Electrode, hydrogen

The last example presented in this section deals with the pitting corrosion of Fe in CIO solutions. Perchlorate is less known as an aggressive ion but reveals some unique and remarkable characteristics with regard to pitting corrosion. For example, the critical pitting potential (1.46 V against a standard hydrogen electrode (SHE) for Fe/1 M NaClO ) can be measured with an accuracy of less than 4 mV [61] which is very unexpected if compared to... 

Since it is not possible to measure a single electrode potential, one electrode system must be taken as a standard and all others measured relative to it. By international agreement the hydrogen electrode has been chosen as the reference ... 

For many purposes the hydrogen electrode is not convenient and it can be replaced by another cell of known standard electrode potential. A well-known example is the calomel cell shown in Figure 4.5. 

Figure 3-1 Voltage Measurements on a Silver-Silver Chloride, Hydrogen Cell at 298.15 K. The contribution of the Standard Hydrogen Electrode is taken as zero by convention.

Solid angle over which radi- Standard hydrogen electrode SHE... 

Standard Hydrogen Electrode The standard hydrogen electrode (SHE) is rarely used for routine analytical work, but is important because it is the reference electrode used to establish standard-state potentials for other half-reactions. The SHE consists of a Pt electrode immersed in a solution in which the hydrogen ion activity is 1.00 and in which H2 gas is bubbled at a pressure of 1 atm (Figure 11.7). A conventional salt bridge connects the SHE to the indicator half-cell. The shorthand notation for the standard hydrogen electrode is... 

A particular concentration measure of acidity of aqueous solutions is pH which usually is regarded as the common logarithm of the reciprocal of the hydrogen-ion concentration (see Hydrogen-ION activity). More precisely, the potential difference of the hydrogen electrode in normal acid and in normal alkah solution (—0.828 V at 25°C) is divided into 14 equal parts or pH units each pH unit is 0.0591 V. Operationally, pH is defined by pH = pH(soln) + E/K, where E is the emf of the cell ... 

Corrective action should be initiated when value is > — 0.23 V against the standard hydrogen electrode (SHE). Plant-specific values should be estabUshed for protection of stainless steels and nickel-based critical components. 

Laboratory experiments have shown that IGSCC can be mitigated if the electrochemical potential (ECP) could be decreased to —0.230 V on the standard hydrogen electrode (SHE) scale in water with a conductivity of 0.3 ]lS/cm (22). This has also been demonstrated in operating plants. Equipment has been developed to monitor ECP in the recirculation line and in strategic places such as the core top and core bottom, in the reactor vessel during power operation. 

Fig. 6. Band edge positions of several semiconductors ia contact with an aqueous electrolyte at pH 1 ia relation to the redox (electrode) potential regions (vs the standard hydrogen electrode) for the oxidation of organic functional groups (26,27).

Other Coordination Complexes. Because carbonate and bicarbonate are commonly found under environmental conditions in water, and because carbonate complexes Pu readily in most oxidation states, Pu carbonato complexes have been studied extensively. The reduction potentials vs the standard hydrogen electrode of Pu(VI)/(V) shifts from 0.916 to 0.33 V and the Pu(IV)/(III) potential shifts from 1.48 to -0.50 V in 1 Tf carbonate. These shifts indicate strong carbonate complexation. Electrochemistry, reaction kinetics, and spectroscopy of plutonium carbonates in solution have been reviewed (113). The solubiUty of Pu(IV) in aqueous carbonate solutions has been measured, and the stabiUty constants of hydroxycarbonato complexes have been calculated (Fig. 6b) (90). 

---