Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Additional Items

Outside contractors. The onsite employer and the outside employer must inform each other of their respective lockout or tagout procedures. Each employer must ensure that his or her personnel understand and comply with all restrictions and/or prohibitions of the other employer s energy-control program. [Pg.101]

This interface is best accomplished by preplanning. The time to talk to the contractor is when a work order or contract is developed, prior to the work being done. The development stage, while the contractor and staff will be at the warehouse, is also a good time to discuss other safety issues. [Pg.101]

Group lockout. This is a hasp on a disconnect box or other energy-producing item that allows for multiple locks. Each person servicing the piece of equipment must add his lock and tag. As each worker finishes the project, his lock is removed from the multiholed hasp. [Pg.101]

Shift work. The written lockout/tagout program must take into account the possibility of shift work affecting the program. A particular project may have to be conq)leted by the next shift. En5)loyees should discuss the project and/or have the supervisor present so he/she knows the circumstances. Just because a shift ends is no reason for an employee to remove the lock and tag from the machine. Communication between employees will go a long way in preventing injuries. [Pg.101]

Visuals. Color-coding of locks by group or department may help augment the program. Locks as well as tags must be durable enough to withstand the working environment. [Pg.101]


On occasions, the amount of a claim will be found to exceed the sum insured, and as the sum insured is the maximum amount the insurer will pay, the insured will not be fully compensated for his loss. It is the responsibility of the insured, with the assistance of his broker or other intermediary, to ensure that sums insured are adequate and are not eroded by inflation. The plant engineer also has a responsibility to inform his broker if he increases the value of plant items, adds substantially to the total value of items at any one location or, where items are insured individually, takes additional items into service or removes them from service. [Pg.149]

If the pattern of yields obtained is similar to that observed through neutron bombardment, then Auger ionization can be eliminated as a necessary mode of excitation. (The reverse experiment is not so easily conceived.) An additional item of flexibility is added in the possible use... [Pg.103]

Palazov s recent infrared studies supplied two additional items of evidence in favor of this suggestion (75) ... [Pg.318]

Add Additional item (If so, the return line ftem the system PCV shall be located below the minimum operating oil level.)... [Pg.117]

Additional item The pressure switches shall be located in accordance with ISO 104383, Figure A.5... [Pg.117]

Additional item The replaceable filter shall be in accordance with ISO 10438-3... [Pg.117]

The 17-item HDRS is the most commonly used scale in antidepressant clinical trials. This version of the HDRS is heavily weighted toward melancholic symptoms. There are also 21-item, 24-item, and 28-item versions with the additional items assessing nonmelancholic symptoms. The Montgomery-Asberg Depression Scale (MADRS) is another instrument that is frequently used in antidepressant clinical trials. [Pg.118]

One additional item of experimental evidence for the dimeric association of polyisoprenyl lithium was provided by a light scattering study (21), in n-hexane at 25°C., where it was found that the molecular weight of the terminated polymer was very close to one-half that of the active polymer. All of these data seem to leave no doubt that the active chain ends in the organo-lithium polymerization of styrene, isoprene and butadiene, in non-polar solvents, are associated as pairs, at least at chain-end concentrations of 10 2 M or less. This conclusion has also been supported by data obtained in four other laboratories (22,... [Pg.26]

Lastly, in recognition of the growing importance of nanoscale science as an interdisciplinary field with contributions from all the areas of chemistry, and other disciplines the Examinations Institute has begun the process of writing questions developed around nanoscale science concepts, experiments, and methods. We expect that these questions will be additional items which instructors can choose to incorporate into their examinations if those materials are discussed in their courses. These questions are still under development with the committee preparing for publication in 2007. [Pg.248]

There is no standard report form offered because the standard requires it be completed and in accordance with any specific instructions in the test or calibration methods (subsection 5.10.1). It is noteworthy that the general notes to subsection 5.10 do allow a simplified report to be issued to internal clients, as long as the full information is readily available in the laboratory. There are 11 items that are required on test reports and calibration certificates (unless there are valid reasons for their exclusion) plus five additional items that cover aspects of interpretation and six items when sampling has also been carried out as part of the test. Increasingly test reports are submitted electronically. This is referred to in the standard (subsection 5.10.7) and is allowed as long as the requirements of the standard are met. Of importance is the integrity of the report and the nature of the signature when the report is sent by e-mail or via the Internet. [Pg.278]

Additional items that were not detailed in the aforementioned protocol description may be monitored during validation. [Pg.391]

Immusoft is a software that has been developed to perform computer-driven assays in our microchips. This software has a user-friendly graphical user interface, and it enables control of the pump, the valves and the electrochemical detection system, as well as the development of specific assay protocols, the running of simultaneous or sequential experiments in eight parallel microchannels, the automatic read-out of the results and the processing of the obtained data. These different functions are managed by way of three main menus, named Method, Analysis and Results, and the software also comprises two additional items dedicated to the setting of the computing parameters and to the maintenance of the instrumentation. [Pg.894]

Adding an estimating allowance of about 10 of total onplot and offplot investment to account for the cost of additional items which the history of major projects shows are encountered as the detailed project engineering proceeds. [Pg.113]

The nurse can retrieve either the wrong item or additional items to use for other patients. [Pg.529]

Additional items may be added to a job description based on the characteristics of the corporation and the specific needs that determine a position. For instance, a corporation that has multiple jobs in areas of distribution, marketing, and operations will have job descriptions that vary considerably based on the work performed. [Pg.583]

Figures 8.10 and 8.11 are based on the driver FOB fabrication shop cost only. For the completed driver package, additional items, such as a surface condenser for the condensing steam turbine or a starting motor or air piston starter for the gas engine, are required. Tables 8.29 to 8.32 are each dedicated to providing factoring for these specific costs. Such costs will again be based on the compressor horsepower, BHP. Figures 8.10 and 8.11 are based on the driver FOB fabrication shop cost only. For the completed driver package, additional items, such as a surface condenser for the condensing steam turbine or a starting motor or air piston starter for the gas engine, are required. Tables 8.29 to 8.32 are each dedicated to providing factoring for these specific costs. Such costs will again be based on the compressor horsepower, BHP.
Additional items, such as corporate overhead, research, and development vary among refineries and companies. These items are omitted here. [Pg.352]

We ask you to take time to communicate with CDER about this Web site. What information is and is not useful to you in understanding CDER s international activities What additional items or categories of information would you like us to add Please use our comments form. [Pg.351]

The methodology used to decide which projects should make up the annual plan, the targets for R D, is described in Section D. The annual plans for technical service or analytical support will normally be drawn up to match the requirements of the projects in the R D plan, with additional items covering business and manufacturing support... [Pg.114]

This has particular limiting effects for sample preparation because of the detailed specifications given for equipment and chemicals approved for the sample preparation kit. The items of the sample preparation kit and not their purpose have been specified in detail. It turned out that some items, originally approved on the list, where not available on the market, except if custom produced for the OPCW. Because of these detailed specifications, developments in the area of sample preparations cannot easily be applied to on-site analysis. As a result, any change to sample preparation procedures that require an additional item of equipment, or more so an additional chemical, such as a different solvent (i.e. for sample clean up), cannot be implemented until the list of approved equipment is amended. [Pg.17]

Additional items of concern in Patterson s paper delineating IUPAC s system of organic chemical nomenclature include ... [Pg.23]

Calorimetry. See the detailed list at the end of Exp. 6. An additional item required here is a 2-mL disposable hypodermic syringe. [Pg.166]

You now know a11 you need to make and use my grenades, however, there are a few additional items. 1 will list these for convenience. [Pg.15]

Now we add an additional item of information molecules and atoms are lazy. Atoms and molecules like to lower their energy whenever they can. Bowling balls roll downhill, boats float downstream, and molecules settle in the lowest energy arrangement that they can manage. [Pg.195]

This paper will analyse these variations in , and A with a view to rationalising the observations and then examine the A values to determine if they may be used to characterise the damage process via a damage factor and a bridging stress. Such parameters are additional items of information which may be deduced from the usual test which may prove useful in understanding damage in composites caused by interlaminar crack growth. [Pg.480]

As far as configuring the interface is concerned, very little needs to be done. The infrared interfaces are enabled by default on most computers, handhelds, and printers equipped with them. The only additional item that must be configured is the print driver on the PDA, handheld, or computer. The driver must be the correct one for the printer to which you are printing. [Pg.288]

The following numbers of monosaccharide residues per molecule were reported by Ott a-diainylose, 22 a-tetraamylose, 12 a-octaamylose, 63 /3-triamylose or /3-hexaamylose, 6 cellulose, 3 licheiiin, 7 starch, 2 and inulin, 6. The x-ray powder patterns published by Ott appear weak and poorly resolved, lending an additional item of doubt to an already tenuous argument. Herzog examined several known substances by Ott s method out of seven cases, only one was reasonably close to the correct value while the others were off by 40 to 500 %. [Pg.237]

Normally, the sponsor/CRO will prepare all necessary documentation for submission by the investigator to the ethics committee/IRB (it is not usual procedure for the sponsor/CRO to directly submit items to the committee, unless requested to do so by the committee). Whatever the local variations, the sponsor/CRO is usually responsible for ensuring the submission of the items in Table 12.4. Some committees require other additional items. [Pg.144]


See other pages where Additional Items is mentioned: [Pg.458]    [Pg.301]    [Pg.88]    [Pg.1037]    [Pg.1052]    [Pg.1052]    [Pg.14]    [Pg.439]    [Pg.218]    [Pg.168]    [Pg.248]    [Pg.115]    [Pg.407]    [Pg.305]    [Pg.622]    [Pg.392]    [Pg.39]    [Pg.392]    [Pg.581]    [Pg.432]    [Pg.39]    [Pg.295]   


SEARCH



© 2024 chempedia.info