Conductive polymers, cathode material

The reversible redox properties of conducting polymers are suitable for application to rechargeable batteries. For lithium ion batteries, conducting polymers can be used as cathode materials. Conducting polymers are also effective for fuel cell application as protective layers on anodes. The excellent redox and electric properties of conducting polymers are promising candidates for capacitor application. 

Lee K, Ishihara A, Mitsushima S, Kamiya N, Ota KI. Transition metal carbides for new cathode material of polymer electrotyte fuel cell. Electrochemical Society Proceeding Volume 2004-21, Proton Conducting Membrane Fuel Cells IV, 2004 213-20. 

Conductive paints (resins) have recently been used for the cathodic protection of steel reinforcing bars in concrete, but they are always used in conjunction with a primary anode material, e.g. platinised-niobium or platinised-titanium wire or a conductive polymer rod. 

Conductive Polymers Anodes currently available consist of a conductive-polymer graphite material coated on to a multistrand copper conductor. The polymer provides an active surface but shields the conductor from chemical attack. A non-conductive outer braid may be used to give abrasion resistance and avoid direct contact with the cathode. The finished anode has the appearance of an electric cable and is claimed to have applications for buried/immersed structures and for internal protection of tanks, etc. Anode current densities are typically given as 14-30mAm ... 

In order to relax 1 mol of compacted polymeric segments, the material has to be subjected to an anodic potential (E) higher than the oxidation potential (E0) of the conducting polymer (the starting oxidation potential of the nonstoichiometric compound in the absence of any conformational control). Since the relaxation-nucleation processes (Fig. 37) are faster the higher the anodic limit of a potential step from the same cathodic potential limit, we assume that the energy involved in this relaxation is proportional to the anodic overpotential (rj)... 

The concept of electrochemical intercalation/insertion of guest ions into the host material is further used in connection with redox processes in electronically conductive polymers (polyacetylene, polypyrrole, etc., see below). The product of the electrochemical insertion reaction should also be an electrical conductor. The latter condition is sometimes by-passed, in systems where the non-conducting host material (e.g. fluorographite) is finely mixed with a conductive binder. All the mentioned host materials (graphite, oxides, sulphides, polymers, fluorographite) are studied as prospective cathodic materials for Li batteries. 

Conductive polymers have attracted increasing attention because they have wide applications. Recently, very stable poly(thiophenes) with polyfluorinated side chains have been electrochemically synthesized and characterized [81]. Furthermore, notably novel conductive materials have been prepared by cathodic electropolymerization of perfluoro cvclobutene and cyclopentene [82]. 

Although platinum is the metal of choice for PEM fuel cell cathodes, Paul Matter, Elizabeth Biddinger, and Umit Ozkan (Ohio State University) show that nonprecious metals will have to be developed for this type of fuel cell to become practical and widely used. Although few materials have the electrochemical properties needed to replace platinum, this review discusses candidates such as macrocycle compounds, non-marcrocyclic pyrolyzed carbons, conducting polymers, chalcogen-ides, and heteropolyacids. 

Polymers have served roles in PEM fuel cell cathodes such as modifiers to macrocycle-based electrodes to improve conductivity and stability,165 composite materials with heteropolyacids,166 and as precursors to pyrolyzed catalysts.38,112,132,133 However, as discussed in the previous section, the activity of nitrogen-containing carbon raises the possibility of non-metal electrodes functioning in a cathode environment. Likewise, researchers have noted ORR activity for various conducting polymers containing nitrogen, and recently studies on their potential use in PEM fuel cell cathodes have been reported. 

Synthetic lipids and peptides have been found to self-assemble into tubules [51,52]. Several groups have used these tubules as templates [17,51,53-56]. Much of this work has been the electroless deposition of metals [51,54]. Electrolessly plated Ni tubules were found to be effective field emission cathode sources [55]. Other materials templated in or on self-assembled lipid tubules include conducting polymer [56] and inorganic oxides [53]. Nanotubules from cellular cytoskeletons have also been used for electroless deposition of metals [57]. 

In addition to the criticisms from Anderman, a further challenge to the application of SPEs comes from their interfacial contact with the electrode materials, which presents a far more severe problem to the ion transport than the bulk ion conduction does. In liquid electrolytes, the electrodes are well wetted and soaked, so that the electrode/electrolyte interface is well extended into the porosity structure of the electrode hence, the ion path is little affected by the tortuosity of the electrode materials. However, the solid nature of the polymer would make it impossible to fill these voids with SPEs that would have been accessible to the liquid electrolytes, even if the polymer film is cast on the electrode surface from a solution. Hence, the actual area of the interface could be close to the geometric area of the electrode, that is, only a fraction of the actual surface area. The high interfacial impedance frequently encountered in the electrochemical characterization of SPEs should originate at least partially from this reduced surface contact between electrode and electrolyte. Since the porous structure is present in both electrodes in a lithium ion cell, the effect of interfacial impedances associated with SPEs would become more pronounced as compared with the case of lithium cells in which only the cathode material is porous. 

Further research on the substitution of the thiophene 3-position with phenyl groups containing electron-withdrawing or electron-donating groups (such as methyl, methoxy, fluoro, chloro, bromo, trifluoromethyl, sulfoxy) in the para position have lead to polymers with unique features [57]. The electron-withdraw-ing groups allow the formation of a radical anion and thus stabilize the n-doped state. As a result, such conducting polymers can be reversibly oxidized and reduced and electrochromic devices can be built with identical anode and cathode materials [58]. 

A solid-state solar cell was assembled with an ionic liquid—l-ethyl-3-methylimidazolium bis(trifluoromethanesulfone)amide (EMITFSA) containing 0.2 M lithium bis(trifluoromethanesulfone)amide and 0.2 M 4-tert-butylpyridine—as the electrolyte and Au or Pt sputtered film as the cathode.51,52 The in situ PEP of polypyrrole and PEDOT allows efficient hole transport between the ruthenium dye and the hole conducting polymer, which was facilitated by the improved electronic interaction of the HOMO of the ruthenium dye and the conduction band of the hole transport material. The best photovoltaic result ( 7p=0.62 %, 7SC=104 pA/cm2, FOC=0.716 V, and FF=0.78) was obtained from the ruthenium dye 5 with polypyrrole as the hole transport layer and the carbon-based counterelectrode under 10 mW/cm2 illumination. The use of carbon-based materials has improved the electric connectivity between the hole transport layer and the electrode.51... 

Conductive polymer material used for the positive temperature coefficient resistor (PTC) overcurrent protection device Activated carbon cathode and anode... 

The composite cathode usually consists of an inert conducting material, the polymer/salt electrolyte, and the solid active insertion particles. The key requirements for a material to be successfully used as a cathode in a rechargeable lithium battery are as follows ... 

K. Gurunathan, D.P. Amalnerkar, D.C. Trivedi, S3mthesis and characterization of conducting polymer composite (PAn/ Ti02) for cathode material in rechargeable battery . Materials Letters, 57, 1642-1648, (2003). 

Batteries This field is the first area where conducting polymers promise to have a big commercial impact. Batteries have several key components the electrodes allow for collection of current and transmission of power the cathode material becomes reduced when the anode material is oxidized and vice versa and the electrolyte provides a physical separation between the cathode and the anode, and provides a source of cations and anions to balance the redox reactions. Aside from picking the best conducting polymer available, there are many other issues, not related to conducting polymers, that affect battery performance, such as electrolyte stability and stability of the counter half-cell reaction (which is at least as important as the conducting-polymer electrode), and compatibility between the electrolyte and the materials. 

---