Alkali electrode

The dissolved fuel principle can, in theory, be used with acid electrolyte fuel cells. However, practical considerations mean that only alkali electrodes are viable. It is very difhcnlt, for example, to make an active catalyst in a low-temperature acid electrolyte fuel cell that does not nse precious metals and that will not therefore oxidise the fuel. 

In these electrodes, the active material is a large organic molecule capable of interacting specifically with an anion or cation. Typical of these materials are the phosphate diesters (R0)2P02, used for calcium ion electrodes, metal complexes used for anion electrodes and the neutral macrocyclic crown ethers which are suitable for alkali-electrodes. The active organic molecule is adsorbed onto an inert porous support or dissolved in an organic solvent, and indeed their selectivity can be aflected by the choice of medium. Some typical electrodes are shown in Table 12.4. 

Graphite reacts with alkali metals, for example potassium, to form compounds which are non-stoichiometric but which all have limiting compositions (for example K C) in these, the alkaU metal atoms are intercalated between the layers of carbon atoms. In the preparation of fluorine by electrolysis of a molten fluoride with graphite electrodes the solid compound (CF) polycarbon fluoride is formed, with fluorine on each carbon atom, causing puckering of the rings. 

Bromine has a lower electron affinity and electrode potential than chlorine but is still a very reactive element. It combines violently with alkali metals and reacts spontaneously with phosphorus, arsenic and antimony. When heated it reacts with many other elements, including gold, but it does not attack platinum, and silver forms a protective film of silver bromide. Because of the strong oxidising properties, bromine, like fluorine and chlorine, tends to form compounds with the electropositive element in a high oxidation state. 

Platinum is a beautiful silvery-white metal, when pure, and is malleable and ductile. It has a coefficient of expansion almost equal to that of soda-lime-silica glass, and is therefore used to make sealed electrodes in glass systems. The metal does not oxidize in air at any temperature, but is corroded by halogens, cyanides, sulfur, and caustic alkalis. 

There have been a number of cell designs tested for this reaction. Undivided cells using sodium bromide electrolyte have been tried (see, for example. Ref. 29). These have had electrode shapes for in-ceU propylene absorption into the electrolyte. The chief advantages of the electrochemical route to propylene oxide are elimination of the need for chlorine and lime, as well as avoidance of calcium chloride disposal (see Calcium compounds, calcium CHLORIDE Lime and limestone). An indirect electrochemical approach meeting these same objectives employs the chlorine produced at the anode of a membrane cell for preparing the propylene chlorohydrin external to the electrolysis system. The caustic made at the cathode is used to convert the chlorohydrin to propylene oxide, reforming a NaCl solution which is recycled. Attractive economics are claimed for this combined chlor-alkali electrolysis and propylene oxide manufacture (135). 

Fig. 2.33 Potential difference Kbetween a redox electrode and a nickel electrode immersed in an alkali chloride melt 700°C, argon atmosphere ...

As may be seen from the diagram, silver in highly alkaline solution corrodes only within a narrow region of potential, provided complexants are absent. It is widely employed to handle aqueous solutions of sodium or potassium hydroxides at all concentrations it is also unaffected by fused alkalis, but is rapidly attacked by fused peroxides, which are powerful oxidising agents and result in the formation of the AgO ion Table 6.6 gives the standard electrode potentials of silver systems. 

Electrodes and Galvanic Cells. The Silver-Silver Chloride Electrode. The Hydrogen Electrode. Half-cells Containing an Amalgam, Electrode. Two Cells Placed Back to Back. Cells Containing Equimolal Solutions. The Alkali Chlorides as Solutes. HC1 in Methanol or Ethanol Containing a Trace of Water. The Alkali Chlorides in Methanol-Water Mixtures. The Heal of Solution of HC1. Proton Transfer Equilibrium from Measurements of E.M.F. 

The Alkali Chlorides as Solutes. In order to make a similar study of the transference of KC1, NaCl, and LiCl between water and methanol-water mixtures, the hydrogen electrode was replaced by an amalgam electrode, as described in Sec. 111. The arrangement when two cells having potassium amalgam electrodes are placed back to back may be written... 

In all cases some sensitivity to hydrogen ions remains in any potentiometric determination with these modified glass electrodes the hydrogen ion concentration of the solution must be reduced so as to be not more than 1 per cent of the concentration of the ion being determined, and in a solution containing more than one kind of alkali metal cation, some interference will be encountered. 

An example of a modem instrument of this type is the Coming Model 410 flame photometer. This model can incorporate a lineariser module which provides a direct concentration read-out for a range of clinical specimens. Flame photometers are still widely used especially for the determination of alkali metals in body fluids, but are now being replaced in clinical laboratories by ion-selective electrode procedures (see Section 15.7). 

Whereas the electrochemical decomposition of propylene carbonate (PC) on graphite electrodes at potentials between 1 and 0.8 V vs. Li/Li was already reported in 1970 [140], it took about four years to find out that this reaction is accompanied by a partially reversible electrochemical intercalation of solvated lithium ions, Li (solv)y, into the graphite host [64], In general, the intercalation of Li (and other alkali-metal) ions from electrolytes with organic donor solvents into fairly crystalline graphitic carbons quite often yields solvated (ternary) lithiated graphites, Li r(solv)yC 1 (Fig. 8) [7,24,26,65,66,141-146],... 

It is now well established that in lithium batteries (including lithium-ion batteries) containing either liquid or polymer electrolytes, the anode is always covered by a passivating layer called the SEI. However, the chemical and electrochemical formation reactions and properties of this layer are as yet not well understood. In this section we discuss the electrode surface and SEI characterizations, film formation reactions (chemical and electrochemical), and other phenomena taking place at the lithium or lithium-alloy anode, and at the Li. C6 anode/electrolyte interface in both liquid and polymer-electrolyte batteries. We focus on the lithium anode but the theoretical considerations are common to all alkali-metal anodes. We address also the initial electrochemical formation steps of the SEI, the role of the solvated-electron rate constant in the selection of SEI-building materials (precursors), and the correlation between SEI properties and battery quality and performance. 

Alkali and alkaline-earth metals have the most negative standard reduction potentials these potentials are (at least in ammonia, amines, and ethers) more negative than that of the solvated-electron electrode. As a result, alkali metals (M) dissolve in these highly purified solvents [9, 12] following reactions (1) and (2) to give the well-known blue solutions of solvated electrons. 

These reactions proceed to equilibrium when the potential of the solvated-electron electrode equals that of the alkali metal L13] ... 

---