Acrylonitrile-butadiene-styrene applications

The homopolymers, which are formed from alkyl cyanoacrylate monomers, are inherently brittle. For applications which require a toughened adhesive, rubbers or elastomers can be added to improve toughness, without a substantial loss of adhesion. The rubbers and elastomers which have been used for toughening, include ethylene/acrylate copolymers, acrylonitrile/butadiene/styrene (ABS) copolymers, and methacrylate/butadiene/styrene (MBS) copolymers. In general, the toughening agents are incorporated into the adhesive at 5-20 wt.% of the monomer. 

Acrylonitrile-butadiene-styrene (ABS). ABS materials have superior strength, stiffness and toughness properties to many plastics and so they are often considered in the category of engineering plastics. They compare favourably with nylon and acetal in many applications and are generally less expensive. However, they are susceptible to chemical attack by chlorinated solvents, esters, ketones, acids and alkalis. 

Other commercial thermoplastics include acrylonitrile butadiene styrene (ABS), cellulose acetate butyrate (CAB), polycarbonate (PC), nylon (PA), and acetals. These resins are frequently used in consumer applications. 

There are various requirements for impact-modified PVC. The most demanding is for outdoor sidings and window frames, where lifetimes of 20 years are expected. Because butadiene polymers or copolymers (e.g., acrylonitrile/butadiene/styrene (ABS), methyl methacrylate/butadiene/styrene (MBS)) are susceptible to UV degradation these polymers are usually not employed instead acrylate polymers are used for these applications. 

ISO 12092 2000 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes underpressure - Resistance to internal pressure - Test method ISO 15493 2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series ISO 15877-1 2003 Plastics piping systems for hot and cold water installations - Chlorinated poly (vinyl chloride) (PVC-C) - Part 1 General... 

Some of the nonrubber applications are as a chemical intermediate to make adiponitrile and hexamethylenediamine, precursors to making Nylon 66 whose primary application is carpeting. Other nonrubber applications are styrene-butadiene latexes for paper coatings and carpet backing, and acrylonitrile-butadiene-styrene (ABS) resins for plastic pipe and automotive/appliance parts. 

An example of this type of a safer chemical is methacrylonitrile (1) compared with acrylonitrile (2) (Figure 1.1). Both compounds are a, 3-unsaturated aliphatic nitriles, and structurally very similar, but 2 causes cancer whereas 1 does not appear to do so. Among other applications, 2 is used in the production of acrylic and modacrylic fibers, elastomers, acrylonitrile-butadiene-styrene and styrene-acrylonitrile resins, nitrile rubbers, and gas barrier resins. In a study conducted by the US National Toxicology Program (NTP) in which 2 was administered orally to mice for 2 years, there was clear evidence that it caused cancer in the treated mice (in addition to causing other toxic effects), and is classified by the NTP as a probable human carcinogen [26]. 

Over 70% of the total volume of thermoplastics is accounted for by the commodity resins polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) (PVC) (1) (see Olefin polymers Styrene plastics Vinyl polymers). They are made in a variety of grades and because of their low cost are the first choice for a variety of applications. Next in performance and in cost are acrylics, cellulosics, and acrylonitrile—butadiene—styrene (ABS) terpolymers (see... 

Acrylonitrile—Butadiene—Styrene. ABS is an important commercial polymer, with numerous applications. In the late 1950s, ABS was produced by emulsion grafting of styrene—acrylonitrile copolymers onto polybutadiene latex particles. This method continues to be the basis for a considerable volume of ABS manufacture. More recendy, ABS has also been produced by continuous mass and mass-suspension processes (237). The various products may be mechanically blended for optimizing properties and cost. Britde SAN, toughened by SAN-grafted ethylene—propylene and acrylate mbbers, is used in outdoor applications. Flame retardancy of ABS is improved by chlorinated PE and other dame-retarding additives (237). 

Order-disorder transitions and spinodals were computed for linear multi block copolymers with differing sequence distributions by Fredrickson et al. (1992). This type of copolymer includes polyurethanes, styrene-butadiene rubber, high impact polystyrene (HIPS) and acrylonitrile-butadiene-styrene (ABS) block copolymers. Thus the theory is applicable to a broad range of industrial thermoplastic elastomers and polyurethanes. The parameter... 

As of 1992, the first specialty platable plastic, acrylonitrile—butadiene—styrene (ABS) terpolymer (see Acrylonitrile polymers, abs resins), is used in over 90% of POP applications. Other platable plastics include poly(phenylene ether) (see Polyethers), nylon (see Polyamides), polysulfone (see Polymers containing sulfur), polypropylene, polycarbonate, phenolics (see Pphenolic resins), polycarbonate—ABS alloys, polyesters (qv), foamed polystyrene (see Styrene plastics), and other foamed plastics (qv). 

Woddwide sales of poly (phenylene ether)—styrene resin alloys are 100,000—160,000 t/yr (47,96) annual growth rates are ca 9%. Other resin, particulady acrylonitrile—butadiene—styrene (ABS) polymers and blends of these resins with PC resins, compete for similar applications. 

Acrylonitrile-Butadiene-Styrene ABS) is sometimes a terpolymer of three monomers, but in most cases a blend of two copolymers. ABS has an excellent impact strength and a relatively high softening temperature (about 110 °C). Its stiffness is only marginally lower than that of PS. It finds large-scale applications in the automotive industry, in toys, telephones, TV-housings, etc. 

Various patents on the homopolymerization of BD in the presence of styrene are available [581-590]. According to these patents, St is used as a solvent in which BD is selectively polymerized by the application of NdV/DIBAH/EASC. At the end of the polymerization a solution of BR in St is obtained. In subsequent reaction steps the unreacted styrene monomer is either polymerized radically, or acrylonitrile is added prior to radical initiation. During the subsequent radical polymerization styrene or styrene/acrylonitrile, respectively, are polymerized and ris-l,4-BR is grafted and partially crosslinked. In this way BR modified (or impact modified) thermoplast blends are obtained. In these blends BR particles are dispersed either in poly(styrene) (yielding HIPS = high impact poly(styrene) or in styrene-acrylonitrile-copolymers (yielding ABS = acrylonitrile/butadiene/ styrene-terpolymers). In comparison with the classical bulk processes for HIPS and ABS, this new technology allows for considerable cost reductions... 

ACRN is used to make acrylic fibers, acrylonitrile-butadiene-styrene (ABS), and styrene-acrylonitrile (SAN). Worldwide acrylic fiber accounts for over half of total demand while ABS and SAN consume about 30% of output. Smaller applications include nitrile rubber copolymers (4%), adiponitrile (ADN) and acrylamide. Acrylic fibers are used in carpets and clothing while ABS and SAN resins are used in pipes and fittings, automobiles, furniture, and packaging276. In the United States the ACRN uses are distributed differently 38% is used in ADN, 22% in ABS and SAN, 17% in acrylic fibers, 11% in acrylamide, 3% in nitrile elastomers, and 9% in miscellaneous, which includes polymers, polyols, barrier resins and carbon fibers277. 

Note ABS, acrylonitrile/butadiene/styrene EPS, expandable polystyrene HIPS, high-impact polystyrene PA, polyamide PBT, poly(butylene)terephthalate PC, polycarbonate PE, polyethylene PET, poly(ethylene)terephthalate PP, polypropylene PUR, polyurethane PVC, polyvinylchloride UPE, unsaturated polyester Textile, textile application. 

Thermoplastic polymers, notably acrylonitrile-butadiene-styrene and polyvinyl chloride Applications include ... 

Acrylic fibers are by far the major end use for acrylonitrile. They find use primarily in fabrics for clothing, furniture, draperies, and carpets. The second largest consumer of acrylonitrile is acrylonitrile-butadiene-styrene (ABS) and styrene acrylonitrile (SAN) resins. ABS is useful in industrial and construction applications, and the superior clarity of SAN makes it useful in plastic lenses, windows, and transparent household items. 

Another promising field of application of Th-FFF is the investigation of gel/microgel mixtures with polymers as pioneered by Lee et al. [355,356], A major advantage is that for the Th-FFF experiment no filtration is required to endanger material loss. For example, microgels or particles which are problematic for SEC separations can be separated from a polymer, so that the major constituents of composites such as acrylonitrile-butadiene-styrene (ABS) rubber are quantitatively accessible. 

Acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acry- late (ASA) are rubber-toughened plastics based upon the styrene-acrylonitrile (SAN) copolymer matrix. The combination of the stiffness and toughness exhibited by these materials has made them increasingly attractive in engineering applications, and the activity of the patent literature testifies to a continuing interest in improving properties through modifications of structure. The aim of this paper is to discuss a quantitative approach to structure-property relationships in ABS and ASA polymers. 

The primary use of TBBPA is as a flame retardant in epoxy resin circuit boards and in electronic enclosures made of polycarbonate-acrylonitrile-butadiene-styrene (PC-ABS). Other applications of TBBPA include its use as a flame retardant for plastics, paper, and textiles as a plasticizer in adhesives and coatings and as a chemical intermediate for the synthesis of other flame retardants (e.g., TBBPA allyl ether). It is also been applied to carpeting and office furniture as a flame retardant. 

The most important commercial blends of BPA-PC are poly(acrylonitrile-butadiene-styrene) (PC/ABS) and polybutylene terephthalate (PC/PBT) or polyethylene terephthalate (PET). Commercial grades of PC/ABS include CYCOLOY (GE), Bayblend (Bayer), and PULSE (Dow). PC/ABS blends exhibit improved flow and processability and enhanced low-temperature impact strength in comparison to PC (Fig. 3). These blends are widely used in applications requiring enhanced impact resistance, such as interior automotive parts and computer and electronics applications such as computer housings and cell phones. Non-halogenated flame-retardant PC/ABS blends are widely available. Poly(acrylic-styrene-acrylonitrile) (PC/ ASA) blends (GELOY , GE Luran , BASF) provide improved weatherability for outdoor applications such as exterior automotive parts, but exhibit reduced impact performance at low temperatures in comparison to PC/ABS. PC/PBT or PET blends (XENOY , GE Makroblend , Bayer) provide enhanced chemical resistance and weatherability for applications such as lawn and garden equipment and automotive bumpers and fasdas. 

---