Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Detection with a solid

More modern systems (diffractometers) follow the same principles but the diffracted X-rays are detected with a solid state detector, as described earlier. Typically, the X-ray source is static and the sample and detector are rotated, with the detector moving at twice the angular velocity of the sample to maintain the equivalent angle. Such instruments typically make use of relatively large samples compressed into the window of a 35 mm sample holder. However, where the sample size is restricted, as is common with archaeological applications, a smaller sample (a few mg) can be attached to a silica wafer. In all cases the sample needs to be hnely ground to ensure a uniform diffracted beam. [Pg.115]

FIGURE 21-13 Rutherford backscattering apparatus. An ion beam from an accelerator is focused on the sample. Backscattered ions are detected with a solid-state particle detector. [Pg.836]

Por IR-Raman experiments, a mid-IR pump pulse from an OPA and a visible Raman probe pulse are used. The Raman probe is generated either by frequency doubling a solid-state laser which pumps the OPA [16], or by a two-colour OPA [39]. Transient anti-Stokes emission is detected with a monocliromator and photomultiplier [39], or a spectrograph and optical multichannel analyser [40]. [Pg.3039]

Where three CTs for unrestricted or four CTs for restricted ground fault or combined O/C and G/F protections are employed in the protective circuit, the VA burden of the relay is shared by all the CTs in parallel and a normal VA CT may generally suffice. Such is the case in most of the protective schemes discussed in Sections 21.6 and 15.6.6(1), except for those employing only one CT to detect a ground fault condition, such as for a generator protection with a solidly grounded neutral (Figure 21.12). [Pg.474]

S. Lacorte, J. J. Vreuls, J. S. Salau, R Ventura and D. Barcelo, Monitoring of pesticides in river water using fully automated on-line solid-phase extraction and liquid cliro-matography with diode array detection with a novel filrtation device , J. Chromatogr. 795 71-82(1998). [Pg.374]

The dosimeter can detect various polynuclear aromatics at the pph level after 1 hour of exposure. It has been shown that the RTF of aza-arenes can he enhanced by using mercury(II) chloride as a heavy atom (21). Also, sensitized fluorescence spectrometry with a solid organic substrate can be used to detect trace amounts of polynuclear aromatic compounds (22). [Pg.157]

By CH4-chemical ionization two predominant ions from DDS were formed in the ion source m/z 163 (M + 1) and m/z 165 (M + 3), which were accelerated and separated in the first quadrupole. Decomposition by collision activation with argon then occurred in the second quadrupole and the resulting daughter ions were separated in the third quadrupole to give rise to collision-induced spectra (equations 41-43). When carrying out the analysis with a solid inlet MS-MS system (TSQ) it was observed that, when operating TSQ in the multiple ion detection mode and selecting the ions m/z 63, 83, 85,99 and 101, only in the third quadrupole was there no interference from other m/z 163 and 165 precursor ions . ... [Pg.156]

During production and characterization of various internal animal tissue reference materials for a number of metals, a comparative study was performed for Pb in six bovine teeth and two bovine bone materials using calibration with a solid RM and two versions of wet chemical analysis with GF-AAS and electrochemical (DPASV) detection. There was good agreement in the range of approx. 1.3-3 tng/kg dry weight for all techniques used (Liicker et al. 1992). [Pg.141]

Rao et al. [140] described a study using a commercial pH sensitive radio-telemetry capsule (RTC) to evaluate small bowel and colonic transit time in athletes with gastrointestinal symptoms. The RTC (type 7006 Remote Control Systems, London, UK) consists of a glass electrode with an integral reference cap and battery. RF transmissions from the capsule are detected by a solid-state receiver worn on the belt of the patient. The recorder samples the pH from the capsule at 6 second intervals for a period of 24 hours. They used pH changes as an indication of the pH capsule s movement. A sharp rise in pH from around pH 2 to pH 6 indicates that the capsule has moved into the duodenum from the stomach. Then the pH progressively rises to a plateau around pH 8, which indicates that the capsule has moved into the terminal ileum. Another commercially available wireless pH sensor (Bravo) from Medtronic Inc. has been used to measure esophageal pH for a period of 48 hours and it will be discussed later. [Pg.310]

The molecular structure of the parent compound was investigated in the vapor and in the solid phase using X-ray, XN and GED methods. The reported data are shown in Table 16. In both phases a clear bond length separation could be detected with a localized three-membered ring and its three adjacent double bonds. The symmetry-equivalent cyclopropane bonds are rather long in C3v-symmetric BUL (1.533-1.542 A), which can be explained by the common electron-withdrawing effect of the 7r-systems in a. svM-ciinal conformation. For comparison, the unaffected bonds in unsubstituted cyclopropane are 1.499 A in the crystal and 1.510 A in the gas phase. Therefore, the bond lengths in BUL... [Pg.48]

Endocrine disruptors are nowadays considered among the most important emerging pollutants in wastewater, but they are not actually monitored on-line. A recent study [48] described the implementation of a broad-spectrum analytical scheme for the screening of more than 200 compounds (endocrine disruptors, pharmaceutical compounds,...) in urban wastewater. For other specific organic compounds, a study concerning the improvement of immunoassays with a solid-phase extraction (SPE) membrane was reported for the on-site detection in soils and water of energetic materials (i.e. explosives) [49], but unfortunately it was not really tested for wastewater. [Pg.262]

Photoelectron spectroscopy involves detection and analysis of the photoelectrons produced by interaction of radiation with a solid. This radiation may be X-rays (for X-ray photoelectron spectroscopy, XPS or ESCA) or ultraviolet radiation (UPS) it causes the removal of a single core or valence electron, respectively. The kinetic energy, Ek, of these electrons is given by the following equation ... [Pg.169]


See other pages where Detection with a solid is mentioned: [Pg.36]    [Pg.83]    [Pg.337]    [Pg.180]    [Pg.36]    [Pg.83]    [Pg.337]    [Pg.180]    [Pg.2486]    [Pg.263]    [Pg.144]    [Pg.156]    [Pg.12]    [Pg.1192]    [Pg.476]    [Pg.396]    [Pg.363]    [Pg.96]    [Pg.259]    [Pg.353]    [Pg.302]    [Pg.136]    [Pg.292]    [Pg.207]    [Pg.103]    [Pg.14]    [Pg.1116]    [Pg.212]    [Pg.11]    [Pg.218]    [Pg.170]    [Pg.202]    [Pg.12]    [Pg.10]    [Pg.114]    [Pg.85]    [Pg.547]    [Pg.428]    [Pg.174]    [Pg.175]    [Pg.260]    [Pg.446]   


SEARCH



© 2024 chempedia.info