Resins chemical properties

Polymer Properties and Lithographic Performance in Chemically Amplified Resins. 

Chemical Properties. A combination of excellent chemical and mechanical properties at elevated temperatures result in high performance service in the chemical processing industry. Teflon PEA resins have been exposed to a variety of organic and inorganic compounds commonly encountered in chemical service (26). They are not attacked by inorganic acids, bases, halogens, metal salt solutions, organic acids, and anhydrides. Aromatic and ahphatic hydrocarbons, alcohols, aldehydes, ketones, ethers, amines, esters, chlorinated compounds, and other polymer solvents have Httle effect. However, like other perfluorinated polymers,they react with alkah metals and elemental fluorine. 

Ton-exchange resins are used repeatedly in a cyclic manner over many years, and deterioration of both physical and chemical properties can be anticipated. Comparison of the properties of used resin with those of new resin is helpfiil to learning more about the nature and cause of deterioration (12). Corrective action frequendy extends the life of the resin. Comparison of properties must always be made with the resin in the same ionic form. 

Chemical Properties and Reactivity. LLDPE is a saturated branched hydrocarbon. The most reactive parts of LLDPE molecules are the tertiary CH bonds in branches and the double bonds at chain ends. Although LLDPE is nonreactive with both inorganic and organic acids, it can form sulfo-compounds in concentrated solutions of H2SO4 (>70%) at elevated temperatures and can also be nitrated with concentrated HNO. LLDPE is also stable in alkaline and salt solutions. At room temperature, LLDPE resins are not soluble in any known solvent (except for those fractions with the highest branching contents) at temperatures above 80—100°C, however, the resins can be dissolved in various aromatic, aUphatic, and halogenated hydrocarbons such as xylenes, tetralin, decalin, and chlorobenzenes. 

Fibers. The principal type of phenoHc fiber is the novoloid fiber (98). The term novoloid designates a content of at least 85 wt % of a cross-linked novolak. Novoloid fibers are sold under the trademark Kynol, and Nippon Kynol and American Kynol are exclusive Hcensees. Novoloid fibers are made by acid-cataly2ed cross-linking of melt-spun novolak resin to form a fuUy cross-linked amorphous network. The fibers are infusible and insoluble, and possess physical and chemical properties that distinguish them from other fibers. AppHcations include a variety of flame- and chemical-resistant textiles and papers as weU as composites, gaskets, and friction materials. In addition, they are precursors for carbon fibers. 

Color Concentrates. Color concentrates have become the method of choice to incorporate colorants into resins. Color concentrates have high ratios of colorant to a compatible vehicle. The colorant may be added at 70% colorant to 30% vehicle in a titanium dioxide mixture whereas the ratio may be 15% colorant to 85% vehicle in a carbon black mixture. The amount of colorant that can be added is dependent on the surface area and the oil absorption of the colorant and the wetting abiHty of the vehicle. The normal goal is to get as much colorant in the concentrate as possible to obtain the greatest money value for the product. Furthermore, less added vehicle minimizes the effect on the physical or chemical properties of the resin system. 

Mechanical and Chemical Properties. Colorants, especially pigments, can affect the tensile, compressive, elongation, stress, and impact properties of a polymer (5). The colorants can act as an interstitial medium and cause microcracks to form in the polymer colorant matrix. This then leads to degradation of the physical properties of the system. Certain chemicals can attack colorants and there can be a loss of physical properties as well as a loss of the chromatic attributes of the colorant. Colorants should always be evaluated in the resin in which they will be used to check for loss of properties that ate needed for the particular appHcations. 

Random copolymers of vinyl chloride and other monomers are important commercially. Most of these materials are produced by suspension or emulsion polymerization using free-radical initiators. Important producers for vinyl chloride—vinyUdene chloride copolymers include Borden, Inc. and Dow. These copolymers are used in specialized coatings appHcations because of their enhanced solubiUty and as extender resins in plastisols where rapid fusion is required (72). Another important class of materials are the vinyl chloride—vinyl acetate copolymers. Principal producers include Borden Chemicals Plastics, B. F. Goodrich Chemical, and Union Carbide. The copolymerization of vinyl chloride with vinyl acetate yields a material with improved processabihty compared with vinyl chloride homopolymer. However, the physical and chemical properties of the copolymers are different from those of the homopolymer PVC. Generally, as the vinyl acetate content increases, the resin solubiUty in ketone and ester solvents and its susceptibiUty to chemical attack increase, the resin viscosity and heat distortion temperature decrease, and the tensile strength and flexibiUty increase slightly. 

As noted earlier, ion-exchange materials are grouped into four specific classifications depending on the functional group attached strong-acid cation, strong-base anion, weak-acid cation, or weak-base anion.. In addition to these, we also have inert resins that do not have chemical properties. 

The rest of this section will be devoted to the chemically convertible resins. The variety of chemical types exploited in these resins are legion, so only the most widely used will be mentioned here. In some cases a single resin may be employed to produce a coating, but generally blends are used so enabling the film properties to be controlled by ratios of components as well as by choice of the components themselves. 

The highest mechanical strengths are usually obtained when the fibre is used in fine fabric form but for many purposes the fibres may be used in mat form, particularly glass fibre. The chemical properties of the laminates are largely determined by the nature of the polymer but capillary attraction along the fibre-resin interface can occur when some of these interfaces are exposed at a laminate surface. In such circumstances the resistance of both reinforcement and matrix must be considered when assessing the suitability of a laminate for use in chemical plant. Glass fibres are most commonly used for chemical plant, in conjunction with phenolic resins, and the latter with furane, epoxide and, sometimes, polyester resins. 

The final structure of resins produced depends on the reaction condition. Formaldehyde to phenol (F/P) and hydroxyl to phenol (OH/P) molar ratios as well as ruction temperahne were the most important parameters in synthesis of resols. In this study, the effect of F/P and OH/P wt%, and reaction temperature on the chemical structure (mono-, di- and trisubstitution of methyrol group, methylene bridge, phenolic hemiformals, etc.) was studied utilizing a two-level full factorial experimental design. The result obtained may be applied to control the physical and chemical properties of pre-polymer. 

Relatively small changes in comonomer content can result in significant changes in physical or chemical properties. Polymer resin manufacturers exploit such relationships to control the properties of their products. The composition of a copolymer controls properties such as stiffness, heat distortion temperature, printability, and solvent resistance. For example, polypropylene homopolymer is brittle at temperatures below approximately 0 °C however, when a few percent ethylene is incorporated into the polymer backbone, the embrittlement temperature of the resulting copolymer is reduced by 20 °C or more. 

Do assassin bugs really collect damar for its chemicals The resin serves their needs because it does not harden quickly but remains soft and sticky. Softness and stickiness are physical properties, but they are also direct consequences of the resin s chemical composition. It seems fair to credit the bugs employment of damar to its complex mix of chemicals. We could also ask whether green lacewing larvae appropriate aphid wool for its chemicals. In that case, the significance of chemical properties appears unequivocal, as the ants chemical sense evidently equates the waxy wool with aphids. 

Engineers like to design machines that take plastics and inject them into molds, extrude them into filament, sheets, rods, and film, or blow-mold them into shapes. They want these plastics to have a terrific balance of mechanical, electrical, and chemical properties. That s why they have attached their name to engineering resins, a set of plastics unlike thermosets that they can remelt and further process mechanically. Nylon, polycarbonates, and polyesters are the three most popular engineering resins. 

The lanthanide group of elements (Table 11.7) is very difficult to separate by traditional methods because of their similar chemical properties. The techniques originally used, like the precious metals, included laborious multiple fractional recrystallizations and fractional precipitation, both of which required many recycle streams to achieve reasonably pure products. Such techniques were unable to cope with the demands for significant quantities of certain pure compounds required by the electronics industry hence, other separation methods were developed. Resin ion exchange was the first of these... 

One of the most ubiquitous multiple-component contaminants that reaches the soil and deeper subsurface layers is crude oil and its refined products. In the subsurface, these contaminants are transformed differently by various mechanisms (Cozzarelli and Baber 2003). Crude oil contains a multitude of chemical components, each with different physical and chemical properties. As discussed in Chapter 4, the main groups of compounds in crude oils are saturated hydrocarbons (such as normal and branched alkanes and cycloalkanes without double bonds), aromatic hydrocarbons, resins, and asphaltenes, which are high-molecular-weight polycyclic compounds containing nitrogen, sulfur, and oxygen. 

The function of the resin matrix material in filament-wound structures is to help distribute the load, maintain proper fiber position, control composite mechanical and chemical properties, and provide interlaminar shear strength. Either a thermosetting or a thermoplastic resin material may be selected. Thermosetting resins may be selected for application in a wetwinding process or as part of a prepreg resin system. 

Tungsten-based catalysts with a Lewis base promoter are used in the polymerization of dicyclopentadiene also isolated from the C5 stream-cracker fraction.150,155 The product poly(dicyclopentadiene) or Metton resin has unusual physical and chemical properties. It is processed together with elastomers to increase viscosity of the end product by using reaction injection molding (RIM) technology.155... 

---