Hydrochloric concentrated

Andrews deration An important titration for the estimation of reducing agents. The reducing agent is dissolved In concentrated hydrochloric acid and titrated with potassium iodale(V) solution. A drop of carbon tetrachloride is added to the solution and the end point is indicated by the disappearance of the iodine colour from this layer. The reducing agent is oxidized and the iodate reduced to ICl, i.e. a 4-eiectron change. 

CH2CI-CO-CH3. Colourless lachrymatory liquid b.p. 119°C. Manufactured by treating propanone with bleaching powder or chlorine. It is used as a tear gas and is usually mixed with the more potent bromoacetone. chloro acids Complex chloroanions are formed by most elements of the periodic table by solution of oxides or chlorides in concentrated hydrochloric acid. Potassium salts are precipitated from solution when potassium chloride is added to a solution of the chloro acid, the free acids are generally unstable. 

Molisch s test A general test for carbohydrates. The carbohydrate is dissolved in water, alcoholic 1-naphthol added, and concentrated sulphuric acid poured down the side of the tube. A deep violet ring is formed at the junction of the liquids. A modification, the rapid furfural test , is used to distinguish between glucose and fructose. A mixture of the sugar, 1-naphthol, and concentrated hydrochloric acid is boiled. With fructose and saccharides containing fructose a violet colour is produced immediately the solution boils. With glucose the appearance of the colour is slower. 

Thus under standard conditions chloride ions are not oxidised to chlorine by dichromate(Vr) ions. However, it is necessary to emphasise that changes in the concentration of the dichromate(VI) and chloride ions alters their redox potentials as indicated by the Nernst equation. Hence, when concentrated hydrochloric acid is added to solid potassium dichromate and the mixture warmed, chlorine is liberated. 

Amorphous carbon, having a far greater effective surface area than either diamond or graphite, is the most reactive form of carbon. It reacts with both hot concentrated sulphuric and hot concentrated nitric acids in the absence of additional oxidising agents but is not attacked by hydrochloric acid. 

Tin slowly dissolves in dilute hydrochloric, nitric and sulphuric acids, and is in fact the only Group IV element to do so. The reactions with more concentrated acid are rapid. With hydrochloric acid. 

Lead reacts only briefly with dilute hydrochloric and sulphuric acids for both lead(Il) chloride and lead(Il) sulphate are insoluble and form a film on the lead which effectively prevents further attack. Lead, however, does slowly dissolve in both concentrated sulphuric and hydrochloric acids. The sulphuric acid is reduced to sulphur dioxide ... 

Lead reacts slowly with hot concentrated hydrochloric acid since the lead II) chloride dissolves in an excess of the hot hydrochloric acid to form the acid H,[Pb"CI ] ... 

Lead(IV) oxide is found to have a considerable oxidising power, again indicating that the oxidation state +2 is generally more stable for lead than oxidation state +4. Concentrated hydrochloric acid, for example, reacts with PbO at room temperature to form lead(II) chloride and chlorine ... 

In concentrated hydrochloric acid solution, the reaction is GeCl -p Cr [GeClj]-and salts of this anion are known. 

It has a covalently bonded structure and is a colourless liquid at room temperature it is hydrolysed reversibly by water, all the germanium being recoverable by distilling the product with concentrated hydrochloric acid GeCl -P 2H2O — Ge02 -P 4HC1... 

This chloride is prepared by dissolving tin in concentrated hydrochloric acid on cooling, the solution deposits crystals of hydrated tin(II) chloride. SnClj. 2H2O ("tin salt ). The anhydrous chloride is prepared by heating tin in a current of hydrogen chloride ... 

The solid is essentially ionic, made up of Pb and Cl ions. The vapour contains bent molecules of PbCh (cf. SnCh). Lead chloride is precipitated when hydrochloric acid (or a solution of a chloride) is added to a cold solution of a lead(ll) salt. It dissolves in hot water but on cooling, is slowly precipitated in crystalline form. It dissolves in excess of concentrated hydrochloric acid to give the acid H2[Pb"Cl4]. 

Lead(IV) chloride is formed from cold concentrated hydrochloric acid and lead(IV) oxide as described earlier. It readily evolves chlorine by the reversible reaction ... 

Antimony forms both a + 3 and a + 5 oxide. The + 3 oxide can be prepared by the direct combination of the elements or by the action of moderately concentrated nitric acid on antimony. It is an amphoteric oxide dissolving in alkalis to give antimonates(III) (for example sodium antimonite , NaSb02), and in some acids to form salts, for example with concentrated hydrochloric acid the trichloride, SbCl3, is formed. 

Hence addition of concentrated hydrochloric acid to a solution of arsenic(III) acid produces arsenic(IIl) chloride in solution. The above equilibrium may be written ... 

The more metallic nature of polonium is shown by the fact that it dissolves not only in concentrated nitric and sulphuric acids but also in hydrofluoric and hydrochloric acids. 

The gas is washed with water to remove any hydrogen chloride. Since iron(II) sulphide is a non-stoichiometric compound and always contains some free iron, the hydrogen sulphide always contains some hydrogen, liberated by the action of the iron on the acid. A sample of hydrogen sulphide of better purity can be obtained if antimony(III) sulphide, (stibnite) SbjSj, is warmed with concentrated hydrochloric acid ... 

Hydrochloric acid is a strong monobasic acid, dissolving metals to form salt and evolving hydrogen. The reaction may be slow if the chloride formed is insoluble (for example lead and silver are attacked very slowly). The rate of attack on a metal also depends on concentration thus aluminium is attacked most rapidly by 9 M hydrochloric acid, while with other metals such as zinc or iron, more dilute acid is best. 

Electrolysis of hydrochloric acid yields hydrogen at the cathode and oxygen at the anode from the dilute acid, but chlorine at the anode (of carbon) from the concentrated acid. Electrolysis of the concentrated acid is used on the large scale to recover chlorine. 

Halogens can act as ligands and are commonly found in complex ions the ability of fluorine to form stable complex ions with elements in high oxidation states has already been discussed (p. 316). However, the chlorides of silver, lead(Il) and mercury(l) are worthy of note. These chlorides are insoluble in water and used as a test for the metal, but all dissolve in concentrated hydrochloric acid when the complex chlorides are produced, i.e. [AgCl2] , [PbC ] and [Hg Clj]", in the latter case the mercury(I) chloride having also disproportionated. 

Iodine monochloride, formed when iodine reacts with the iodate(V) ion in the presence of an excess of concentrated hydrochloric acid. 

Manganese(IV) oxide is a dark-brown solid, insoluble in water and dilute acids. Its catalytic decomposition of potassium chlor-ate(V) and hydrogen peroxide has already been mentioned. It dissolves slowly in alkalis to form manganates(lW), but the constitution of these is uncertain. It dissolves in ice-cold concentrated hydrochloric acid forming the complex octahedral hexachloromangan-ate(IV) ion ... 

Hence, under ordinary conditions, manganeseflV) oxide oxidises concentrated hydrochloric acid to chlorine, but the above shows that the oxidation process is essentially ... 

Alternatively, a known weight of the pyrolusite may be heated with concentrated hydrochloric acid and the chlorine evolved passed into potassium iodide solution. The iodine liberated is titrated with sodium thiosulphate ... 

For this reaction, charcoal is a catalyst if this is omitted and hydrogen peroxide is used as the oxidant, a red aquopentammino-cobalt(lll) chloride, [Co(NH3)jH20]Cl3, is formed and treatment of this with concentrated hydrochloric acid gives the red chloro-p0itatnmino-coba. t(lll) chloride, [Co(NH3)5Cl]Cl2. In these latter two compounds, one ammonia ligand is replaced by one water molecule or one chloride ion it is a peculiarity of cobalt that these replacements are so easy and the pure products so readily isolated. In the examples quoted, the complex cobalt(III) state is easily obtained by oxidation of cobalt(II) in presence of ammonia, since... 

The anhydrous chloride is prepared by standard methods. It is readily soluble in water to give a blue-green solution from which the blue hydrated salt CuClj. 2H2O can be crystallised here, two water molecules replace two of the planar chlorine ligands in the structure given above. Addition of dilute hydrochloric acid to copper(II) hydroxide or carbonate also gives a blue-green solution of the chloride CuClj but addition of concentrated hydrochloric acid (or any source of chloride ion) produces a yellow solution due to formation of chloro-copper(ll) complexes (see below). 

By warming either copper(I) oxide or a mixture of copper(II) chloride and copper with concentrated hydrochloric acid, until a deep brown solution is formed ... 

The solid readily dissolves chemically in concentrated hydrochloric acid, forming a complex, and in ammonia as the colourless, linear, complex cation [H3N -> Cu <- NHj] (cf AgCl) if air is absent (in the presence of air, this is oxidis to a blue ammino-copper(II) complex). This solution of ammoniacal copper(I) chloride is a good solvent or carbon monoxide, forming an addition compound CuCl. CO. H2O, and as such is used in gas analysis. On passing ethyne through the ammoniacal solution, a red-brown precipitate of hydrated copper(I) dicarbide (explosive when dry) is obtained ... 

Anhydrous cupric sulphate is white but forms a blue hydrate and a blue aqueous solution. The solution turns yellow when treated with concentrated hydrochloric acid, dark blue with ammonia, and gives a white precipitate and brown solution when treated with potassium iodide. A yellow-brown aqueous solution of ferric chloride becomes paler on acidification with sulphuric or nitric... 

When cobalt(II) chloride was dissolved in water, a pink solution A was formed. The addition of concentrated hydrochloric acid to A gave a blue solution B. If solution A was treated with concentrated ammonia solution a blue-green precipitate was formed upon addition of further ammonia solution followed by the passage of air through the mixture, an orange-red solution C was produced. 

Silver chloride is reduced to the metal by zinc. One of the methods of recovering silver from silver residues depends on this. The residue is first treated with concentrated hydrochloric acid and then sulphuric acid and zinc added ... 

It is dissolved by aqua regia (a mixture of concentrated hydrochloric and nitric acids). The product here is chlorauricil 11) acid, HAUCI4 in the complex chloraurate ion [AuClJ gold is in oxidation state + 3, auric gold. ... 

Hydrolysis of Potassium Ethyl Sulphate. Dissolve about i g. of the crystals in about 4 ml. of cold distilled water, and divide the solution into two portions, a) To one portion, add barium chloride solution. If pure potassium ethyl sulphate were used, no precipitate should now form, as barium ethyl sulphate is soluble in water. Actually however, almost all samples of potassium ethyl sulphate contain traces of potassium hydrogen sulphate formed by slight hydrolysis of the ethyl compound during the evaporation of its solution, and barium chloride almost invariably gives a faint precipitate of barium sulphate. b) To the second portion, add 2-3 drops of concentrated hydrochloric acid, and boil the mixture gently for about one minute. Cool, add distilled water if necessary until the solution has its former volume, and then add barium chloride as before. A markedly heavier precipitate of barium sulphate separates. The hydrolysis of the potassium ethyl sulphate is hastened considerably by the presence of the free acid Caustic alkalis have a similar, but not quite so rapid an effect. 

Place I g. of benzamide and 15 ml. of 10% aqueous sodium hydroxide solution in a 100 ml. conical flask fitted with a reflux water-condenser, and boil the mixture gently for 30 minutes, during which period ammonia is freely evolved. Now cool the solution in ice-water, and add concentrated hydrochloric acid until the mixture is strongly acid. Benzoic acid immediately separates. Allow the mixture to stand in the ice-water for a few minutes, and then filter off the benzoic add at the pump, wash with cold water, and drain. Recrystallise from hot water. The benzoic acid is obtained as colourless crystals, m.p. 121°, almost insoluble in cold water yield, o 8 g. (almost theoretical). Confirm the identity of the benzoic acid by the tests given on p. 347. 

---