Subject aromatics

Fig (6)The transformation of the tetralone (42) to the ester (45) is described. Its tranformation to the tricyclic ketone (46) involves aromatization, subjection to Grignard reaction and intramolecular cyclisation and oxidation. Its conversion to diazomethylketone (48) is carried out in three steps and this on acid catalysed cyclisation yields the enedione (49), which is converted to methy ( )-methylpisiferate (5) by standard organic reactions. 

The quantification of the aromaticity encounters inherent inconsistencies and discrepancies caused by the nature of the measured parameters and/or by the aggregation state where the measurement was t en. Theoretical approximations also bring inconsistencies explicitly, as related to the definition of the nonaromatic model to be compared with the aromatic compound, and implicitly because of differences in the electronic structures of heteroatoms and carbon. These problems render the measurement, and indeed the definition, of quantitative measures of aromaticity subjective and contentious. We try in the present treatment to present an unbiased overview. 

Liquid chromatography is preceded by a precipitation of the asphaltenes, then the maltenes are subjected to chromatography. Although the separation between saturated hydrocarbons and aromatics presents very few problems, this is not the case with the separation between aromatics and resins. In fact, resins themselves are very aromatic and are distinguished more by their high heteroatom content (this justifies the terms, polar compounds or N, S, 0 compounds , also used to designate resins). 

The potential advantages of LPG concern essentially the environmental aspects. LPG s are simple mixtures of 3- and 4-carbon-atom hydrocarbons with few contaminants (very low sulfur content). LPG s contain no noxious additives such as lead and their exhaust emissions have little or no toxicity because aromatics are absent. This type of fuel also benefits often enough from a lower taxation. In spite of that, the use of LPG motor fuel remains static in France, if not on a slightly downward trend. There are several reasons for this situation little interest from automobile manufacturers, reluctance on the part of automobile customers, competition in the refining industry for other uses of and fractions, (alkylation, etherification, direct addition into the gasoline pool). However, in 1993 this subject seems to have received more interest (Hublin et al., 1993). 

The special case of pericyclic reactions is an appropriate means of introducing the subject These reactions are very common, and were extensively studied experimentally and theoretically. They also provide a direct and straightforward connection with aromaticity and antiaromaticity, concepts that mm out to be quite useful in analyzing phase changes in chemical reactions. 

When an aromatic compound having an aliphatic side chain is subjected to oxidation, fission of the side chain occurs between the first and second carbon atoms from the benzene ring, the first carbon atom thus becoming part of a carboxyl ( -COOH) group. For example ... 

Metallic sodium. This metal is employed for the drying of ethers and of saturated and aromatic hydrocarbons. The bulk of the water should first be removed from the liquid or solution by a preliminary drying with anhydrous calcium chloride or magnesium sulphate. Sodium is most effective in the form of fine wire, which is forced directly into the liquid by means of a sodium press (see under Ether, Section II,47,i) a large surface is thus presented to the liquid. It cannot be used for any compound with which it reacts or which is affected by alkalis or is easily subject to reduction (due to the hydrogen evolved during the dehydration), viz., alcohols, acids, esters, organic halides, ketones, aldehydes, and some amines. 

Nitration in sulphuric acid is a reaction for which the nature and concentrations of the electrophile, the nitronium ion, are well established. In these solutions compounds reacting one or two orders of magnitude faster than benzene do so at the rate of encounter of the aromatic molecules and the nitronium ion ( 2.5). If there were a connection between selectivity and reactivity in electrophilic aromatic substitutions, then electrophiles such as those operating in mercuration and Friedel-Crafts alkylation should be subject to control by encounter at a lower threshold of substrate reactivity than in nitration this does not appear to occur. 

More information has appeared concerning the nature of the side reactions, such as acetoxylation, which occur when certain methylated aromatic hydrocarbons are treated with mixtures prepared from nitric acid and acetic anhydride. Blackstock, Fischer, Richards, Vaughan and Wright have provided excellent evidence in support of a suggested ( 5.3.5) addition-elimination route towards 3,4-dimethylphenyl acetate in the reaction of o-xylene. Two intermediates were isolated, both of which gave rise to 3,4-dimethylphenyl acetate in aqueous acidic media and when subjected to vapour phase chromatography. One was positively identified, by ultraviolet, infra-red, n.m.r., and mass spectrometric studies, as the compound (l). The other was less stable and less well identified, but could be (ll). 

Enone formation-aromatization has been used for the synthesis of 7-hydro-xyalkavinone (716)[456]. The isotlavone 717 was prepared by the elimina-tion[457]. The unsaturated 5-keto allyl esters 718 and 719, obtained in two steps from myreene. were subjected to enone formation. The reaction can be carried out even at room temperature using dinitriles such as adiponitrile (720) or 1,6-dicyanohexane as a solvent and a weak ligand to give the pseudo-ionone isomers 721 and 722 without giving an allylated product(458]. 

Reduction of arenes by catalytic hydrogenation was described m Section 114 A dif ferent method using Group I metals as reducing agents which gives 1 4 cyclohexadiene derivatives will be presented m Section 1111 Electrophilic aromatic substitution is the most important reaction type exhibited by benzene and its derivatives and constitutes the entire subject matter of Chapter 12... 

Examples include luminescence from anthracene crystals subjected to alternating electric current (159), luminescence from electron recombination with the carbazole free radical produced by photolysis of potassium carba2ole in a fro2en glass matrix (160), reactions of free radicals with solvated electrons (155), and reduction of mtheiiium(III)tris(bipyridyl) with the hydrated electron (161). Other examples include the oxidation of aromatic radical anions with such oxidants as chlorine or ben2oyl peroxide (162,163), and the reduction of 9,10-dichloro-9,10-diphenyl-9,10-dihydroanthracene with the 9,10-diphenylanthracene radical anion (162,164). Many other examples of electron-transfer chemiluminescence have been reported (156,165). 

Analytical and Test Methods. o-Nitrotoluene can be analyzed for purity and isomer content by infrared spectroscopy with an accuracy of about 1%. -Nitrotoluene content can be estimated by the decomposition of the isomeric toluene diazonium chlorides because the ortho and meta isomers decompose more readily than the para isomer. A colorimetric method for determining the content of the various isomers is based on the color which forms when the mononitrotoluenes are dissolved in sulfuric acid (45). From the absorption of the sulfuric acid solution at 436 and 305 nm, the ortho and para isomer content can be deterrnined, and the meta isomer can be obtained by difference. However, this and other colorimetric methods are subject to possible interferences from other aromatic nitro compounds. A titrimetric method, based on the reduction of the nitro group with titanium(III) sulfate or chloride, can be used to determine mononitrotoluenes (32). Chromatographic methods, eg, gas chromatography or high pressure Hquid chromatography, are well suited for the deterrnination of mononitrotoluenes as well as its individual isomers. Freezing points are used commonly as indicators of purity of the various isomers. 

Like mthenium, amines coordinated to osmium in higher oxidation states such as Os(IV) ate readily deprotonated, as in [Os(en) (NHCH2CH2NH2)] [111614-75-6], This complex is subject to oxidative dehydrogenation to form an imine complex (105). An unusual Os(IV) hydride, [OsH2(en)2] [57345-94-5] has been isolated and characterized. The complexes of aromatic heterocycHc amines such as pyridine, bipytidine, phenanthroline, and terpyridine ate similar to those of mthenium. Examples include [Os(bipy )3 [23648-06-8], [Os(bipy)2acac] [47691-08-7],... 

Typically, the oil is subjected to several successive oleum contacts ("treats") at ca 60—65°C. This charge ratio of feedstock oleum is generally empirically determined, but depends in part on the degree of aromatic removal required for the product. In the case of white oil manufacture, 100 parts of... 

Sulfonic acids may be subjected to a variety of transformation conditions, as shown in Figure 2. Sulfonic acids can be used to produce sulfonic anhydrides by treatment with a dehydrating agent, such as thionyl chloride [7719-09-7J. This transformation is also accomphshed using phosphoms pentoxide [1314-56-3J. Sulfonic anhydrides, particulady aromatic sulfonic anhydrides, are often produced in situ during sulfonation with sulfur trioxide. Under dehydrating conditions, sulfonic acids react with substituted aromatic compounds to give sulfone derivatives. 

Introduced in 1972, the whoUy aromatic polyamide, poly i ra-phenylene teraphthalamide), termed aramid, was the subject of extensive evaluation as a tire cord in all types of tires (8,14). As of the late 1990s, however, only specialized appHcations have emerged for aramid tire cord that draw on their high strength-to-weight ratio to produce tires with lower weight (16). 

Polyarylether Ketones. The aromatic polyether ketones are tme thermoplastics. Although several are commercially available, two resins in particular, poly ether ether ketone [31694-16-3] (PEEK) from ICI and poly ether ketone ketone (PEKK) from Du Pont, have received most of the attention. PEEK was first synthesized in 1981 (20) and has been well studied it is the subject of numerous papers because of its potential use in high performance aircraft. Tough, semicrystalline PEEK is prepared by the condensation of bis(4-fiuorophenyl) ketone with the potassium salt of bis(4-hydroxyphenyl) ketone in a diaryl sulfone solvent, such as diphenyl sulfone. The choice of solvent is critical other solvents, such as Hquid HE, promote the reaction but lead to premature low molecular-weight crystals, which do not exhibit sufficient toughness (21). 

Hydroxyl Group. The OH group of cyanohydrins is subject to displacement with other electronegative groups. Cyanohydrins react with ammonia to yield amino nitriles. This is a step in the Strecker synthesis of amino acids. A one-step synthesis of a-amino acids involves treatment of cyanohydrins with ammonia and ammonium carbonate under pressure. Thus acetone cyanohydrin, when heated at 160°C with ammonia and ammonium carbonate for 6 h, gives a-aminoisobutyric acid [62-57-7] in 86% yield (7). Primary and secondary amines can also be used to displace the hydroxyl group to obtain A/-substituted and Ai,A/-disubstituted a-amino nitriles. The Strecker synthesis can also be appHed to aromatic ketones. Similarly, hydrazine reacts with two molecules of cyanohydrin to give the disubstituted hydrazine. 

The diacids are characterized by two carboxyHc acid groups attached to a linear or branched hydrocarbon chain. AUphatic, linear dicarboxyhc acids of the general formula HOOC(CH2) COOH, and branched dicarboxyhc acids are the subject of this article. The more common aUphatic diacids (oxaUc, malonic, succinic, and adipic) as weU as the common unsaturated diacids (maleic acid, fumaric acid), the dimer acids (qv), and the aromatic diacids (phthaUc acids) are not discussed here (see Adipic acid Maleic anhydride, maleic acid, and fumaric acid Malonic acid and derivatives Oxalic acid Phthalic acid and OTHERBENZENE-POLYCARBOXYLIC ACIDS SucciNic ACID AND SUCCINIC ANHYDRIDE). The bihinctionahty of the diacids makes them versatile materials, ideally suited for a variety of condensation polymerization reactions. Several diacids are commercially important chemicals that are produced in multimillion kg quantities and find appHcation in a myriad of uses. 

The tautomerism of six-membered heterocycles has been referred to elsewhere (Section 2.01.1), in connection with the variety of aromatic structures available to heterocyclic compounds. In this section we consider the matter in more detail. For a fuller discussion the reader should consult the monograph by Elguero et al. (76AHC(S1)) which thoroughly covers work on the subject up to 1976. 

---