Counterion sodium

A somewhat different water, decane, and AOT microemulsion system has been studied by Feldman and coworkers [25] where temperature was used as the field variable in driving microstructural transitions. This system had a composition (volume percent) of 21.30% water, 61.15% decane, and 17.55% AOT. Counterions (sodium ions) were assigned as the dominant charge transport carriers below and above the percolation threshold in electrical... 

The influence of the charge peirameter and of the distribution pattern of carboxyl groups on the interaction polyanion-counterion (sodium or calcium) were studied by the determination of calcium and sodium activity coefficients which were compared to theoretical values. 

One can conceive that an anionic surfactant like sodium-di-2-ethylhexyl-sulfosuccinate (NaAOT) or sodium dodecyl sulfate (SDS) can be called so in working terms when the positively charged counterion, sodium, gets detached from the molecule and is released into the solvent in which the surfactant is dissolved. The same is true for the surfactant cetyltrimethylammonium bromide (CTAB) in which case the negatively charged bromide ion should be detached from the molecule so that the latter can become cationic . 

As noted from the frequencies quoted above, the counterion, sodium or zinc, is correlated to the position of COO stretching frequency. The degree of neutralization of the carboxylic acid is determined from the peak intensity at 1698 cm obtained from the sample, compared to the intensity of the same peak following treatment of the polymer with hydrochloric acid (to convert the salt form to the acid form), from the following equation ... 

The large sulfur atom is a preferred reaction site in synthetic intermediates to introduce chirality into a carbon compound. Thermal equilibrations of chiral sulfoxides are slow, and parbanions with lithium or sodium as counterions on a chiral carbon atom adjacent to a sulfoxide group maintain their chirality. The benzylic proton of chiral sulfoxides is removed stereoselectively by strong bases. The largest groups prefer the anti conformation, e.g. phenyl and oxygen in the first example, phenyl and rert-butyl in the second. Deprotonation occurs at the methylene group on the least hindered site adjacent to the unshared electron pair of the sulfur atom (R.R. Fraser, 1972 F. Montanari, 1975). 

The ketone is added to a large excess of a strong base at low temperature, usually LDA in THF at -78 °C. The more acidic and less sterically hindered proton is removed in a kineti-cally controlled reaction. The equilibrium with a thermodynamically more stable enolate (generally the one which is more stabilized by substituents) is only reached very slowly (H.O. House, 1977), and the kinetic enolates may be trapped and isolated as silyl enol ethers (J.K. Rasmussen, 1977 H.O. House, 1969). If, on the other hand, a weak acid is added to the solution, e.g. an excess of the non-ionized ketone or a non-nucleophilic alcohol such as cert-butanol, then the tautomeric enolate is preferentially formed (stabilized mostly by hyperconjugation effects). The rate of approach to equilibrium is particularly slow with lithium as the counterion and much faster with potassium or sodium. 

Precipitate formation can occur upon contact of iajection water ions and counterions ia formation fluids. Soflds initially preseat ia the iajectioa fluid, bacterial corrosioa products, and corrosion products from metal surfaces ia the iajectioa system can all reduce near-weUbore permeability. Injectivity may also be reduced by bacterial slime that can grow on polymer deposits left ia the wellbore and adjacent rock. Strong oxidising agents such as hydrogen peroxide, sodium perborate, and occasionally sodium hypochlorite can be used to remove these bacterial deposits (16—18). 

Sugar analysis by hplc has advanced greatly as a result of the development of columns specifically designed for carbohydrate separation. These columns fall into several categories. (/) Aminopropyl-bonded siHca used in reverse-phase mode with acetonitrile—water as the eluent. (2) Ion-moderated cation-exchange resins using water as the eluent. Efficiency of these columns is enhanced at elevated temperature, ca 80—90°C. Calcium is the usual counterion for carbohydrate analysis, but lead, silver, hydrogen, sodium, and potassium are used to confer specific selectivities for mono-, di-, and... 

Of the cations (counterions) associated with polar groups, sodium and potassium impart water solubiUty, whereas calcium, barium, and magnesium promote oil solubiUty. Ammonium and substituted ammonium ions provide both water and oil solubiUty. Triethanolammonium is a commercially important example. Salts (anionic surfactants) of these ions ate often used in emulsification. Higher ionic strength of the medium depresses surfactant solubihty. To compensate for the loss of solubiUty, shorter hydrophobes ate used for appHcation in high ionic-strength media. The U.S. shipment of anionic surfactants in 1993 amounted to 49% of total surfactant production. 

Back-diffusion is the transport of co-ions, and an equivalent number of counterions, under the influence of the concentration gradients developed between enriched and depleted compartments during ED. Such back-diffusion counteracts the electrical transport of ions and hence causes a decrease in process efficiency. Back-diffusion depends on the concentration difference across the membrane and the selectivity of the membrane the greater the concentration difference and the lower the selectivity, the greater the back-diffusion. Designers of ED apparatus, therefore, try to minimize concentration differences across membranes and utilize highly selective membranes. Back-diffusion between sodium chloride solutions of zero and one normal is generally [Pg.173]

In the polar pores, the diffusion coefficient of all ions is strongly reduced relative to the bulk values. No counterion dependence is observed for the SDC of CP. A more detailed analysis shows that the ion SDC depends on the ion s relative position in the pore [174]. In the case of the K ion, this dependence is particularly strong. K ions forming contact pairs with the surface charges are almost completely immobilized on the time scale of the simulations. The few remaining ions in the center of the pore are almost unaffected by the (screened) surface charges. The fact that most of the K ions form contact pairs substantially reduces the average value of the normalized K SDC to 0.2. The behavior of CP is similar to that of K. The SDC of sodium ions, which... 

Compare atomic charges for sodium borohydride and lithium aluminum hydride. Which ion contains the most electron-rich hydride The least electron-rich hydride Based on these results alone, which hydride reagent should be the better reducing agent Explain. Obtain atomic charges for free borohydride and aluminum hydride anions. What changes, if any, does the counterion produce ... 

Polk et al. reported27 that PET fibers could be hydrolyzed with 5% aqueous sodium hydroxide at 80°C in the presence of trioctylmethylammonium bromide in 60 min to obtain terephthalic acid in 93% yield. The results of catalytic depolymerization of PET without agitation are listed in Table 10.1. The results of catalytic depolymerization of PET with agitation are listed in Table 10.2. As expected, agitation shortened the time required for 100% conversion. Results (Table 10.1) for the quaternary salts with a halide counterion were promising. Phenyltrimethylammonium chloride (PTMAC) was chosen to ascertain whether steric effects would hinder catalytic activity. Bulky alkyl groups of the quaternary ammonium compounds were expected to hinder close approach of the catalyst to the somewhat hidden carbonyl groups of the fiber structure. The results indicate that steric hindrance is not a problem for PET hydrolysis under this set of conditions since the depolymerization results were substantially lower for PTMAC than for die more sterically hindered quaternary salts. 

Figure 20 shows the plot of the surface tension vs. the logarithm of the concentration (or-lg c-isotherms) of sodium alkanesulfonates C,0-C15 at 45°C. In accordance with the general behavior of surfactants, the interfacial activity increases with growing chain length. The critical micelle concentration (cM) is shifted to lower concentration values. The typical surface tension at cM is between 38 and 33 mN/m. The ammonium alkanesulfonates show similar behavior, though their solubility is much better. The impact of the counterions is twofold First, a more polarizable counterion lowers the cM value (Fig. 21), while the aggregation number of the micelles rises. Second, polarizable and hydrophobic counterions, such as n-propyl- or isopropylammonium and n-butylammonium ions, enhance the interfacial activity as well (Fig. 22). Hydrophilic counterions such as 2-hydroxyethylammonium have the opposite effect. Table 14 summarizes some data for the dodecane 1-sulfonates.

In an electrochemical study of the behavior of the counterions in the mixed cation systems sodium and silver, sodium and calcium, and silver and calcium containing the dodecyl sulfate anion, Corkill and Goodman [102] determined the CMC of sodium, calcium, and silver dodecyl sulfates in water and in solutions of sodium and silver nitrate. 

Shedlovsky et al. studied mixtures of sodium decyl, dodecyl, and tetradecyl sulfates by electromotive force measurements and determined the extent of the dissociation of the sodium counterions by the micelles. From the data obtained strong interaction below the CMC was found for all of the mixtures except those containing more than 25 mol % of sodium decyl sulfate [122]. Commercial alcohol sulfates are mixtures of homologs with different hydrocarbon chains. It has been demonstrated [123] that the CMC of such products is lower than that expected by calculation from the linear relationship between log CMC and the number of carbon atoms of the alcohol as stated in Eq. (11). These results are shown in Fig. 9. 

Mechanisms of micellar reactions have been studied by a kinetic study of the state of the proton at the surface of dodecyl sulfate micelles [191]. Surface diffusion constants of Ni(II) on a sodium dodecyl sulfate micelle were studied by electron spin resonance (ESR). The lateral diffusion constant of Ni(II) was found to be three orders of magnitude less than that in ordinary aqueous solutions [192]. Migration and self-diffusion coefficients of divalent counterions in micellar solutions containing monovalent counterions were studied for solutions of Be2+ in lithium dodecyl sulfate and for solutions of Ca2+ in sodium dodecyl sulfate [193]. The structural disposition of the porphyrin complex and the conformation of the surfactant molecules inside the micellar cavity was studied by NMR on aqueous sodium dodecyl sulfate micelles [194]. 

Fujiwara et al. used the CMC values of sodium and calcium salts to calculate the energetic parameters of the micellization [61]. The cohesive energy change in micelle formation of the a-sulfonated fatty acid methyl esters, calculated from the dependency of the CMC on the numbers of C atoms, is equivalent to that of typical ionic surfactants (Na ester sulfonates, 1.1 kT Ca ester sulfonates, 0.93 kT Na dodecyl sulfate, 1.1 kT). The degree of dissociation for the counterions bound to the micelle can be calculated from the dependency of the CMC on the concentration of the counterions. The values of the ester sulfonates are also in the same range as for other typical ionic surfactants (Na ester sulfonates, 0.61 Ca ester sulfonates, 0.70 Na dodecyl sulfate, 0.66). 

The Krafft point, i.e., the aqueous solubility, also depends greatly on the type of counterion [30,60,61]. For example, potassium salts have higher Krafft points than sodium or ammonium salts. Bivalent cations, like calcium and magnesium, raise the Krafft point. The rise is smaller for ester sulfonates than for alkyl sulfates [61]. 

Typical initiators for living anionic polymerization of siloxanes include conventional organoalkali compounds and lithium siloxanolates22). Initiators containing lithium counterions are preferable to sodium or potassium counterions due to the lower catalytic activity of lithium in siloxane redistribution reactions. Living anionic polymeriza-... 

Foreign cations can increasingly lower the yield in the order Fe, Co " < Ca " < Mn < Pb " [22]. This is possibly due to the formation of oxide layers at the anode [42], Alkali and alkaline earth metal ions, alkylammonium ions and also zinc or nickel cations do not effect the Kolbe reaction [40] and are therefore the counterions of choice in preparative applications. Methanol is the best suited solvent for Kolbe electrolysis [7, 43]. Its oxidation is extensively inhibited by the formation of the carboxylate layer. The following electrolytes with methanol as solvent have been used MeOH-sodium carboxylate [44], MeOH—MeONa [45, 46], MeOH—NaOH [47], MeOH—EtsN-pyridine [48]. The yield of the Kolbe dimer decreases in media that contain more than 4% water. 

---