Oxidation benzyl chloride

Substituted alkyl halides undergo, of course, the reactions characteristic of their other functional groups—nitration of benzyl chloride, oxidation of ethylene bromohydrin, addition to allyl bromide —but as halides they react very much like ethyl or isopropyl or /cr/ butyl halides. 

In the following preparation, the oxidation of benzyl chloride instead of toluene is therefore given in order to reduce the time required. It should be borne in mind, however, that the procedure is othenvise independent of the nature of the side chain. 

Alkaline permanganate. Heat under reflux i g. of i,2 naph thoquinone, 50 ml. of saturated aqueous KMn04 solution and 2 g. of anhydrous NajCO for 30 minutes. Then proceed as for oxidation of benzyl chloride (p. 393). 1,2-Naphthoquinone gives phthalic acid, m.p. 195°. Phenanthraquinone gives diphenic acid, HOOC CeH CeH COOH, m.p. 229°. 

I. Oxidation to benzoic acid. Boil a mixture of i ml. of benzyl chloride, 50 ml. of saturated aqueous KMn04 solution and 2 g. of anhydrous Na.jCOj under reflux for 30 minutes. Acidify with cone. HCl and then add 25% Na SOj solution until the brown precipitate of MnOj has dissolved. On cooling, benzoic acid crystallises out. Filter through a small Buchner funnel, wash with water and identify (P 347) When recrystallised from water, benzoic acid has m.p. 121 . 

Oxidation, (a) Oxidise 1 g. of styrene with KMn04 and NajCOj (for details see oxidation of benzyl chloride, p. 391). Benzoic acid, m.p. 121 is obtained. Stilbene similarly gives benzoic acid, but requires longer heating—about 1 hour. 

The benzyl group has been widely used for the protection of hydroxyl functions in carbohydrate and nucleotide chemistry (C.M. McCloskey, 1957 C.B. Reese, 1965 B.E. Griffin, 1966). A common benzylation procedure involves heating with neat benzyl chloride and strong bases. A milder procedure is the reaction in DMF solution at room temperatiue with the aid of silver oxide (E. Reinefeld, 1971). Benzyl ethers are not affected by hydroxides and are stable towards oxidants (e.g. periodate, lead tetraacetate), LiAIH, amd weak acids. They are, however, readily cleaved in neutral solution at room temperature by palladium-catalyzed bydrogenolysis (S. Tejima, 1963) or by sodium in liquid ammonia or alcohols (E.J. Rcist, 1964). 

A interesting and useful reaetion is the intramolecular polycyclization reaction of polyalkenes by tandem or domino insertions of alkenes to give polycyclic compounds[l 38]. In the tandem cyclization. an intermediate in many cases is a neopentylpalladium formed by the insertion of 1,1-disubstituted alkenes, which has no possibility of /3-elimination. The key step in the total synthesis of scopadulcic acid is the Pd-catalyzed construction of the tricyclic system 202 containing the bicyclo[3.2. Ijoctane substructure. The single tricyclic product 202 was obtained in 82% yield from 201 [20,164). The benzyl chloride 203 undergoes oxidative addition and alkene insertion. Formation of the spiro compound 204 by the intramolecular double insertion of alkenes is an exam-ple[165]. 

Quantitative Analysis of All llithium Initiator Solutions. Solutions of alkyUithium compounds frequentiy show turbidity associated with the formation of lithium alkoxides by oxidation reactions or lithium hydroxide by reaction with moisture. Although these species contribute to the total basicity of the solution as determined by simple acid titration, they do not react with allyhc and henzylic chlorides or ethylene dibromide rapidly in ether solvents. This difference is the basis for the double titration method of determining the amount of active carbon-bound lithium reagent in a given sample (55,56). Thus the amount of carbon-bound lithium is calculated from the difference between the total amount of base determined by acid titration and the amount of base remaining after the solution reacts with either benzyl chloride, allyl chloride, or ethylene dibromide. 

FiaaHy, a-olefias find their way iato the surfactant and disiafectant market through conversion, first to alkyl dimethyl amine, then to benzyl chloride quats (BAUMAC) and amine oxides. The former are used broadly as disiafectants, often ia combination with cleaning products. The latter is a direct active ia consumer and iadustrial cleaning products. 

Benzyl Chloride. Benzyl chloride is manufactured by high temperature free-radical chlorination of toluene. The yield of benzyl chloride is maximized by use of excess toluene in the feed. More than half of the benzyl chloride produced is converted by butyl benzyl phthalate by reaction with monosodium butyl phthalate. The remainder is hydrolyzed to benzyl alcohol, which is converted to ahphatic esters for use in soaps, perfume, and davors. Benzyl salicylate is used as a sunscreen in lotions and creams. By-product benzal chloride can be converted to benzaldehyde, which is also produced directiy by oxidation of toluene and as a by-product during formation of benzoic acid. By-product ben zotrichl oride is not hydrolyzed to make benzoic acid but is allowed to react with benzoic acid to yield benzoyl chloride. 

Carbon tetrachloride [56-23-5] (tetrachloromethane), CCl, at ordinary temperature and pressure is a heavy, colorless Hquid with a characteristic nonirritant odor it is nonflammable. Carbon tetrachloride contains 92 wt % chlorine. When in contact with a flame or very hot surface, the vapor decomposes to give toxic products, such as phosgene. It is the most toxic of the chloromethanes and the most unstable upon thermal oxidation. The commercial product frequendy contains added stabilizers. Carbon tetrachloride is miscible with many common organic Hquids and is a powerhil solvent for asphalt, benzyl resin (polymerized benzyl chloride), bitumens, chlorinated mbber, ethylceUulose, fats, gums, rosin, and waxes. 

Benzyl chloride readily forms a Grignard compound by reaction with magnesium in ether with the concomitant formation of substantial coupling product, 1,2-diphenylethane [103-29-7]. Benzyl chloride is oxidized first to benzaldehyde [100-52-7] and then to benzoic acid. Nitric acid oxidizes directly to benzoic acid [65-85-0]. Reaction with ethylene oxide produces the benzyl chlorohydrin ether, CgH CH20CH2CH2Cl (18). Benzylphosphonic acid [10542-07-1] is formed from the reaction of benzyl chloride and triethyl phosphite followed by hydrolysis (19). 

Tribromobenzoic acid has been prepared by the deamination of 2,4,6-tribromo-3-aminobenzoic acid (reagents not specified), by hydrolysis of 2,4,6-tribromobenzonitrile, " and by oxidation of the tribromotoluene, the benzyl chloride, the aldehyde,and the glyoxylic acid.i The present method is a modification of that of Bunnett, Robison, and Pennington.i ... 

Note Maximum ambient levels for ethylene oxide are 0.3 ppb at the plant fence. Maximum total emissions of the VOCs acetaldehyde, acrylic acid, benzyl chloride, carbon tetrachloride, chlorofluorocarbons, ethyl acrylate, halons, maleic anhydride, 1,1,1-trichlorethane, trichloroethylene, and trichlorotoluene are 20 mg/Nnf. Maximum total heavy metal emissions are 1.5 mg/Nnf. 

Dimethylpyrazine 1-oxide (52) does not appear to react at the exocyclic oxygen with methyl iodide or benzyl chloride but instead reacts at N-4 to form the quaternary salt 53. ... 

Reaction of dibenzylamine with ethylene oxide affords the amino alcohol, 82. Treatment of that product with thionyl chloride gives the a-sympathetic blocking agent, dibenamine (83). (Condensation of phenol with propylene chlorohydrin (84) gives the alcohol, 85. Reaction with thionyl chloride affords the chloride (86). Use of the halide to alkylate ethanolamine affords the secondary amine (87). Alkylation of this last with benzyl chloride... 

It is prepared artificially, for use as a synthetic perfume, by several methods, for example, by heating benzyl chloride with oxide of lead to 100", or by heating benzyl chloride with potassium acetate and saponifying the benzyl acetate so formed, with caustic potash. 

C ( propyl) N phenylmtrone to N phenylmaleimide, 46, 96 semicarbazide hydrochloride to ami noacetone hydiochlonde, 46,1 tetraphenylcyclopentadienone to diphenyl acetylene, 46, 44 Alcohols, synthesis of equatorial, 47, 19 Aldehydes, aromatic, synthesis of, 47, 1 /3-chloro a,0 unsaturated, from ke tones and dimethylformamide-phosphorus oxy chloride, 46, 20 from alky 1 halides, 47, 97 from oxidation of alcohols with dimethyl sulfoxide, dicyclohexyl carbodumide, and pyndimum tnfluoroacetate, 47, 27 Alkylation, of 2 carbomethoxycyclo pentanone with benzyl chloride 45,7... 

Benzylacetophenone has been prepared by the reduction of benzalacetophenone with zinc and acetic acid1 and catalytic-ally with palladium and hydrogen 2 by the reduction of /3-duplo-benzylidene acetophenone monosulfide 3 by the oxidation of the corresponding car bind with chromic acid 4 by the hydrolysis of ethyl benzyl benzoylacetate 5 from acetophenone and benzyl chloride by the action of sodamide 6 and from benzoic and hydrocinnamic adds using as catalysts manganese oxide 7 and ferric oxide.8... 

Piperazine, N-alkylation with benzyl chloride, 42, 19 Piperazine, 1-benzyl-, 42,19 Piperidine, addition to ethylene, 43, 45 as catalyst for Claisen-Schmidt condensation, 41, 40 Piperidine, 1-ethyl-, 43, 45 Piperidine, 1-(2-naphthyl)-, 40,74 Pivalic acid, oxidative coupling to a,a,-a, a -tetramethyladipic add, 40, 92... 

Although, as has already been mentioned, under matrix conditions between 10 and 77 K, there is no oxidative addition of a chloroolefin to nickel or palladium atoms (141), it is evident that this is simply a function of reaction and processing conditions, as it has been shown (68) that oxidative addition to C-C or C-H bonds by nickel atoms leads to pseudocomplexes having Ni C H ratios of 2-5 1 2. Klabunde and co-workers investigated the oxidative addition-reactions of palladium atoms with alkyl halides (73) and benzyl chlorides (74). 

As far as the reactions with benzyl chlorides are concerned (74), the oxidative addition of benzyl chloride and substituted benzyl chlorides to palladium atoms yields rj -benzylpalladium chloride dimers. The parent compound, bis(l,2,3-7 -benzyl)di-/i,-chloro-palladium(II), quantitatively adds four molecules of PEts by first forcing the rj -benzyl-iy -benzyl transformation, with subsequent breakage of the Pd-Cl bridges to form trans-bistPEtsKbenzyDchloroPddI). The spectral characteristics of the parent molecule are indicative of the allylic type of bonding. Similar i7 -benzyl compounds were formed from 4-methylbenzyl chloride, 2-chloro-l,l,l-trifluoro-2-phenylethane, and 3,4-dimethylbenzyl chloride. 

Sulphated zirconia catalysts can be acidic or superacidic depending on the method of treatment. A variety of acid-catalysed reactions, referred to earlier in this section, can be carried out with sulphated zirconia. Yadav and Nair (1999) have given a state-of-the art review on this subject. Examples of benzylation of benzene with benzyl chloride / benzyl alcohol, alkylation of o-xylene with. styrene, alkylation of diphenyl oxide with 1-dodecene, isomerization of epoxides to aldehydes, acylation of benzene / chlorobenzene with p-chloro benzoylchloride, etc. are covered in the review. 

---