Engineering, Division of

Chemical Engineering, Division of Chranical Process Engineering Graduate School of Engineering, Hokkaido University, N13W8, Kita-Ku, Sapporo, 060-8628, Japan tago eng.hokudai.ac.jp... 

The authors wish to express their sincere appreciation to staff members of the Thermodynamics Research Center (TRC), part of the Chemical Engineering Division of the Texas Engineering Experiment Station in The Texas A M University System. Our special thanks to Munaf Chasmawala and Cheryl Clark for their assistance in data collection and entry, formatting the text, preparing the graphs, and composing the camera-ready copy of the manuscript. 

Gehlin, S., 1998. Thermal Response Test, In-Sim Measurements of Thermal Properties in Hard Rock, Licentiate Thesis, No. 37, Lulea University of Technology, Department of Environmental Engineering, Division of Water Resources Engineering, 41 pp. 

Hokkaido University Graduate School of Engineering Division of Urban Environmental Engineering, N13-W8 Sapporo 060-8628,Japan... 

Department of Materials Science and Engineering Division of Metallurgy/ Heat and Furnace Technology S-100 44 Stockholm, SWEDEN... 

This volume is dedicated to Dr. Wolf-Dieter Deckwer on the occasion of his 60th birthday. He is Professor of Biochemical Engineering at the Technical University Braunschweig, Head of the Biochemical Engineering Division of the German Research Centre for Biotechnology, Braunschweig and member of the Advisory Boards of several international periodicals. 

Meikrantz, D.H., Law, J., Todd, T. 2007. Design attributes and scale up testing of annular centrifugal contactors. Chemical Engineering Division of the AIChE Spring National Meeting, April 10-14, 2005, Atlanta, GA. INL/CON-05-00088. 

Church, L. (1935). History of Com Planters. USDA, Bureau of Agriculture Chemistry and Engineering, Division of Mechanical Equipment, Inf. Ser. Nor. 69. Washington, DC. 

Department of Chemical Engineering, Division of Polymer Chemistry, Eindhoven University of Technology, PO Box 513, 5612 MB Eindhoven, The Netherlands... 

Biochemistry Option, Divisions of Biology and Chemistry and Chemical Engineering Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, and tBios Group INC, Santa Fe, New Mexico 87501... 

Nutter Engineering, Division of Patterson-Kelley Co.—HARSCO Corporation, Unpublished data. 

I. Deanin, Rudolph D., 1921- II. Crugnola, Aldo M., 1928- III. American Chemical Society. Division of Organic Coatings and Plastics Chemistry. IV. Society of Plastics Engineers. Division of Engineering Properties and Structures. V. Series American Chemical Society. Advances in chemistry series 154. 

The Total Human Exposme Risk DataBase and Advanced Simulation Environment (THERdbASE) is a data/model management system which contains total human exposure information. THERdbASE is a USEPA-sponsored modeling platform which is being developed and upgraded by the Exposure Modeling and Software Engineering Division of InfoScientific, Inc. (Butler and Engelman, 1998). 

Materials Process Engineering, Division of Materials Science and Engineering,... 

Developed from a symposium sponsored by the Division of Polymeric Materials Science and Engineering of the American Chemical Society and the Macromolecular Science Engineering Division of the Chemical Institute of Canada at the Third Chemical Congress of North America (195 th National Meeting of the American Chemical Society), Toronto, Ontario, Canada,... 

A separation unit produces a pure hydrocarbon compound with a concentration not high enough to economically justify recovering and recycling it. The engineering division of the company has made a decision that it would be worthwhile to combust... 

The classical Purex process was designed to produce nearly pure uranium and plutonium. The Chemical Engineering Division of Argonne National Laboratory has demonstrated UREX+, an advanced aqueous process with five extraction trains that split commercial reactor spent fuel into five streams 1) a nearly pure uranium stream (95.5% of the heavy metal in the spent fuel) 2) technetium sent to transmutation (0.08 /o) 3) Pu/Np converted to MOX fuel for LWR fuel and Am/Cm for transmutation or fast-flux reactor fuel (0.962 /o) 4) Cs/Sb decay heat producers sent to interim decay storage (0.017 /o) and 5) a mixed fission product stream (3.44 /o) composed of gases and solids incorporated into a waste form for geological repository disposal.f The percentages shown are computed from Table 1. 

The chemicals are not consumed, and are recycled. Chemical Engineering Division of ANL is currently... 

Based on thermodynamic analysis, the efficiency of the Cu-Cl cycle is 29% which is less than the efficiency calculated by the Chemical Engineering Division of ANL (41%). 

Seader, J. D., Use of Computers in Teaching Process Design. Presented at the Chemical Engineering Division of the American Society for Engineering Education s Summer School for Chemical Engineering Educators, Santa Barbara, CA. August 1982. 

Tornado Mill - A type of hammer mill supplied by Tornado Engineering Division of Solus Industries, Niagara Falls, New York. 

Figure 1.2 Expanded view of the internals of a batch reactor. Courtesy of Autodave Engineers, Division of Snap-tite, Jnc.

The AIChE not only refused to establish operating sections in Canada, but only by special request did it permit the establishment of student chapters. The two primary ones that were established and existed for many years were at U.B.C. and McGill. It was also possible for such a student chapter to be an affiliated student chapter of the Chemical Engineering Division of the CIC and later of the Canadian Society of Chemical Engineering (CSChE) at the same time. It is undoubtedly true that the formation of the CSChE in 1966, which preceded the forming of similar Canadian societies in other engineering disciplines, by almost 10 years, was accelerated by this indirect type of... 

Sanitary Engineering Research Laboratory, Department of Civil Engineering, Division of Hydraulic and Sanitary Engineering, University of California, Berkeley, Calif. 

I HE Reactor Engineering Division of the Argonne National Laboratory is currently working on the design of a sodium-cooled fast reactor. Figure 1 shows the complexity of equipment that must remain compatible with, and operate in sodium at temperatures ranging from 580° to 900 °F. 

The authors are grateful to Miss T. Scott and Mr. E. Funke of the Mechanical Engineering Division of NRC (Analysis Section) for the programming and computation. 

This work forms part of a research program on the adhesion of polymers supported by a research grant from the Engineering Division of the National Science Foundation. The authors are also indebted to Richard Burgan of these laboratories for the design and construction of electronic apparatus and to P. Dreyfuss and M. L. Runge for helpful comments on interpretation of IR data. 

---