Acids niobium

At high acidities, niobium is present as fluoroniobic acid, and this forms a solvation complex given by the reaction ... 

The strong Lewis acid niobium(V) pentachloride has been found to be an effective reagent for the monodealkylation of diethers with two alkyl-aryl linkages.128... 

Fructose, one of the most common ketohexoses, readily dehydrates to afford HMF in the presence of Br0nsted acids in polar solvents. A variety of aprotic polar solvents, including DMSO, DMF, N,N-dimethylacetamide (DMA), and sulfolane, are used for these liquid-phase reaction because of the solubility of carbohydrates. A variety of solid acids, such as ion-exchange resins [156], zeolites [157, 158], metal oxides, and heteropoly acid salts, have been examined for HMF production from fructose [159,160]. Niobic acid, niobium phosphate, vanadium phosphate, sulfated zirconia, Amberlyst-15, and acid-functionalized mesoporous silicas are also found to exhibit high catalytic activity for fructose dehydration [161-167]. Moreover, soHd acid catalysts have also been examined in ionic liquids [168-175]. 

Ammonium citrate dibasic Barium fluoride Barium nitrate Bismuth Calcium fluoride Calcium titanate Carbon Cobalt sulfate (ous) Gold Hydrogen peroxide y-Linolenic acid Niobium oxide Nitrogen Palmitoleic acid Polyester carbonate resin Selenium Sodium chlorite Strontium titanate electronics applies. 

With pyrogallol-4-sulfonic acid, tantalum forms a yellow 1 1 complex. This color reaction of tantalum is highly selective at pH 1.5 and in the presence of oxalic acid. Niobium (compare page 332) does not react with this reagent under these conditions. 

Except for hydrofluoric acid, niobium is resistant to most organic and mineral acids at all temperatures below 212°F (100°C). This includes hydrochloric, hydroiodic, hydrobromic, nitric, sulfuric, and phosphoric acids. It is especially resistant under oxidizing conditions such as concentrated sulfuric acid and ferric chloride or cupric chloride solutions. 

Gr. Tantalos, mythological character, father of Niobe) Discovered in 1802 by Ekeberg, but many chemists thought niobium and tantalum were identical elements until Rowe in 1844, and Marignac, in 1866, showed that niobic and tantalic acids were two different acids. The early investigators only isolated the impure metal. The first relatively pure ductile tantalum was produced by von Bolton in 1903. Tantalum occurs principally in the mineral columbite-tantalite. 

Perchloric acid (HCIO4 Ho —13.0), fluorosulfuric acid (HSO3F Ho — 15.1), and trifluoromethanesulfonic acid (CF3SO3H Ho —14.1) are considered to be superacids, as is truly anhydrous hydrogen fluoride. Complexing with Lewis acidic metal fluorides of higher valence, such as antimony, tantalum, or niobium pentafluoride, greatly enhances the acidity of all these acids. 

In a generalized sense, acids are electron pair acceptors. They include both protic (Bronsted) acids and Lewis acids such as AlCb and BF3 that have an electron-deficient central metal atom. Consequently, there is a priori no difference between Bronsted (protic) and Lewis acids. In extending the concept of superacidity to Lewis acid halides, those stronger than anhydrous aluminum chloride (the most commonly used Friedel-Crafts acid) are considered super Lewis acids. These superacidic Lewis acids include such higher-valence fluorides as antimony, arsenic, tantalum, niobium, and bismuth pentafluorides. Superacidity encompasses both very strong Bronsted and Lewis acids and their conjugate acid systems. 

Because of the small size of the fluoride ion, F participates in coordination stmctures of high rank. Tantalum and niobium form stable hexafluorotantalate and hexafluoroniobate ions and hydrogen fluoride attacks these usually acid-resistant metals. Hydrogen fluoride in water is a weak acid. Two dissociation constants are... 

Opa.nte. There are two methods used at various plants in Russia for loparite concentrate processing (12). The chlorination technique is carried out using gaseous chlorine at 800°C in the presence of carbon. The volatile chlorides are then separated from the calcium—sodium—rare-earth fused chloride, and the resultant cake dissolved in water. Alternatively, sulfuric acid digestion may be carried out using 85% sulfuric acid at 150—200°C in the presence of ammonium sulfate. The ensuing product is leached with water, while the double sulfates of the rare earths remain in the residue. The titanium, tantalum, and niobium sulfates transfer into the solution. The residue is converted to rare-earth carbonate, and then dissolved into nitric acid. 

The most common oxidation state of niobium is +5, although many anhydrous compounds have been made with lower oxidation states, notably +4 and +3, and Nb can be reduced in aqueous solution to Nb by zinc. The aqueous chemistry primarily involves halo- and organic acid anionic complexes. Virtually no cationic chemistry exists because of the irreversible hydrolysis of the cation in dilute solutions. Metal—metal bonding is common. Extensive polymeric anions form. Niobium resembles tantalum and titanium in its chemistry, and separation from these elements is difficult. In the soHd state, niobium has the same atomic radius as tantalum and essentially the same ionic radius as well, ie, Nb Ta = 68 pm. This is the same size as Ti ... 

Direct attack by hot 70—80 wt % hydrofluoric acid, sometimes with nitric acid (qv), is effective for processiag columbites and tantalo-columbites. Yields are >90 wt%. This method, used in the first commercial separation of tantalum and niobium, is used commercially as a lead-in to solvent extraction procedures. The method is not suited to direct processiag of pyrochlores because of the large alkaU and alkaline-earth oxide content therein, ie, ca 30 wt %, and the corresponding high consumption of acid. 

Concentrated sulfuric acid (97 wt %) at 300—400°C has been used to solubili2e niobium from columbite and pyrochlore (18,19). The exothermic reaction is performed in iron or siUcon-iron cmcibles to yield a stable sulfato complex. The complex is filtered free of residue and is hydroly2ed by dilution with water and boiling to yield niobic acid which is removed by filtration as a white coUoidal precipitate. 

The reaction of finely ground ores and an excess of carbon at high temperatures produces a mixture of metal carbides. The reaction of pyrochlore and carbon starts at 950°C and proceeds vigorously. After being heated to 1800—2000°C, the cooled friable mixture is acid-leached leaving an insoluble residue of carbides of niobium, tantalum, and titanium. These may be dissolved in HF or may be chlorinated or burned to oxides for further processing. 

Another solvent extraction scheme uses the mixed anhydrous chlorides from a chlorination process as the feed (28). The chlorides, which are mostly of niobium, tantalum, and iron, are dissolved in an organic phase and are extracted with 12 Ai hydrochloric acid. The best separation occurs from a mixture of MIBK and diisobutyl ketone (DIBK). The tantalum transfers to the hydrochloric acid leaving the niobium and iron, the DIBK enhancing the separation factor in the organic phase. Niobium and iron are stripped with hot 14—20 wt % H2SO4 which is boiled to precipitate niobic acid, leaving the iron in solution. 

A process has been developed to recover niobium from ferroniobium (30). The need for this process came about when Brazil would only export niobium in the form of ferroniobium. The process starts with a hydriding step, so as to be able to cmsh the alloy. Screening precedes a nitriding step, followed by an acid leach of the iron nitrides. This leaves the niobium nitride for further processing to the pure niobium metal. 

Solvent extraction techniques are useful in the quantitative analysis of niobium. The fluoro complexes are amenable to extraction by a wide variety of ketones. Some of the water-insoluble complexes with organic precipitants are extractable by organic solvents and colorimetry is performed on the extract. An example is the extraction of the niobium—oxine complex with chloroform (41). The extraction of the niobium—pyrocatechol violet complex with tridodecylethylammonium bromide and the extraction of niobium—pyrocatechol—sparteine complex with chloroform are examples of extractions of water-soluble complexes. Colorimetry is performed on the extract (42,43). Colorimetry may also be performed directly on the water-soluble complex, eg, using ascorbic acid and 5-nitrosahcyhc acid (44,45). 

Niobium Penta.fIuoride, Niobium pentafluoride is prepared best by direct fluorination of the metal with either fluorine or anhydrous hydrofluoric acid at 250—300°C. The volatile NbF is condensed in a pyrex or quartz cold trap, from which it can be vacuum-sublimed at 120°C to yield colorless monoclinic crystals. It is very hygroscopic and reacts vigorously with water to give a clear solution of hydrofluoric acid and H2NbOF ... 

Niobium Dioxide Fluoride. Niobium dioxide fluoride, Nb02F, is formed on dissolution of niobium pentoxide in 48 wt % aqueous hydrofluoric acid, evaporation of the solution to dryness, and heating to 250°C. 

Niobium Pent chloride. Niobium pentachloride can be prepared in a variety of ways but most easily by direct chlorination of niobium metal. The reaction takes place at 300—350°C. Chlorination of a niobium pentoxide—carbon mixture also yields the pentachloride however, generally the latter is contaminated with niobium oxide trichloride. The pentachloride is a lemon-yeUow crystalline soHd that melts to a red-orange Hquid and hydrolyzes readily to hydrochloric acid and niobic acid. It is soluble in concentrated hydrochloric and sulfuric acids, sulfur monochloride, and many organic solvents. 

Niobic Acid. Niobic acid, Nb20 XH2O, includes all hydrated forms of niobium pentoxide, where the degree of hydration depends on the method of preparation, age, etc. It is a white insoluble precipitate formed by acid hydrolysis of niobates that are prepared by alkaH pyrosulfate, carbonate, or hydroxide fusion base hydrolysis of niobium fluoride solutions or aqueous hydrolysis of chlorides or bromides. When it is formed in the presence of tannin, a volurninous red complex forms. Freshly precipitated niobic acid usually is coUoidal and is peptized by water washing, thus it is difficult to free from traces of electrolyte. Its properties vary with age and reactivity is noticeably diminished on standing for even a few days. It is soluble in concentrated hydrochloric and sulfuric acids but is reprecipitated on dilution and boiling and can be complexed when it is freshly made with oxaHc or tartaric acid. It is soluble in hydrofluoric acid of any concentration. 

Arsonium salts have found considerable use in analytical chemistry. One such use involves the extraction of a metal complex in aqueous solution with tetraphenyiarsonium chloride in an organic solvent. Titanium(IV) thiocyanate [35787-79-2] (157) and copper(II) thiocyanate [15192-76-4] (158) in hydrochloric acid solution have been extracted using tetraphenyiarsonium chloride in chloroform solution in this manner, and the Ti(IV) and Cu(II) thiocyanates deterrnined spectrophotometricaHy. Cobalt, palladium, tungsten, niobium, and molybdenum have been deterrnined in a similar manner. In addition to their use for the deterrnination of metals, anions such as perchlorate and perrhenate have been deterrnined as arsonium salts. Tetraphenyiarsonium permanganate is the only known insoluble salt of this anion. 

---