Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alcohols esters derived from

Esters react with two equivalents of a Grignard reagent to produce terti ary alcohols Two of the groups bonded to the car bon that bears the hy droxyl group in the terti ary alcohol are derived from the Grignard re agent... [Pg.848]

Esters derived from the primary alcohols are the most stable and those derived from the tertiary alcohols are the least stable. The decomposition temperature is lower in polar solvents, eg, dimethyl sulfoxide (DMSO), with decomposition occurring at 20°C for esters derived from the tertiary alcohols (38). Esters of benzyl xanthic acid yield stilbenes on heating, and those from neopentyl alcohols thermally rearrange to the corresponding dithiol esters (39,40). The dialkyl xanthate esters catalytically rearrange to the dithiol esters with conventional Lewis acids or trifluoroacetic acid (41,42). The esters are also catalytically rearranged to the dithiolesters by pyridine Ai-oxide catalysts (43) ... [Pg.363]

Alkyl boric acid esters derived from straight-chain alcohols and aryl boric acid esters are stable to relatively high temperatures. Methyl borate is stable to 470°C (11). Trialkoxyboranes from branched-chain alcohols are much less stable, and boranes from tertiary alcohols can even decompose at 100°C (12). Decomposition of branched-chain esters leads to mixtures of olefins, alcohols, and other derivatives. [Pg.214]

Strong nucleophiles such as Grignard reagents. In general, ortho esters are difficult to prepare directly from acids and are therefore more often prepared from the nitrile. Simple ortho esters derived from normal alcohols are the least stable in terms of acid stability and stability toward Grignard reagents, but as the ortho ester becomes more constrained its stability increases. [Pg.268]

In aqueous dioxane, the endo-anti isomer gave a product mixture consistent of alcohol N and the corresponding ester (derived from capture of the leaving group p-nitrobenzoate). The other isomers gave much more complex product mixtures which were not completely characterized. Explain the trend in rates and discuss the structural reason for the stereochemical course of the reaction in the case of the endo-anti isomer. [Pg.346]

Poly(vinyl alcohol) Polymer derived from the hydrolysis of polyvinyl esters. [Pg.157]

If primary alcohols with a straight chain of 10-20 carbon atoms are initially alkoxylated by a mixture of ethylene and propylene oxides followed by phosphorylation, a pour point depression to 8°C will occur, whereas phosphate esters derived from nonylphenol are liquid at temperatures as low as 2°C. Phosphoric acid esters on the base of linear primary alcohols (Cn-Cl5) generally solidify below 24°C [50] (Table 2). [Pg.561]

Although menthyl esters, especially 19, are most often used to prepare sulfoxides, esters derived from optically active alcohols other than menthol have been prepared . Ridley and Smal prepared arenesulfmic esters of 1,2 5,6-di-O-cyclohexylidene-a-D-glucofuranose. Unfortunately, these diastereomers were oils, except for the mesityl derivative, with the major epimer having configuration R at sulfur and so they offered no advantage over the menthyl esters. Separation of the epimers by chromatography failed. [Pg.63]

The ability of hydrolases to hydrolyse esters derived from primary alcohols in the presence of esters derived from secondary alcohols has been recognized (Scheme 3)[11]. [Pg.7]

The group name is intended to cover esters derived from sulfenic, sulfinic and sulfonic acids, some of which are thermally unstable. This is especially so for esters of unsaturated alcohols, which are also liable to polymerise, catalysed by the liberated acids. Individually indexed compounds are ... [Pg.396]

In two studies toward the total synthesis of natural products it could be shown that the a,jS-unsaturated esters derived from the vinylogous Mukaiyama aldol reactions can be further functionalized into advanced intermediates. The C1-C7 segment of oleandolide commences with the VMAR of aldehyde 68 derived from the Roche ester. The so-generated stereo-triad was protected as PMB ether and the ester 76 was reduced to the allylic alcohol. Sharpless asym-... [Pg.69]

With both building blocks 103 and 109 in hand, the total synthesis of lb was completed as shown in Scheme 17. Coupling of acid 103 and alcohol 109 under Yamaguchi conditions to give ester 110 and subsequent desilylation followed by chemoselective oxidation provided hydroxy acid 111. Lactonization of the 2-thiopyridyl ester derived from 111 in the presence of cupric bromide produced the macrodiolide 112 in 62% yield, which was finally converted to pamamycin-607 (lb) via one-pot azide reduction/double reductive AT-methylation. In summary, 36 steps were necessary to accomplish the synthesis of lb from alcohols 88 and 104, sulfone 91, ketone 93, and iodide rac-97. [Pg.230]

A series of imidate esters derived from secondary alcohols has been found to react with potassium benzoate or potassium phthalimide to give products of 5 n2 substitution in excellent yields and with clean inversion of stereochemistry. ... [Pg.343]

A current limitation of the amination methodology is encountered with carbamate esters derived from 2° alcohols (that is, 22 and 24 in Scheme 17.14). With some notable exceptions, substrates in this class often give only small amounts ( 0-20%) of oxazolidinone, and instead afford the corresponding ketones in variable yields. A similar observation has been made by Doyle for C-H insertion reactions with 1-indanol diazo-... [Pg.388]

Carboxylic acids can also be protected as ortho esters. Ortho esters derived from simple alcohols are very easily hydrolyzed, and a more useful ortho ester protecting group is the 4-methyl-2,6,7-trioxabicyclo[2.2.2]octane structure. These bicyclic orthoesters can be prepared by exchange with other ortho esters, by reaction with iminoethers, or by rearrangement of the ester derived from 3-hydroxymethyl-3-methyloxetane. [Pg.838]

Some alicyclic alcohols are important as synthetic sandalwood fragrances. A few alicyclic aldehydes are valuable perfume materials and are obtained by Diels Alder reactions using terpenes and acrolein. Esters derived from hydrogenated aromatic compounds, such as /cr/-butylcyclohexyl and decahydro-/3-naphthyl acetates, are also used in large amounts as fragrance materials. [Pg.76]

The acid moiety generally determines the odor of esters derived from aromatic or araliphatic acids. Unless stated otherwise, the esters are prepared from the corresponding acids or acid derivatives and alcohols by the customary methods. [Pg.119]

Solid esters are easily crystallisable materials. It is important to note that esters of alcohols must be recrystallised either from non-hydroxylic solvents (e.g. toluene) or from the alcohol from which the ester is derived. Thus methyl esters should be crystallised from methanol or methanol/toluene, but not from ethanol, n-butanol or other alcohols, in order to avoid alcohol exchange and contamination of the ester with a second ester. Useful solvents for crystallisation are the corresponding alcohols or aqueous alcohols, toluene, toluene/petroleum ether, and chloroform (ethanol-free)/toluene. Carboxylic acid esters derived from phenols are more difficult to hydrolyse and exchange, hence any alcoholic solvent can be used freely. Sulphonic acid esters of phenols are even more resistant to hydrolysis they can safely be crystallised not only from the above solvents but also from acetic acid, aqueous acetic acid or boiling n-butanol. [Pg.57]

Chiral halohydrins epoxides.1 The esters (2) of the chiral alcohol 1 derived from camphor-10-sulfonic acid, are converted to a-chloro esters (3) by O-silylation and reaction with NCS with high diastereoselectivity. Reduction of 3 with Ca(BH4)2 results in the recovered auxiliary and the chlorohydrin 4 with clean retention. Cyclization of 4 to the terminal epoxide 5 proceeds with clean inversion. [Pg.62]

Reaction XLIV. (b) Condensation of Alkyl and Aryl Halogen Compounds with the Sodio- and other Metallo-derivatives of Ethyl Aceto-acetate and its Homolognes. (A., 186, 214 201, 143 213, 143.)—Like malonic ester, acetoacetic ester contains two 1 3-carbonyl groups with a methylene group in position 2. It is only to be expected then that it yields with metallic sodium or sodium alcoholate sodio-derivatives from which mono- and di-, alkyl and aryl homologues can be obtained by treatment with a suitable halide, including halogen esters. Acetoacetic acid... [Pg.137]

Since esters are derived from carboxylic acids and alcohols, they are named by first identifying the alcohol-related part and then the acid-related part, using the -ate ending. Ethyl acetate, for example, is the ester derived from ethanol and acetic acid. [Pg.1014]

Phthalic anhydrides readily form hydrogen phthalate esters on reaction with alcohols the derivatives from 3-nitrophthalic anhydride are usually nicely crystalline compounds and are hence suitable for purposes of characterisation. Hydrogen phthalate esters are also useful in appropriate instances for the resolution of racemic alcohols (Section 5.19). [Pg.1075]

Ethers and esters derived from the alcohol also show activity in vivo. The ring structure of retinol ((i-ionone), or the more unsaturated ring in 3-dehydroretinol (dehydro-P-ionone), is essential for activity hydrogenation destroys biological activity. Of all known derivatives, all-/ran,v-retinol and its aldehyde, retinal, exhibit the greatest biological potency in vivo 3-dehydroretinol has about 40% of the potency of all-bms-retinol. [Pg.617]

The IUPAC rules name esters as alkyl alkanoates. That is, the portion of the ester derived from the alcohol is named as an alkyl group. The portion of the ester that is derived from the carboxylic acid is named as the conjugate base of that acid. It is easy to distinguish these parts. The half derived from the carboxylic acid has the carbonyl group. Pentyl ethanoate, or pentyl acetate, is one ester used as artificial banana flavoring. Figure 11.51 shows three ester nomenclature examples. [Pg.306]

Reaction of boronic esters, RB(OR )2, with dichloromethyllithium, LiCHCl2, inserts the CHC1 unit into the carbon-boron bond of the boronic ester. This is known as boronic ester homologation. If boronic esters derived from homochiral alcohols are used in this reaction, then new homochiral centres may be generated as will be illustrated below. [Pg.42]


See other pages where Alcohols esters derived from is mentioned: [Pg.325]    [Pg.63]    [Pg.126]    [Pg.1092]    [Pg.1004]    [Pg.257]    [Pg.155]    [Pg.401]    [Pg.17]    [Pg.228]    [Pg.241]    [Pg.1092]    [Pg.195]    [Pg.148]    [Pg.188]    [Pg.106]    [Pg.49]    [Pg.148]    [Pg.44]   
See also in sourсe #XX -- [ Pg.1033 ]




SEARCH



Alcoholic esters

Alcohols derivatives

Alcohols from esters

Ester derivation

Ester derivatives

Esters alcohols

© 2024 chempedia.info