Critical variables

A number of properties can be computed from various chemical descriptors. These include physical properties, such as surface area, volume, molecular weight, ovality, and moments of inertia. Chemical properties available include boiling point, melting point, critical variables, Henry s law constant, heat capacity, log P, refractivity, and solubility. 

Fibers spun by this method may be isotropic or asymmetric, with dense or porous walls, depending on the dope composition. An isotropic porous membrane results from spinning solutions at the point of incipient gelation. The dope mixture comprises a polymer, a solvent, and a nonsolvent, which are spun into an evaporative column. Because of the rapid evaporation of the solvent component, the spinning dope solidifies almost immediately upon emergence from the spinneret in contact with the gas phase. The amount of time between the solution s exit from the spinneret and its entrance into the coagulation bath has been found to be a critical variable. Asymmetric fibers result from an inherently more compatible solvent/nonsolvent composition, ie, a composition containing lower nonsolvent concentrations. The nature of the exterior skin (dense or porous) of the fiber is also controlled by the dope composition. 

Time is a critical variable because the magnetite settles if the mixture is held too long in a static condition. Use of hydrocyclones makes possible the separation in a fraction of a minute (21). These devices impart centrifugal force to the system, thereby permitting a separation to be made at a specific gravity less than that required in static, heavy-Hquid separations. 

Volumetric heat generation increases with temperature as a single or multiple S-shaped curves, whereas surface heat removal increases linearly. The shapes of these heat-generation curves and the slopes of the heat-removal lines depend on reaction kinetics, activation energies, reactant concentrations, flow rates, and the initial temperatures of reactants and coolants (70). The intersections of the heat-generation curves and heat-removal lines represent possible steady-state operations called stationary states (Fig. 15). Multiple stationary states are possible. Control is introduced to estabHsh the desired steady-state operation, produce products at targeted rates, and provide safe start-up and shutdown. Control methods can affect overall performance by their way of adjusting temperature and concentration variations and upsets, and by the closeness to which critical variables are operated near their limits. 

The high degree of sensitivity, selectivity, and efficiency of gas chromatography allows the elucidation of a complete profile of the volatile components of distilled spirits. The wide selection of chromatographic columns and techniques, such as gc-ms, gc-ftir, and gc-ms-ftir, has allowed the chemist to routinely identify and quantify individual constituents on a parts-per-biUion level. The two most critical variables in the analysis of volatile components of distilled spirits by gas chromatography are the selection of a suitable chromatographic column and of the most appropriate detector. 

The basic correlation for packed tubes is derived from those of empty tubes by properly reinterpreting some critical variables. The most important change is in the characteristic distance that is changed from the tube diameter to the particle diameter. Other corrections are also used. The transfer correlations are based on dimensional analysis, expressed as either the Nusselt-type (1930) or the Colbum-type (1933) equations. For empty tubes at high Re numbers ... 

Inert gas pressure, temperature, and conversion were selected as these are the critical variables that disclose the nature of the basic rate controlling process. The effect of temperature gives an estimate for the energy of activation. For a catalytic process, this is expected to be about 90 to 100 kJ/mol or 20-25 kcal/mol. It is higher for higher temperature processes, so a better estimate is that of the Arrhenius number, y = E/RT which is about 20. If it is more, a homogeneous reaction can interfere. If it is significantly less, pore diffusion can interact. 

PSA peel testing is sensitive to a variety of factors and careful testing is necessary to get reproducible results. Critical variables include the following ... 

Since the mental model elicited by IMAS explicitly identifies the information needed to identify the causes of disturbances (and to distinguish among alternative causes), it can be used to specify the critical variables that need to be readily available to the process controller at the interface. This information can be used as an input to the design and upgrading of interfaces, particularly when new technology is being installed. 

A fairly new development in cracking liquid feeds that improves ethylene yield is the Millisecond furnace, which operates between 0.03-0.1 sec with an outlet temperature range of 870-925°C. The Millisecond furnace probably represents the last step that can be taken with respect to this critical variable because contact times below the. 01 sec range lead to production of acetylenes in large quantities. 

Where, for example, chloride stress-corrosion cracking is a risk the process temperature becomes a critical variable. Thus it may be more economic to lower the process temperature to below 70°C, a practical threshold for chloride stress-corrosion cracking, than to incur the extra expense of using stress-corrosion cracking-resistant materials of construction. 

The propriety of using the moisture content of the whole food substance as the critical variable is, however, open to question because the moisture within a given food is not distributed uniformly. The total moisture content is a sum of the moisture contents of the various components, such as starch, pectin, protein, sugar, and cellulose. 

Effects In Humans. Neither postmortem nor functional cerebrospinal fluid (CSF) studies in humans provide firm evidence for similar, long-term damages or alterations to monoaminergic neurons in chronic stimulant abusers. In part, the lack of demonstrable neurochemical changes may well be due to the obvious preclusion of well-controlled prospective experimentation in humans, as well as to variability in critical variables (e.g., individual sensitivity or pattern of abuse) encountered in clinical research. Possible relationship of the various complications of stimulant abuse including hyperpyrexia, seizure, anoxia, and metabolic exhaustion to neuronal chromatolysis, terminal destruction, and monoamine and enzymatic depletion have not been systematically explored in human autopsy eases. It should be also noted that, under nonperturbed conditions, overt behavioral deficits are rare in... 

Stability is a critical variable that must be considered as part of method development. When considering stability within the method, reviewing the available stability data for the analyte is very helpful. Information on the stability of the analyte in aqueous... 

In order to reduce unnecessary data queries, the statistics group should be consulted early in the clinical database development process to identify variables critical for data analysis. Optimally, the statistical analysis plan would already be written by the time of database development so that the queries could be designed based on the critical variables indicated in the analysis plan. However, at the database development stage, usually only the clinical protocol exists to guide the statistics and clinical data management departments in developing the query or data management plan. 

Categorical Data and Why Zero and Missing Results Differ Greatly 102 Performing Many-to-Many Comparisons/Joins 106 Using Medical Dictionaries 108 Other Tricks and Traps in Data Manipulation 112 Common Analysis Data Sets 118 Critical Variables Data Set 118 Change-from-Baseline Data Set 118 Time-to-Event Data Set 121... 

In this section we take the aforementioned principles and guidelines for analysis data sets and apply them to creating the most common analysis data sets. The critical variables, change-from-baseline, and time-to-event data sets are presented. Although these are the most common analysis data sets that a statistical programmer will encounter, they are by no means all of the possible analysis data sets. When it comes to analysis data sets, there is no limit to the diversity of data that you may have to create. 

Unfortunately, it is often hard to know a critical variables data set when you see it. It may be named pop, critvar, essential, patients, demog, or even dm, so it can be a bit hard to find. When creating this critical variables data set, you should try to create a good descriptive name for it. 

H. Systematic Formulation Development and Analysis of Critical Variables... 

Three-phase slurry reactors are commonly used in fine-chemical industries for the catalytic hydrogenation of organic substrates to a variety of products and intermediates (1-2). The most common types of catalysts are precious metals such as Pt and Pd supported on powdered carbon supports (3). The behavior of the gas-liquid-sluny reactors is affected by a complex interplay of multiple variables including the temperature, pressure, stirring rates, feed composition, etc. (1-2,4). Often these types of reactors are operated away from the optimal conditions due to the difficulty in identifying and optimizing the critical variables involved in the process. This not only leads to lost productivity but also increases the cost of down stream processing (purification), and pollution control (undesired by-products). 

The structure in palindrome or in direct repetition and the size of the spacing sequence between the two pentamers are the critical variables in establishing the specificity of response to each one of the receptors that share the same pentamer. For example, the elements of estrogen and thyroid response can share the same palindrome and be differentiated only by the number of nucleotide spacers three for the first one, none for the second. 

Operation data collection for a number of critical variables... 

The structures of the dimethylsiloxane block copolymers and respective parent homopolymers prepared for use as positive, bilevel resist materials are shown in Figure 1. Most copolymers were synthesized with >10 wt % silicon. The selection of PDMSX block length and novolac chemical composition proved to be the two most critical variables in achieving adequate resolution. 

Evidence from the tobacco industry documents, from research studies that measure free-base directly in tobacco smoke particulate, and from examination of smokeless tobacco products, all show that the level of free-base nicotine as delivered to the tobacco user is a critical variable in the acceptance of tobacco products and their continued use. The physiological impact of the rapid delivery of nicotine in the free-base form is a critical determinant of continued nicotine-seeking behavior, with the unintended consequences of exposure to the other toxic components of tobacco smoke and smokeless tobacco. Evaluating total delivered nicotine alone is not sufficient to characterize product differences. To fully understand the influence nicotine has on the allure of these products, both total and free-nicotine levels must be measured. A comprehensive understanding of nicotine delivery is needed to help find effective means for breaking its addictive nature and, ultimately, in reducing the morbidity and mortality associated with tobacco use. The levels of free-base nicotine must be included as part of any effort to achieve a better understanding of how tobacco products themselves influence their continued use. 

Another critical variable in liquid phase adsorptive separation is the operating temperature. Liquid phase adsorption must be operated at a temperature that... 

---