Area Classification Reviews

Area classification is employed to identify locations where electrical equipment could provide a source of ignition to flammable liquids and gases/vapours that may be present. It is also used to prevent dust explosions. Area classification is necessary for selecting and installing safer electrical and instrumentation equipment, and its review is very important for revamp projects as it may influence site selection and also project cost. In some cases it may require a change in electrical area classification for existing facilities and hence require replacement of some electrical and instrumentation equipment. 

There are several area classification standards such as API RP 500 (2012), API RP 505 (1997), NFPA (National Fire Protection Association) publication 70 (2013), NFPA publication 497, NFPA 70, and local standards in practice. They define classified areas surrounding the individual equipment, based on characteristics and probability of leaked/released liq-uid/gas/solids. This approach reduces fire/explosion risk due to the simultaneous occurrence of a flammable atmosphere and eleetrical ignition to an acceptable level. The project team can use an appropriate area classification standard acceptable to the company and local government authorities. 

---

In this chapter, recent progress in several key areas is reviewed. These areas are catagorized by material classification rather than by end-use application (1) bulk silica optics (2) optically active doped silica glasses (3) gel-polymer composites (4) organically modified silicates (ormosils) and (5) gradient-index glasses. These represent the five most significant developments in the area of bulk optical materials by the sol-gel process to date. 

Review of surrounding plants/facilities Existing pipe racks Maintenance and operations access Sewers and storm water drainage Existing fire and radiation circles Hazardous chemical releases from upwind locations Existing electrical area classification Close access to substations... 

Plot plan, layout, area classification, pressure relief and fire safety design reviews are crucial to make revamp projects safer... 

Part 3, paragraph 126 Review of area classifications, paragraph 127... 

The sequence of families in each Flora is based on the Bentham and Hooker classification system (1862-1883). The accepted scientific names below family level are followed by their authority and references to relevant literature. For taxon at species rank and below, the place of publication and date are also cited. Synonymy is given for names at genus level and below, which is quite extensive in the case of FTA and FZ, but less so for FWTA, and in any case is largely limited to the area under review and adjacent regions. As comprehensive research Floras, both FTEA and FZ cite tjq)e material for the accepted names of species, giving the collector name, locality, and the names of the herbaria where the material is housed (FTEA also provides the types of synonyms). 

The area of nonsteroidal antiestrogens along with other classes of nonsteroidal antagonists of sex-steroid hormone action has been reviewed to 1986, and these compounds have been grouped by chemical stmcture as a basis of classification rather than any biochemical or biological test system utilized to assess antagonist activity (46). 

Chapters 10 to 29 consisted of reviews of plastics materials available according to a chemical classification, whilst Chapter 30 rather more loosely looked at plastics derived from natural sources. It will have been obvious to the reader that for a given application plastics materials from quite different chemical classes may be in competition and attempts have been made to show this in the text. There have, however, been developments in three, quite unrelated, areas where the author has considered it more useful to review the different polymers together, namely thermoplastic elastomers, biodegradable plastics and electrically conductive polymers. 

In this progress report we have reviewed the latest developments in the large area of cationic low-coordinated species and their coordination with Lewis donors. It is clear that these species are of a broad interest, in particular for catalysis. In some cases, e. g. the methylene phosphenium cation, the donor adducts also open new routes for synthesis. Regarding the mechanism for the diverse donor-addition reactions, the structural details are only poorly understood and need a better classification. In particular the variation of the Lewis-donor has to be established. Hitherto in most cases iV-donation is studied. It includes amines or pyridines. Obviously the effect of other donors, such as phosphines, thioethers needs to be studied as well. The siliconium cation for which these effects are better known could provide an understanding for further investigations within this field. 

Other reviews related to this contribution should also be mentioned, in addition to the chapters of this series, which we shall recall later. Some of these deal in general with the problem of classification of indole alkaloids and with chemo-taxonomic investigation (7-5). The chemistry of indole alkaloids is included in the Royal Society of Chemistry s Specialist Periodical Reports and has been extensively reviewed in a one-volume survey edited by J. E. Saxton (6), presenting a reasonably complete, although not exhaustive, picture of the state of the art. Other books on indole alkaloid chemistry treating this area cursorily should also be mentioned (7, 8). Recently, the genus Tabernaemontana was excellently reviewed, particularly with respect to taxonomy, phytochemistry, ethnobotany, and pharmacology (9). 

A good look at the index of this book indicates the items commonly encountered in examinations. The index is an exhaustive one and is divided into proprietary names, generic names, subject areas and conditions. A self-assessment exercise is to check that you have adequate knowledge of examples of the topics listed above and then attempt the tests. A review of the drugs in the index provides examples of medicines that certainly need attention. You should be familiar with the action, classification, side-effects, clinically significant drug interactions, contraindications and cautions of a number of classes of drugs, such as ... 

In this section a variety of analytical separations reported in the literature are reviewed to show the wide structural diversity of eluite which can be separated by RPC and to assist the reader in becoming similar with the use of this fluid chromatographic technique. The descriptions are ar-ranged according to the matrix in which an analyte is found or the area of - h istry in which the samples are generally encountered. Thus theophylline, for example, is regarded as a nucleotide and, for the most part, its analysis in food samples is found with appropriate cross references. On the other hand, the separations of pharmaceuticals found in serum, urine, and pharmaceutical samples are cited separately. It is hoped that this method of classification may serve the purposes of those wh e analytical interests are incidental to their primary research pursuits. 

This chapter discusses mixed-integer nonlinear optimization applications in the area of distillation-based separation system synthesis. Section 9.1 introduces the reader to the generic definition of separation system synthesis and provides a classification of the different types of separations based on distillation column sequencing. For further reading on separation system synthesis the reader is referred to the reviews by Westerberg (1985) and Nishida et al. (1981)... 

---