquinone DEAD, diethyl azodicarboxylate l-(+)-DET, L-(+)-diethyl tartrate l-DIPT, L-diisopropyl tartrate d-DIPT, D-diisopropyl tartrate DMAP, 4-dimethylaminopyridine DME, 1,2-dimethoxyethane DMF, /V./V-dimethylformamide DMP, 2,2-dimethoxypropane Et, ethyl Im, imidazole KHMDS, potassium hexamethyldisilazane Me, methyl Me2SO, dimethyl sulfoxide MOM, methoxymethyl MOMC1, methoxymethyl chloride Ms, methylsulfonyl MS, molecular sieves NBS, N-bromosuccinimide NIS, /V-iodosuccinimide NMO, /V-methylmorpho-line N-oxide PCC, pyridinium chlorochromate Ph, phenyl PMB, / -methoxvbenzyl PPTs, pyridiniump-toluenesulfonate i-Pr, isopropyl Py, pyridine rt, room temperature TBAF, tetrabutylammonium fluoride TBS, ferf-butyl dimethylsilyl TBDMSC1, f-butylchlorodimethylsilane Tf, trifhioromethylsulfonyl Tf20, trifluoromethylsulfonic anhydride TFA, trifluoroacetic acid THF, tetrahydrofuran TMS, trimethylsilyl TPAP, tetra-n-propylammonium perruthenate / -TsOH. / -toluenesulfonic acid... 

---