Environmental heavy metal determination

For chemical monitoring, a list of priority substances has been established that includes metals such as cadmium, lead, and nickel. As far as metals are concerned, voltammetric techniques and more precisely electrochemical stripping analysis has long been recognized as a powerful technique in environmental samples. In particular, anodic stripping voltammetry (ASV) coupled with screen-printed electrodes (SPEs) is a great simplification in the design and operation of on site heavy metal determination in water, for reasons of cost, simplicity, speed, sensitivity, portability and simultaneous multi-analyte capabilities. The wide applications in the field for heavy metal detection were extensively reviewed (Honeychurch and Hart, 2003 Palchetti et al., 2005). 

Historically, electrochemical stripping analysis, commonly using anodic stripping voltammetry (ASV), has been widely recognized as a powerful technique for heavy-metal detection because of the simplicity of the instrument as well as its moderate cost and portability. Moreover, the ASV technique combined with SPEs can handle all scenarios that require rapid, inexpensive, sensitive, and accurate determination in the field of environmental monitoring. Most studies of heavy-metal determination using SPEs show that mercury, gold, silver, bismuth, or other materials that modify the surface of SPEs can improve selectivity or sensitivity. ... 

Roa Morales G, Ramirez Silva MT, Romero Romo MM, Galicia L (2005) Heavy metal determination by anodic stripping voltammetry with a carhon paste electrode modified with alpha -cyclodextrin. In Palomar M (ed) Applications of Analytical Chemistry in Environmental Research, Research Signpost, Trivandrum, India... 

Chemical Properties. Elemental analysis, impurity content, and stoichiometry are determined by chemical or iastmmental analysis. The use of iastmmental analytical methods (qv) is increasing because these ate usually faster, can be automated, and can be used to determine very small concentrations of elements (see Trace AND RESIDUE ANALYSIS). Atomic absorption spectroscopy and x-ray fluorescence methods are the most useful iastmmental techniques ia determining chemical compositions of inorganic pigments. Chemical analysis of principal components is carried out to determine pigment stoichiometry. Analysis of trace elements is important. The presence of undesirable elements, such as heavy metals, even in small amounts, can make the pigment unusable for environmental reasons. 

The determination of heavy metals at trace levels is important in the field of environmental analysis. This problem can be solved by the help of highly selective sorbents. 

Precipitation reactions have many applications. One is to make compounds. The strategy is to choose starting solutions that form a precipitate of the desired insoluble compound when they are mixed. Then we can separate the insoluble compound from the reaction mixture by filtration. Another application is in chemical analysis. In qualitative analysis—the determination of the substances present in a sample—the formation of a precipitate is used to confirm the identity of certain ions. In quantitative analysis, the aim is to determine the amount of each substance or element present. In particular, in gravimetric analysis, the amount of substance present is determined by measurements of mass. In this application, an insoluble compound is precipitated, the precipitate is filtered off and weighed, and from its mass the amount of a substance in one of the original solutions is calculated (Fig. 1.6). Gravimetric analysis can be used in environmental monitoring to find out how much of a heavy metal ion, such as lead or mercury, is in a sample of water. 

In a separate study, Igwe and Abia46 determined the equilibrium adsorption isotherms of Cd(II), Pb(II), and Zn(II) ions and detoxification of wastewater using unmodified and ethylenediamine tetraacetic acid (EDTA)-modified maize husks as a biosorbent. This study established that maize husks are excellent adsorbents for the removal of these metal ions, with the amount of metal ions adsorbed increasing as the initial concentrations increased. The study further established that EDTA modification of maize husks enhances the adsorption capacity of maize husks, which is attributed to the chelating ability of EDTA. Therefore, this study demonstrates that maize husks, which are generally considered as biomass waste, may be used as adsorbents for heavy metal removal from wastewater streams from various industries and would therefore find application in various parts of the world where development is closely tied to affordable cost as well as environmental cleanliness.46... 

Woolley DE University of California, Davis, CA To determine immediate and long-term effects of exposure to environmental toxicants, especially insecticides and heavy metals (rat) U. S. Department of Agriculture... 

Evans, R. D., Richner, P., and Outridge, P.M. (1995). Micro-spatial variations of heavy metals in the teeth of Walrus as determined by laser ablation ICP-MS The potential for reconstructing a history of metal exposure. Archives of Environmental Contamination and Toxicology 28 55-60. 

Klenke et al. [5] described a technique for extraction of humic and fulvic acids from stream sediments and outlined methods for their determination. By means of flame atomic absorption spectrometry, the levels of environmentally important heavy metals (cadmium, copper, chromium, cobalt, nickel and lead) in the fulvic and humic acid extracts were compared with those in the original sediment samples. The pattern distribution of the respective metals in the two cases showed very close agreement, suggesting that the combined extract of humic and fulvic acids could be used as an indicator of the level of heavy metal pollution in flowing waters. 

Possible environmental applications of NIR probes include the measurement of trace amounts of metal pollutants in surface and ground waters and water saturated soils and sediments and the detection of lead, chromium, and other heavy metal ions for efforts in pollution control. Also OFCD could assist in the determination of caustic soda and chlorine contents in wastewaters. 

The trace metals listed in Table 11.2 (with the inclusion of Sn) are of particular concern as they are toxic at low concentrations. For historical reasons, these elements are commonly referred to as the heavy metals. The degree to which the heavy metals cause toxic effects is dependent on their concentration, chemical speciation, and other environmental conditions, such as temperature. As illustrated in Table 28.6, the type and physiological state of the target organism are also important as these fectors determine the degree to which internal metabolic processes can detoxify or eliminate the pollutant. 

Methods based on the inhibitory effect of the analyte and the use of an enzyme thermistor have primarily been applied to environmental samples and typically involve measuring the inhibitory effect of a pollutant on an enzyme or on the metabolism of appropriate cells [162]. The inhibiting effect of urease was used to develop methods for the determination of heavy metals such as Hg(II), Cu(II) and Ag(I) by use of the enzyme immobilized on CPG. For this purpose, the response obtained for a 0.5-mL standard pulse of urea in phosphate buffer at a flow-rate of 1 mL/min was recorded, after which 0.5 mL of sample was injected. A new 0.5-mL pulse of urea was injected 30 s after the sample pulse (accurate timing was essential) and the response compared with that of the non-inhibited peak. After a sample was run, the initial response could be restored by washing the column with 0.1-0.3 M Nal plus 50 mM EDTA for 3 min. Under these conditions, 50% inhibition (half the initial response) was obtained for a 0.5-mL pulse of 0.04-0.05 mM Hg(II) or Ag(I), or 0.3 mM Cu(II). In some cases, the enzyme was inhibited irreversibly. In this situation, a reversible enzyme immobilization technique... 

For these reasons, microbial sensors are less suitable for the determination of individual analytes. However, some practical apphcations for biosensors based on enzymes or antibodies for the specific determination of environmentally relevant compounds can be expected soon [11]. Furthermore, in some cases defined specific metabolic pathways in microorganisms are used, leading to microbial sensors for more selective analysis for those environmental pollutants which cannot be measured by the use of simple enzyme reactions, e.g., aromatic compounds and heavy metals. In this context it is also important to mention the aspect of bio availability, a parameter which is included by the measuring procedure of microbial sensors as an integral effect. 

Environmental Defence recently released Toxic Nation A Report on Pollution in Canadians (Environmental Defence 2005). Samples were collected from 11 people for the presence of 88 chemicals, including heavy metals, PBDEs, PCBs, perfluorinated chemicals, organochlorine pesticides, organophosphorus-insecticide metabolites, and VOCs. The study objectives included determining whether pollutants were present at measurable concentrations in Canadians, identifying chemicals of concern, and creating public awareness of methods for avoiding exposure. 

DETERMINATION OF THE HEAVY METAL BINDING CAPACITY (HMBC) OF ENVIRONMENTAL SAMPLES... 

Bitton, G., Campbell, M. and Koopman, B. (1992a) MetPAD A bioassay kit for the specific determination of heavy metal toxicity in sediments from hazardous waste sites, Environmental... 

Often, many simultaneously occurring pollutants or contaminants determine an environmental problem. In industry, agriculture, and households, products are often mixtures of many compounds. The process of production and consumption is accompanied by emissions and consequently by contamination. One example is the use of toxaphene in the past, a very complex mixture of polychlorinated camphenes, as a pesticide. Technical toxaphene consists of more than 175 individual compounds. A second example is industrial and domestic emissions resulting from the combustion of fossil fuels. The emissions contain both a mixture of gases (SO2, NOx, CO2, etc.) and airborne particulate matter which itself contains a broad range of heavy metals and also polycyclic aromatic hydrocarbons (PAH). 

Nowadays modern instrumental analytical methods enable largely precise and accurate determination of total concentrations of heavy metals in environmental compartments. The assessment of toxicologically relevant levels in river water on the basis of total concentrations is connected with the following ... 

Clayton, P.M. and Tiller, K.G. (1979) A chemical method for the determination of the heavy metal content of soils in environmental studies. CSIRO Div. of Soils Tech. Papers, 41,17 pp. 

As defined in Section 6.8, a xenobiotic species is one that is foreign to living systems. Common examples include heavy metals, such as lead, which serve no physiologic function, and synthetic organic compounds, which are not made in nature. Exposure of organisms to xenobiotic materials is a very important consideration in environmental and toxicological chemistry. Therefore, the determination of exposure by various analytical techniques is one of the more crucial aspects of environmental chemistry. 

---