Reactivity data

The importance of all this work lies in the fact that it established for the first time that chemical reactivity data for a wide series of reactions can be put onto a quantitative footing. With continuing research, however, it was found that the various chemical systems required quite specific substituent constants of their own, leading to a decline in interest in LEER. Nevertheless, substituent constant scales are still in use and methods for calculating or correlating them are still of interest [12]. 

Additional gas-phase reactivity data, such as gas-phase acidities of alcohols [41], proton affinities of alcohols and ethers [41], and proton affinities of carbonyl compounds [42] could equally well be described by similar equations. 

Theoretical studies and quantitative reactivity data are lacking for this series of compounds. 

The nucleophilic reactivity of 2-halogenothiazoles is strongly affected by the substituent effect, depending on the kind of substitution reaction. Positions 4 and 5 can be considered as meta and para , respectively, with regard to carbon 2 and to groups linked to it consequently, it is possible to correlate the reactivity data with Hammett s relationships. 

Information pertaining to the hazards of the chemicals used in the process. This should contain at least the following information toxicity, flammability, permissible exposure limits, physical data, reactivity data, corrosivity data, thermal and chemical stability data, and hazardous effects of inadvertent mixing of different materials that could occur. 

Both the reactivity data in Tables 11.3 and 11.4 and the regiochemical relationships in Scheme 11.3 ean be understood on the basis of frontier orbital theory. In reactions of types A and B illustrated in Seheme 11.3, the frontier orbitals will be the diene HOMO and the dienophile LUMO. This is illustrated in Fig. 11.12. This will be the strongest interaction because the donor substituent on the diene will raise the diene orbitals in energy whereas the acceptor substituent will lower the dienophile orbitals. The strongest interaction will be between j/2 and jc. In reactions of types C and D, the pairing of diene LUMO and dienophile HOMO will be expected to be the strongest interaction because of the substituent effects, as illustrated in Fig. 11.12. 

Simple alkyl radicals such as methyl are considered to be nonnucleophilic. Methyl radicals are somewhat more reactive toward alkenes bearing electron-withdrawing substituents than towards those with electron-releasing substituents. However, much of this effect can be attributed to the stabilizing effect that these substiments have on the product radical. There is a strong correlation of reaction rate with the overall exothermicity of the reaction. Hydroxymethyl and 2-hydroxy-2-propyl radicals show nucleophilic character. The hydroxymethyl radical shows a slightly enhanced reactivity toward acrylonitrile and acrolein, but a sharply decreased reactivity toward ethyl vinyl ether. Table 12.9 gives some of the reactivity data. 

We have seen that physical properties fail to correlate rate data in any general way, although some limited relationships can be found. Many workers have, therefore, sought alternative measures of solvent behavior as means for correlating and understanding reactivity data. These alternative quantities are the empirical measures described in this section. The adjective empirical in this usage is synonymous with model dependent this is. therefore, an extrathermodynamic approach, entirely analogous to the LFER methods of Chapter 7 with which structure-reactivity relationships can be studied. 

In the benzene series, an approximately linear relationship has been obtained between the chemical shifts of the para-hydrogen in substituted benzenes and Hammett s a-values of the substituents. Attempts have been made, especially by Taft, ° to use the chemical shifts as a quantitative characteristic of the substituent. It is more difficult to correlate the chemical shifts of thiophenes with chemical reactivity data since few quantitative chemical data are available (cf. Section VI,A). Comparing the chemical shifts of the 5-hydrogen in 2-substituted thiophenes and the parahydrogens in substituted benzenes, it is evident that although —I—M-substituents cause similar shifts, large differences are obtained for -j-M-substituents indicating that such substituents may have different effects on the reactivity of the two aromatic systems in question. Differences also... 

The hydroxythiophenes which exist predominantly as the thiolen-2-ones also show reactions characteristic of the enol form. They can be methylated at the oxygen with dimethyl sulfate of diazomethane and they can also be acylated. - - They also react as thio-lene-2-ones showing a reactive methylene group which can be condensed with benzaldehyde. The danger of using chemical reactivity data for drawing conclusion as to the physical state of these tautomerizable systems has been pointed out. ... 

Fig. 2, Correlation of reactivity data (log A ) for the methoxy-dechlorination of substituted 2-chloroquinolmes and 2-chloroquinoxalines.

Giese and Feix65 examined the temperature dependence of the relative reactivity of fumarodinitrilc and methyl a-chloroacrylatc towards a scries of alkyl radicals (Scheme 1.6). The temperature dependence was such that they predicted that the order of reactivity of the radicals would be reversed for temperatures above 280 K (the isosclcctivc temperature - Figure 1.3). This finding clearly indicates the need for care when comparing relative reactivity data.66... 

The reactions of cyanoisopropyl radicals with monomers have been widely studied. Methods used include time resolved EPR spectroscopy,352 radical trappingj53 355 and oligomer00 356 and polymer end group determination. 1 Absolute341 and relative reactivity data obtained using the various methods (Table 3.6) are in broad general agreement. 

Absolute rate constants for addition reactions of cyanoalkyl radicals are significantly lower than for unsubstituted alkyl radicals falling in the range 103-104 M V1.341 The relative reactivity data demonstrate that they possess some electrophilic character. The more electron-rich VAc is very much less reactive than the electron-deficient AN or MA. The relative reactivity of styrene and acrylonitrile towards cyanoisopropyl radicals would seem to show a remarkable temperature dependence that must, from the data shown (Table 3.6), be attributed to a variation in the reactivity of acrylonitrile with temperature and/or other conditions. 

Such relationships were in fact found empirically (168, 169, 231) however, they should be confirmed by use of correct statistics. The whole treatment with temperature-dependent parameters has to be completed with appropriate statistical methods and tested on selected reactivity data (236) before one can judge whether it is worth the effort. Few data available at present fulfil the high demands on accuracy and extent. 

Cross-reactivity data of hapten structures (or derivatives)... 

Apart from the role of substituents in determining regioselectivity, several other structural features affect the reactivity of dipolarophiles. Strain increases reactivity norbornene, for example, is consistently more reactive than cyclohexene in 1,3-DCA reactions. Conjugated functional groups usually increase reactivity. This increased reactivity has most often been demonstrated with electron-attracting substituents, but for some 1,3-dipoles, enol ethers, enamines, and other alkenes with donor substituents are also quite reactive. Some reactivity data for a series of alkenes with several 1,3-dipoles are given in Table 10.6 of Part A. Additional discussion of these reactivity trends can be found in Section 10.3.1 of Part A. 

Hindered lithium dialkylamides can generate aryl-substituted carbenes from benzyl halides.162 Reaction of a,a-dichlorotoluene or a,a-dibromotoluene with potassium r-butoxide in the presence of 18-crown-6 generates the corresponding a-halophenylcarbene.163 The relative reactivity data for carbenes generated under these latter conditions suggest that they are free. The potassium cation would be expected to be strongly solvated by the crown ether and it is evidently not involved in the carbene-generating step. 

Much attention has been devoted to the development of methods to generate quinone methides photochemically,1,19-20 since this provides temporal and spatial control over their formation (and subsequent reaction). In addition, the ability to photogenerate quinone methides enables their study using time-resolved absorption techniques (such as nanosecond laser flash photolysis (LFP)).21 This chapter covers the most important methods for the photogeneration of ortho-, meta-, and para-quinone methides. In addition, spectral and reactivity data are discussed for quinone methides that are characterized by LFP. 

The significance of the values calculated for the effective polarizability was first established with physical data, among them relaxation energies derived from a combination of X-ray photoelectron and Auger spectroscopy, as well as N-ls ESCA data53, 54). From our point of view, however, the most important applications of effective polarizability are to be found in correlating chemical reactivity data. Thus, the proton affinity (PA) of 49 unsubstituted alkylamines comprising primary, secondary and tertiary amines of a variety of skeletal types correlate directly with effective polarizability values (Fig. 22). 

EROS is not able to do this. In fact, it falls down in its inability to extract its own rules from input organic reactivity data sets. It is this information to which organic chemists have applied their intelligence and experience, and then, in the case of our research group, built into EROS. Thus, in the sense which we believe was intended when the term artificial intelligence was coined, EROS is not yet an example of AI. 

Quantitative structure-chemical reactivity relationships (QSRR). Chemical reactivities involve the formation and/or cleavage of chemical bonds. Examples of chemical reactivity data are equilibrium constants, rate constants, polarographic half wave potentials and oxidation-reduction potentials. 

The minimum value of /Jdf/v required for a reliable model depends on the quality of the determination of the data to be correlated. The smaller the experimental error in the data, the smaller the value of /Jdf/v required for dependable results. Experience indicates that in the case of chemical reactivity data /Jdf/v should be not less than 3. For bioactivity studies /Jdf/v depends heavily on the type of data for rate and equilibrium constants obtained from enzyme kinetics a value of not less than 3 is reasonable while for toxicity studies on mammals at least 7 is required. 

Sources of Reactivity Data Several important sources of reactivity data are described in the following paragraphs. 

---