Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cleaning adhesion

Spirit A 0.675 40- too Rubber-based adhesives cleaning fluids, degreasing fluids... [Pg.272]

G-White. [J.M. Huber] Calcium carbonate functional filler/extender for coatings, plastics, rubber, building prods., ceramics flux, paper fillers, adhesives, cleaning compds., and polishing agents. [Pg.164]

OTHER COMMENTS used in the surface coating industry used in the manufacture of synthetic resins, adhesives, cleaning fluids, and paint removers used in pharmaceuticals and cosmetics. [Pg.442]

Products and Uses Used in fabric dyes, leather dyes, adhesives, cleaning compound, and polishing compound. [Pg.168]

Uses Disp. for nonwoven fabrics, paints, varnishes, inks, glues and adhesives, cleaning and waxing prods., and for synthesis of vise, modifiers and pour pt. depressants Reguiatory DOT nonregulated... [Pg.491]

Chem. Descrip. 2-Ethylhexyl acrylate CAS 103-11-7 EINECS/ELINCS 203-080-7 Uses Copolymer intermediate for resins and dispersions forfabrics, inks, glues, and adhesives cleaning and waxing prods. org. synthesis aq. disp. for nonwoven fabrics, textiles, and paper additives for fuel oils and lubricants syn. rubber and latexes plastics and syn. resins Properties APFIA10 max. clear liq. m.w. 184 sp.gr. 0.880 vise. 1.52 mPa s vapor pressure < 1 mbar (20 C) f.p. - 90 C b.p. 213.5 C ( 1013 mbar) flash pt. (OC) 92 C ref. index 1.433 Precautiorr Flamm. [Pg.578]

Megasolv NOC/ Petroferm Propoxy propanol, methoxy and methyl ethyloxy propanol, and N-methyl pyrrolidone Room temperature cleaning of electronic assemblies, surface-mount adhesive cleaning (misprints and stencils). Used in pressure spray, immersion, and ultrasonic applications. N/A 180-202 Low N/A 82 <1 (20°C)... [Pg.174]

Zestron SD 300/ Zestron Modified alcohol cleaner SMT or conductive adhesive cleaning in spray-in-air cleaners at ambient N/A 120-150 24.9 N/A 41 4.7... [Pg.177]

General considerations The work process and equipment should be so specified that there is no physical contact with the adhesive, no likelihood of eye contact, that any flammability concerns are addressed (e.g. elimination of sparking by correct electrical zoning), that procedures for adhesive clean-up and disposal are adequate and that ventilation and or extraction is sufficient. The supplier s MSDS must be available and read by all personnel likely to come into contact with adhesives (from good received to waste disposal). Skin contact should be avoided, otherwise there may be risk of dermatitis, made worse by minor skin abrasions or small cuts. In particular, chaffed, open-pore skin around collars and cuffs may be particularly sensitive. [Pg.222]

The advantages are no mixing, exact calibration of the quantity of adhesive, clean application. [Pg.179]


See other pages where Cleaning adhesion is mentioned: [Pg.167]    [Pg.171]    [Pg.136]    [Pg.109]    [Pg.361]    [Pg.310]    [Pg.108]    [Pg.493]    [Pg.180]    [Pg.175]    [Pg.175]    [Pg.148]    [Pg.150]    [Pg.1031]    [Pg.1232]    [Pg.1369]    [Pg.4]    [Pg.809]    [Pg.2946]    [Pg.4257]    [Pg.129]    [Pg.103]    [Pg.308]    [Pg.108]    [Pg.97]    [Pg.96]    [Pg.2022]    [Pg.2248]    [Pg.2482]   
See also in sourсe #XX -- [ Pg.121 , Pg.134 ]




SEARCH



Cleaning with alkali adhesion

Self-cleaning adhesive

© 2024 chempedia.info