Environment and risks

Wiehterlova, B Sobalik, Z Vondrova, A. Differences in the strueture of eopper aetive sites for deeomposition and seleetive reduction of nitric oxide with hydroearbons and ammonia, Catal. Today, 1996, Volume 29, Issues 1-4, 149-153, Seeond Japan-EC Joint Workshop on the Frontiers of Catalytic Science and Technology for Energy, Environment and Risk Prevention... 

The AcuSafe website provides a comprehensive electronic newsletter entitled AcuSafe News. Their newsletter is devoted to serving industry, government, and interested members of the public by providing process safety practices, incident news, lessons learned, and regulatory developments. Hazard View is a source of advice, comments, and information about major accident hazards in the process industries. It is for safety, environment, and risk professionals. Their View Library has a number of vivid images of the damages from accidents. [1]... 

Intrauterine hormonal environment and risk of developing anorexia nervosa. Arch. Gen. Psychiatry. 64 1402—1407. 

Modified 9 Cr-lMo (T91) has been chosen for steam generators because of its satisfactory strength at high temperature, freedom from stress corrosion cracking (problem with stainless steels both for chloride and caustic environment) and risk of decarburisaiton (problem with 2.25 Cr-lMo). 

Lisa M. Bendixen is a principal in the environment and risk practice at Arthur D. Little, Inc. Since joining the company in 1980, Ms. Bendixen has been involved in risk manage-... 

Leadership must address the safety issues (hazards) existing in the environment and risks that occur in working situations. Leadership must deal with management system inadequacies. 

A mixture of qualitative and quantitative methods was used in this work. These include reliability analysis, eapital investment costs, safety, feasibility and environmental impaet assessment (ElA). Tools used include failure mode and effect analysis (FMEA), environmental impaet assessment, and risk analysis. FMEA was used to conduct a reliability analysis, EIA was used to calculate the concentration of the flared gas eomposition partieles affeeting the local environment, and risk assessment was employed to find out the hazards and exposure in the case study in order to assure safety. Cost estimation was used to ealculate the capital investment cost for each option considered. Information and expert opinions were eaptured through interviews and questionnaires. 

Climate for Monitoring of Work Environment and Risk Prevention Priorities ... 

The efforts for more efficient food production to feed the increasing human population require new and efficient, envirormientally sustainable and poUinator-friendly pest control strategies in crop plant protection. Terpenoids produced by crop plants or their companion plants could be one important tool to advance to that direction. Applications that minimize the harm for the environment and risk of development of resistant pest populations are needed. The principles of terpenoid-based natural indirect herbivore defense should be assessed more thoroughly to steer plant breeding to better include these properties in future cultivars. 

Integration of methods for quality, environment and risk management into designing process... 

Organise the project and supervise to ensure that work is carried out to agreed standards of safety and quality, with minimum impact on the environment and risk to workers, equipment and materials... 

The components of a risk analysis involve the estimation of the frequency of an event, an estimation of the consequences (the extent of the material or energy release and its impact on population, property, or environment), and the selection and generation of the estimate of risk itself. 

Provide a range of criteria and techniques to be considered in the development, design, operation, and maintenance of batch reaction systems to reduce risk and ensure safety of people, environment, and property. 

In general, the risk of human error ean he redueed hy properly designing the equipment, proeedures, and the work environment and hy proper staffing, training, and implementation of management eontrols. 

The gas quality feeding the dry faee seal should be elean and dry. Due to the possibility of eondensation of the proeess gas in the seal eavity, it was deeided to use a seal gas heater. The heater eontrol was set to provide warm gas at 15°C above the dew point to ensure no eondensate entered the seal eavity. Also, a dual filter in series with 5 and 2 p filtration elements was ehosen to provide an ideal sealing environment and maintain the optimum performanee of the seal. To reduee the risk of seal damage during reverse rotation of the turboexpander, programming logie was set to open the eompressor bypass valve whenever a shutdown impulse was initiated. 

Refer to the handbook s Glossary. The definitions provided are universally recognized. Many of these terms are not just pertinent to inhalation hazards. It would be remiss not to mention other risks beyond inhalation from chemical exposure in a work environment and to the general public. 

The solids that result from wastewater treatment may contain concentrated levels of contaminants that were originally contained in the wastewater. A great deal of concern must be directed to the proper disposal of these solids to protect environmental considerations. Failure to do this may result in a mere shifting of the original pollutants in the waste stream to the fmal disposal site where they may again become free to contaminate the environment and possibly place the public at risk. A more reasonable approach to ultimate solids disposal is to view the sludge... 

The harmful effects of industrial emissions are not confined to the workers but extend beyond the plant boundary line. Chemically-induced diseases among workers exposed to industrial chemicals are a warning sign of the risks to which a larger population is also being exposed usually the chemical hazards are in principle similar in the occupational and general environment. However, occasionally environmental exposures can be qualitatively different from the occupational environment and may also cause deleterious health effects in the general population. 

Ljungqvist and Reinmiiller have described contamination risks in clean environments and have estimated the critical contamination region in un-... 

Using formalized risk assessment techniques for industrial ventilation projects may complicate the issue more than necessary. The work environment and its exposure conditions are the focus. However, when evaluating new technology, including waste management, the risk assessment approach may be valuable. 

Most human or environmental healtli hazards can be evaluated by dissecting tlie analysis into four parts liazard identification, dose-response assessment or hazard assessment, exposure assessment, and risk characterization. For some perceived healtli liazards, tlie risk assessment might stop with tlie first step, liazard identification, if no adverse effect is identified or if an agency elects to take regulatory action witliout furtlier analysis. Regarding liazard identification, a hazard is defined as a toxic agent or a set of conditions that luis the potential to cause adverse effects to hmnan health or tlie environment. Healtli hazard identification involves an evaluation of various forms of information in order to identify the different liaz.ards. Dose-response or toxicity assessment is required in an overall assessment responses/cffects can vary widely since all chemicals and contaminants vary in their capacity to cause adverse effects. This step frequently requires that assumptions be made to relate... 

---