Air pollutants compounds

Nitrogen Oxides a criteria air pollutant, compounds NO, NO, NO3, NjO, alkyl nitrates, etc. 

Ots, A. 1992. Formation of air-polluting compounds while burning oil shale. Oil Shale, 9, 63-75. 

US EPA Method 311 Analysis of hazardous air pollutant compounds in paints and coatings by direct injection into a GC ... 

Hydrogen sulfide and other sulfur compounds are objectionable in natural gas because they cause corrosion and also form air-polluting compounds during combustion. Carbon dioxide in the gas is objectionable because it lowers the heating value of the gas. 

Polycychc aromatic hydrocarbons (PAHs) are carcinogens produced by the thermal breakdown of organic materials. These are widely distributed in both food and the environment, and are some of the principal carcinogens in cigarette tar and air pollution. Of over 20 PAHs isolated, benzopyrene and quinoline compounds are the most commonly encountered in foods, particularly those which are broiled or fried (111). Shellfish living in petroleum contaminated waters may also contain PAHs (112). 

The lead-bearing components ate released from the case and other nordead-containing parts, followed by the smelting of the battery plates, and refinement to pure lead or specification alloys. The trend toward battery grid alloys having Httle or no antimony, increases the abiHty of a recovery process to produce soft lead (refined). As requited in the production of primary lead, each step in the secondary operations must meet the environmental standards for lead concentration in ait (see Air pollution Lead compounds, industrial toxicology). 

Isopropyl Alcohol. Propylene may be easily hydrolyzed to isopropyl alcohol. Eady commercial processes involved the use of sulfuric acid in an indirect process (100). The disadvantage was the need to reconcentrate the sulfuric acid after hydrolysis. Direct catalytic hydration of propylene to 2-propanol followed commercialization of the sulfuric acid process and eliniinated the need for acid reconcentration, thus reducing corrosion problems, energy use, and air pollution by SO2 and organic sulfur compounds. Gas-phase hydration takes place over supported oxides of tungsten at 540 K and 25... 

Air pollution (qv) problems are characteri2ed by their scale and the types of pollutants involved. Pollutants are classified as being either primary, that is emitted direcdy, or secondary, ie, formed in the atmosphere through chemical or physical processes. Examples of primary pollutants are carbon monoxide [630-08-0] (qv), CO, lead [7439-92-1] (qv), Pb, chlorofluorocarbons, and many toxic compounds. Notable secondary pollutants include o2one [10028-15-6] (qv), O, which is formed in the troposphere by reactions of nitrogen oxides (NO ) and reactive organic gases (ROG), and sulfuric and nitric acids. 

Carbon monoxide was discovered in 1776 by heating a mixture of charcoal and 2inc oxide. It provided a source of heat to industry and homes as a component of town gas and was used as a primary raw material in German synthetic fuel manufacture during World War II its compounds with transition metals have been studied extensively (see Carbonyls). Most recently, carbon monoxide emission from vehicle exhausts has been recognized as a primary source of air pollution (qv). 

In 1966, the Los Angeles Air Pollution Control Board designated trichloroethylene as a photochemically reactive solvent that decomposes in the lower atmosphere, contributing to air pollution. In 1970 all states were requited to submit pollution control plans to EPA to meet national air quaUty standards. These plans, known as State Implementation Plans (SIPS), controlled trichloroethylene as a volatile organic compound (VOC). They were designed to have each state achieve the National Ambient Air QuaUty Standard (NAAQS) for ozone. The regulations were estabUshed to control the emission of precursors for ozone, of which trichloroethylene is one. 

Human-made sources cover a wide spectrum of chemical and physical activities and are the major contributors to urban air pollution. Air pollutants in the United States pour out from over 10 million vehicles, the refuse of over 250 million people, the generation of billions of kilowatts of electricity, and the production of innumerable products demanded by eveiyday living. Hundreds of millions of tons of air pollutants are generated annu ly in the United States alone. The five main classes of pollutants are particulates, sulfur dioxide, nitrogen oxides, volatile organic compounds, and carbon monoxide. Total emissions in the United States are summarized by source categoiy for the year 1993 in Table 25-10. 

Hundreds of chemical species are present in urban atmospheres. The gaseous air pollutants most commonly monitored are CO, O3, NO2, SO2, and nonmethane volatile organic compounds (NMVOCs), Measurement of specific hydrocarbon compounds is becoming routine in the United States for two reasons (1) their potential role as air toxics and (2) the need for detailed hydrocarbon data for control of urban ozone concentrations. Hydrochloric acid (HCl), ammonia (NH3), and hydrogen fluoride (HF) are occasionally measured. Calibration standards and procedures are available for all of these analytic techniques, ensuring the quality of the analytical results... 

Within 6 months after enactment of the Qean Air Act Amendments of 1990, and at least every 3 years thereafter, the Administrator shall review and, if necessary, revise, the methods ( emission factors ) used for purposes of this Act to estimate the quantity of emissions of carbon monoxide, volatile organic compounds, and oxides of nitrogen from sources of such air pollutants (including area sources and mobile sources). In addition, the Administrator shall permit any person to demonstrate improved emissions estimating techniques, and following approval of such techniques, the Administrator shall authorise the use of such techniques. Any such technique may be approved only after appropriate public participation. Until the Administrator has completed the revision required by this section, nothing in this section shall be construed to affect the validity of emission factors established by the Administrator before the date of the enactment of the Clean Air Act Amendments of 1990. 

In nonindustrial settings, MCS substances are the cause of indoor air pollution and are the contaminants in air and water. Many of the chemicals which trigger MCS symptoms are known to be irritants or toxic to the nervous system. As an example, volatile organic compounds readily evaporate into the air at room temperature. Permitted airborne levels of such contaminants can still make ordinary people sick. When the human body is assaulted with levels of toxic chemicals that it cannot safely process, it is likely that at some point an individual will become ill. For some, the outcome could be cancer or reproductive damage. Others may become hypersensitive to these chemicals or develop other chronic disorders, while some people may not experience any noticeable health effects. Even where high levels of exposure occur, generally only a small percentage of people become chemically sensitive. 

The principal air pollutants are particulate matter (PM) and volatile organic compounds (VOCs). These are released from mixing and coating operations. Pollution prevention practices generally employed to reduce air emissions include ... 

In addition to chemicals covered under TRI, many other chemicals are released. For example, the EPA Office of Air Quality Planning and Standards has compiled air pollutant emission factors for determining the total air emissions of priority pollutants (e.g., VOCs, SO, NO, CO, particulates, etc.) from many refinery sources. The EPA Office of Aerometric Information Retrieval System (AIRS) contains a wide range of information related to stationary sources of air pollution, including the emissions of a number of air pollutants which may be of concern within a particular industry. With the exception of volatile organic compounds (VOCs), there is little overlap with the TRI chemicals reported above. 

There are literally many thousands of chemical compounds that are potential air pollutants. It would be impossible to present all the pertinent data and information needed to evaluate each and every air pollution scenario. There are, however, a wealth of information and data bases that are available on the worldwide Web, along with a number of standard hard copy references to obtain information on the chemical and physical properties, and health risks of potential atmospheric contaminants. 

TANKS This program estimates volatile organic compound (VOC) and hazardous air pollutant (HAP) emissions from fixed- and floating-roof storage tanks. TANKS is based on the emission estimation procedures from... 

---