Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

1.3- dipolar cycloaddition reactions examples

The stereochemistry of the 1,3-dipolar cycloaddition reaction is analogous to that of the Diels-Alder reaction and is a stereospecific syn addition. Diazomethane, for example, adds stereospecifically to the diesters 43 and 44 to yield the pyrazolines 45 and 46, respectively. [Pg.646]

Whereas there are numerous examples of the application of the products from diastereoselective 1,3-dipolar cycloaddition reaction in synthesis [7, 8], there are only very few examples on the application of the products from metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction in the synthesis of potential target molecules. The reason for this may be due to the fact that most metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction have been carried out on model systems that have not been optimized for further derivatization. One exception of this is the synthesis of a / -lactam by Kobayashi and Kawamura [84]. The isoxazoli-dine endo-21h, which was obtained in 96% ee from the Yb(OTf)3-BINOL-catalyzed... [Pg.239]

This chapter will try to cover some developments in the theoretical understanding of metal-catalyzed cycloaddition reactions. The reactions to be discussed below are related to the other chapters in this book in an attempt to obtain a coherent picture of the metal-catalyzed reactions discussed. The intention with this chapter is not to go into details of the theoretical methods used for the calculations - the reader must go to the original literature to obtain this information. The examples chosen are related to the different chapters, i.e. this chapter will cover carbo-Diels-Alder, hetero-Diels-Alder and 1,3-dipolar cycloaddition reactions. Each section will start with a description of the reactions considered, based on the frontier molecular orbital approach, in an attempt for the reader to understand the basis molecular orbital concepts for the reaction. [Pg.301]

The importance of the 1,3-dipolar cycloaddition reaction for the synthesis of five-membered heterocycles arises from the many possible dipole/dipolarophile combinations. Five-membered heterocycles are often found as structural subunits of natural products. Furthermore an intramolecular variant makes possible the formation of more complex structures from relatively simple starting materials. For example the tricyclic compound 10 is formed from 9 by an intramolecular cycloaddition in 80% yield ... [Pg.76]

An interpretation based on frontier molecular orbital theory of the regiochemistry of Diels Alder and 1,3-dipolar cycloaddition reactions of the triazepine 3 is available.343 2,4,6-Trimethyl-benzonitrile oxide, for example, yields initially the adduct 6.344... [Pg.458]

The first [3S+2C] cycloaddition reaction using a Fischer carbene complex was accomplished by Fischer et al. in 1973 when they reported the reaction of the pentacarbonyl(ethoxy)(phenylethynyl)carbene complex of tungsten and diazomethane to give a pyrazole derivative [45]. But it was 13 years later when Chan and Wulff demonstrated that in fact this was the first example of a 1,3-dipolar cycloaddition reaction [46,47a]. The introduction of a bulky trime-thylsilyl group on the diazomethane in order to prevent carbene-carbon olefi-nation leads to the corresponding pyrazole carbene complexes in better yields (Scheme 15). [Pg.72]

To control the stereochemistry of 1,3-dipolar cycloaddition reactions, chiral auxiliaries are introduced into either the dipole-part or dipolarophile. A recent monograph covers this topic extensively 70 therefore, only typical examples are presented here. Alkenes employed in asymmetric 1,3-cycloaddition can be divided into three main groups (1) chiral allylic alcohols, (2) chiral amines, and (3) chiral vinyl sulfoxides or vinylphosphine oxides.63c... [Pg.251]

Various kinds of chiral acyclic nitrones have been devised, and they have been used extensively in 1,3-dipolar cycloaddition reactions, which are documented in recent reviews.63 Typical chiral acyclic nitrones that have been used in asymmetric cycloadditions are illustrated in Scheme 8.15. Several recent applications of these chiral nitrones to organic synthesis are presented here. For example, the addition of the sodium enolate of methyl acetate to IV-benzyl nitrone derived from D-glyceraldehyde affords the 3-substituted isoxazolin-5-one with a high syn selectivity. Further elaboration leads to the preparation of the isoxazolidine nucleoside analog in enantiomerically pure form (Eq. 8.52).78... [Pg.254]

Click chemistry has been particularly active in various fields this year. For example, ample applications of click chemistry have been seen in carbohydrate chemistry. Various /weiido-oligosacchardies and amino acid glycoconjugates were synthesized via an intermolecular 1,3-dipolar cycloaddition reaction using easily accessible carbohydrate and amino acid derived azides and alkynes as building blocks <06JOC364>. The iterative copper(I)-catalyzed... [Pg.227]

Diels-Alder reactions [31] and 1,3-dipolar cycloadditions [32, 33] have been performed by use of this methodology. For example, Diaz-Ortiz described the hetero-Diels-Alder and 1,3-dipolar cycloaddition reactions of ketene acetals. The reactions were improved and products were isolated directly from the crude reaction mixture without polymerization of the ketene acetals [34],... [Pg.299]

More recently, some examples of intramolecular Diels-Alder and tandem intramolecular Diels-Alder/l,3-dipolar cycloaddition reactions of especially designed 1,3,4-oxadiazole derivatives have been described (Scheme 3). The... [Pg.407]

Benzonitrile oxide and mesitonitrile oxide undergo 1,3-dipolar cycloaddition reactions with 1,3,5-triphosphinines under mild conditions to afford fused heterocyclic compounds (Scheme 1.33), for example, 192 and 193. Oxaphosphazoles and oxadiphospholes have become accessible by thermal fragmentation reactions of such fused heterocyclic compounds (358). [Pg.59]

A strategy based on the diastereoselective dipolar cycloaddition reaction of nitrile oxides and allylic alcoholates, has been applied to the synthesis of bis-(isoxazolines) that are precursors to polyketide fragments. These intermediates can be elaborated into protected polyols, for example, 439, by sequential chemos-elective reductive opening of each isoxazoline or, alternatively, by simultaneously, providing access to all stereoisomers of this carbon skeleton (479). [Pg.96]

Intermolecular Reactions Intermolecular 1,3-dipolar cycloaddition reactions of nitrones to olefins seem to be the most studied. They are widely used for the synthesis of different enantiomerically pure compounds, including biologically active ones. For example, two new glycosidase inhibitors have been obtained by the nitrone cycloaddition strategy (Fig. 2.32) (733). [Pg.314]

The use of nitriles as dipolarophiles in 1,3-dipolar cycloaddition reactions is scarce because of their relative inertness in such reactions. Indeed, nitriles with electron-donor substituents do not react with nitrones even under harsh conditions. Hence, an additional activation of the reactants is required. This can be achieved, either by activating the nitrile (dipolarophile) or the nitrone (dipole), or both of them. For example, the reaction of electron-difficient nitriles such as... [Pg.376]

Examples of [3 + 2]- (or 1,3-dipolar) cycloaddition reactions have been known for many years. However, only after the main principles of this type of transformations have been formulated by Huisgen (333), [3+ 2]-cycloaddition became one of the most important tools in organic synthesis (334, 335). Actually, the simultaneous formation of two new bonds makes it possible to efficiently assemble a complex molecule from simple and readily available precursors. Due to... [Pg.541]

The general method, that has been widely used for the synthesis of perhydropyrrolo[1,2-6]isoxazoles, is based on a cycloaddition reaction of cyclic nitrones with dipolarophiles. The nitrone is easily available by oxidation of the corresponding hydroxylamine with mercuric chloride. The cycloaddition of nitrone to dipolarophiles is highly regioselective and stereoselective and have been often applied in the total synthesis of natural products <20010L1367, 2004BML3967, 2005JOC3157>. As one representative example of dipolar cycloaddition, reaction... [Pg.67]

Accordingly, many reactions can be performed on the sidewalls of the CNTs, such as halogenation, hydrogenation, radical, electrophilic and nucleophilic additions, and so on [25, 37, 39, 42-44]. Exhaustively explored examples are the nitrene cycloaddition, the 1,3-dipolar cycloaddition reaction (with azomethinylides), radical additions using diazonium salts or radical addition of aromatic/phenyl primary amines. The aryl diazonium reduction can be performed by electrochemical means by forming a phenyl radical (by the extrusion of N2) that couples to a double bond [44]. Similarly, electrochemical oxidation of aromatic or aliphatic primary amines yields an amine radical that can be added to the double bond on the carbon surface. The direct covalent attachment of functional moieties to the sidewalls strongly enhances the solubility of the nanotubes in solvents and can also be tailored for different... [Pg.131]

The rhodium( 11)-catalyzed formation of 1,3-dipoles has played a major role in facilitating the use of the dipolar cycloaddition reaction in modern organic synthesis. This is apparent from the increasing number of applications of this chemistry for the construction of heterocyclic and natural product ring systems. This chapter initially focuses on those aspects of rhodium(II) catalysis that control dipole formation and reactivity, and concludes with a sampling of the myriad examples that exist in the Hterature today. [Pg.433]

As with any modern review of the chemical Hterature, the subject discussed in this chapter touches upon topics that are the focus of related books and articles. For example, there is a well recognized tome on the 1,3-dipolar cycloaddition reaction that is an excellent introduction to the many varieties of this transformation [1]. More specific reviews involving the use of rhodium(II) in carbonyl ylide cycloadditions [2] and intramolecular 1,3-dipolar cycloaddition reactions have also appeared [3, 4]. The use of rhodium for the creation and reaction of carbenes as electrophilic species [5, 6], their use in intramolecular carbenoid reactions [7], and the formation of ylides via the reaction with heteroatoms have also been described [8]. Reviews of rhodium(II) ligand-based chemoselectivity [9], rhodium(11)-mediated macrocyclizations [10], and asymmetric rho-dium(II)-carbene transformations [11, 12] detail the multiple aspects of control and applications that make this such a powerful chemical transformation. In addition to these reviews, several books have appeared since around 1998 describing the catalytic reactions of diazo compounds [13], cycloaddition reactions in organic synthesis [14], and synthetic applications of the 1,3-dipolar cycloaddition [15]. [Pg.433]

On the other hand, reactions of nitrile oxides with 1,2-disubstituted olefins are slower and regioselectivity usually was not so high. For example, benzonitrile oxides, obtained from the corresponding chlorooximes 167, undergo 1,3-dipolar cycloaddition reaction with methyl cinnamate to produce the 5-phenyl 168 and 4-phenyl 169 regioisomers in approximately an 80 20 ratio °. However, use of A,iV-diethylcinnamamide as the dipolarophile... [Pg.256]

In addition to the role of substituents in determining regioselectivity, several other structural features affect the reactivity of dipolarophiles. Strain increases reactivity. Norbomene, for example, is consistently more reactive than cyclohexene in 1,3-dipolar cycloadditions. Conjugated functional groups also usually increase reactivity. This increased reactivity has most often been demonstrated with electron-attracting substituents, but for some 1,3-dipoles, enamines, enol ethers, and other alkenes with donor substituents are also quite reactive. Some reactivity data for a series of alkenes with a few 1,3-dipoles are given in Table 6.3. Scheme 6.5 gives some examples of 1,3-dipolar cycloaddition reactions. [Pg.362]

The complete stereoselectivity of the reaction, however, is difficult to reconcile with a two-step process. This earlier controversy, however, has long since been resolved. For example, when considering results of the cycloaddition of p-nitrobenzonitrile oxide with cis- and trani-l,2-dideuterioethylene (111), the experiments clearly established that, within experimental limits of detection, the reaction is > 98% stereoselective. If diradical intermediates were operative, significant scrambling of configuration should be observed in the products. These and other results confirm a concerted mechanism for the 1,3-dipolar cycloaddition reaction (15). [Pg.375]

In a series of papers, Laude and co-workers (144-149) examined 1,3-dipolar cycloaddition reactions of mtinchnone imines derived from Reissert compounds. For example, mtinchnone imine 241 undergoes a smooth intramolecular 1,3-dipolar cycloaddition with the tethered alkyne unit to afford pyrrole 242 after extrusion of HNCO (144). [Pg.723]

This chapter deals mainly with the 1,3-dipolar cycloaddition reactions of three 1,3-dipoles azomethine ylides, nitrile oxides, and nitrones. These three have been relatively well investigated, and examples of external reagent-mediated stereocontrolled cycloadditions of other 1,3-dipoles are quite limited. Both nitrile oxides and nitrones are 1,3-dipoles whose cycloaddition reactions with alkene dipolarophiles produce 2-isoxazolines and isoxazolidines, their dihydro derivatives. These two heterocycles have long been used as intermediates in a variety of synthetic applications because their rich functionality. When subjected to reductive cleavage of the N—O bonds of these heterocycles, for example, important building blocks such as p-hydroxy ketones (aldols), a,p-unsaturated ketones, y-amino alcohols, and so on are produced (7-12). Stereocontrolled and/or enantiocontrolled cycloadditions of nitrones are the most widely developed (6,13). Examples of enantioselective Lewis acid catalyzed 1,3-dipolar cycloadditions are summarized by J0rgensen in Chapter 12 of this book, and will not be discussed further here. [Pg.757]

Dipolar Cycloaddition Reactions. Dehydroamino acid derivatives behave as dipolarophiles in 1,3-dipolar cycloaddition reactions that leads to a variety of interesting compounds. For example, 1,3-dipolar cycloaddition of diazomethane to dehydroamino acid esters 475 and 481 gives the corresponding pyrazolines 476 and... [Pg.234]

There have been a few examples of acyclic compounds being converted into the heterocyclic compounds of interest in this chapter however, these tend to employ 1,3-dipolar cycloaddition reactions, and as such will be covered in Section 10.04.9.3. The notable new synthetic routes are outlined below. [Pg.174]

The parent ion is observable in most of the spectra that have been recorded, and in some instances it is the base peak. An M+ - 28 ion also appears in most examples,11,16,30,43,103,104,135 accurate mass measurements having shown this to arise from loss of N2.103 Breakdown patterns for three substituted aryl derivatives (62, Scheme 21) are essentially the same as for their benzodiazepine isomers.103 Some examples have been reported in which extrusion of a disubstituted alkyne by a reverse 1,3-dipolar cycloaddition reaction is an important process.135... [Pg.30]


See other pages where 1.3- dipolar cycloaddition reactions examples is mentioned: [Pg.228]    [Pg.285]    [Pg.150]    [Pg.383]    [Pg.116]    [Pg.222]    [Pg.250]    [Pg.26]    [Pg.39]    [Pg.50]    [Pg.65]    [Pg.374]    [Pg.438]    [Pg.112]    [Pg.251]    [Pg.298]    [Pg.2]    [Pg.589]    [Pg.729]    [Pg.732]    [Pg.744]    [Pg.47]   
See also in sourсe #XX -- [ Pg.885 ]




SEARCH



1.3- Dipolar reactions

1.3- dipolar cycloadditions examples

Cycloaddition examples

Cycloaddition reactions 1,3-dipolar

Cycloaddition reactions examples

Cycloadditions 1,3-dipolar reactions

Cycloadditions example

Dipolar examples

Examples reaction

© 2024 chempedia.info