Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hole-transporting material

Photoconductive polymers are widely used in the imaging industry as either photosensitive receptors or carrier (electron or hole) transporting materials in copy machines and laser printers. This is still the only area in which the photoelectronic properties of polymers are exploited on a large-scale industrial basis. It is also one electronic appHcation where polymers are superior to inorganic semiconductors. [Pg.407]

TPD or TAD hole transport material) N,N -diphenyl-N,N -bf.v-(3-mcthylphenyl)-(1,1 )-biphenyl-4,4 -dianiiuc... [Pg.534]

The low efficiencies could be due to lack of intimate contact (interface) between the sensitizer (which is hydrophilic) and the spirobifluorene (which is hydrophobic). Moreover, the surface charge also plays a significant role in the regeneration of the dye by the electrolyte.98 In an effort to reduce the charge of the sensitizer and improve the interfacial properties between the surface-bound sensitizer and the spirobifluorene hole-carrier, amphiphilic heteroleptic ruthenium(II) complexes ((48)-(53)) have been used as sensitizers. These complexes show excellent stability and good interfacial properties with hole-transport materials, resulting in improved efficiencies for the solar cells. [Pg.749]

A better PLED performance was observed by Jenekhe and coworkers [173] for ITO/PEDOT/polymer/Al devices with quinoxaline-phenylene vinylene copolymers 586 and 587 as emitting layers. The el and maximum brightness were measured as 0.012 and 0.01%, and 120 and 35 cd/m2, respectively. The turn-on voltages of these devices were reasonably low, 6.0 and 4.0 V, respectively. The performance of PLEDs with polymer 586 was further improved by blending with 5wt% of a hole transport material, 1, l-Mstdi-d-tolylami-ii ophenyI )cycIohexane (TAPC) that enhanced the d lto 0.06% and the maximum brightness to 450 cd/m2. [Pg.236]

S. Liu, X. Jiang, H. Ma, M.S. Liu, and A.K.-Y. Jen, Triarylamine-containing poly(perfluorocy-clobutane) as hole-transporting materials for polymer light-emitting diodes, Macromolecules, 33 3514-3517, 2000. [Pg.277]

Once the electrons and holes have been injected, they migrate into ETL and HTL to form excited states referred to as polarons by physicists or radical ions by chemists. These polarons or radical ions move, by means of a so-called charge-hopping mechanism, through the electron and hole transport materials (ETMs and HTMs), which typically possess good charge mobility properties, and eventually into the EML. [Pg.301]

SCHEME 3.12 Chemical structures of some hole transport materials based on carbazole units. [Pg.315]

SCHEME 3.18 Composite hole transport material (c-HTM) CuPc (1) and a-NPD (13). [Pg.319]

J. Blochwitz, M. Pfeiffer, T. Fritz, and K. Leo, Low voltage organic light emitting diodes featuring doped phthalocyanine as hole transport material, Appl. Phys. Lett., 73 729-731 (1998). [Pg.397]

C. Adachi, K. Nagai, and N. Tamoto, Molecular design of hole transport materials for obtaining high durability in organic electroluminescent diodes, Appl. Phys. Lett., 66 2679-2681 (1995). [Pg.398]

D.F. O Brien, P.E. Burrows, S.R. Forrest, B.E. Koene, D.E. Loy, and M.E. Thompson, Hole transporting materials with high glass transition temperatures for use in organic light-emitting devices, Adv. Mater., 10 1108-1112 (1998). [Pg.398]

R.D. Hreha, C.P. George, A. Haldi, B. Domercq, M. Malagoli, S. Barlow, J. Bredas, B. Kippelen, and S.R. Marder, 2,7-fe(diarylamino)-9,9-dimethylfluorenes as hole-transport materials for organic light-emitting diodes, Adv. Func. Mater., 13 967-973 (2003). [Pg.398]

J.P. Chen, H. Tanabe, X. Li, T. Thoms, Y. Okamura, and K. Ueno, Novel organic hole transport material with very high Te for light-emitting diodes, Synth. Met., 132 173-176 (2003). [Pg.398]

S. Tokito, K. Noda, K. Shimada, S. Inoue, M. Kimura, Y. Sawaki, and Y. Taga, Influence of hole transporting material on device performance in organic light-emitting diode, Thin Solid... [Pg.399]

M.S. Bayerl, T. Braig, O. Nuyken, D.C. Muller, M. Gross, and K. Meerholz, Crosslinkable hole-transport materials for preparation of multilayer organic light emitting devices by spin-coating, ... [Pg.399]

A. Kimoto, J. Cho, M. Higuchi, and K. Yamamoto, Novel carbazole dendrimers having a metal coordination site as a unique hole-transport material, Macromolecular Symposia 209 (Organo-metallic and Coordination Clusters and Polymers) pp. 51-65 (2004). [Pg.400]


See other pages where Hole-transporting material is mentioned: [Pg.408]    [Pg.410]    [Pg.221]    [Pg.513]    [Pg.535]    [Pg.538]    [Pg.271]    [Pg.196]    [Pg.11]    [Pg.285]    [Pg.197]    [Pg.719]    [Pg.748]    [Pg.748]    [Pg.749]    [Pg.11]    [Pg.81]    [Pg.144]    [Pg.146]    [Pg.149]    [Pg.162]    [Pg.229]    [Pg.295]    [Pg.295]    [Pg.300]    [Pg.308]    [Pg.312]    [Pg.313]    [Pg.317]    [Pg.398]    [Pg.399]    [Pg.399]    [Pg.399]   
See also in sourсe #XX -- [ Pg.567 ]




SEARCH



Composite hole transport material

Hole transporter

Hole transporting

Hole-transport materials

Hole-transport materials, amination reactions

Hole-transporting materials OLED application

Hole-transporting materials advantage

Hole-transporting materials blocking layers

Hole-transporting materials cross-linkable

Material transport

Organic light-emitting diodes hole transport materials

Photorefractive hole transport materials

Photovoltaic device hole transporting material

Polymer hole-transporting materials

Polymer-based hole-transport materials

Small-molecule-based hole-transport materials

© 2024 chempedia.info