Vinyl ethers, substitution reactions

A third mechanistically distinct [3 -1- 2] cycloaddition between vinyl ethers and vinyl-carbenoids was discovered and reported in 2001 [26]. This reaction is remarkable because when Rh2(S-DOSP)4 is used as the catalyst, the cis-cyclopentenes 142 are formed in up to 99% enantiomeric excess. The reaction occurs between vinylcarbenoids unsubstituted or alkyl-substituted at the vinyl terminus and vinyl ethers substituted with an aryl or vinyl group. Some illustrative examples are shown in Tab. 14.12. The reaction is considered to be a concerted process, which would be consistent with the highly stereoselective nature of the reaction [26]. Contrary to the [3-1-2] cycloaddition derived by means of vinylogous carbenoid reactivity, this latest [3 -1- 2] cycloaddition is not influenced by solvent effects. Due to steric demands on the carbenoid, the [3-1-2] cycloaddi-tion only occurs with cis-vinyl ethers. 

Danishefsky and co-workers exploited a 6-exo intramolecular vinylic Heck substitution reaction en route to a total synthesis of ( )-FR-900482 (76) (Scheme 6-12) [26]. The efficient conversion of aryl iodide 70 to tetracycle 71 is illustrative of the impressive functional-group tolerance displayed by the Heck reaction. During the development of this synthesis, attempts were made to introduce the oxygenation present at C —13 at an earlier stage [27]. Enol ethers 72 and 74 were prepared and subjected to Heck conditions. 

Although vinyl ether substitution generally accelerates the [4 + 2] cycloaddition, certain trisubstituted vinyl ethers decelerate the following [3 + 2] step electronically. Thus, in several reactions the disappearance of the starting... 

In early work, vinyl chloride had been heated with stoichiometric amounts of alkaU alkoxides in excess alcohol as solvent, giving vinyl ethers as products (210). Supposedly this involved a Williamson ether synthesis, where alkaU alkoxide and organic haUde gave an ether and alkaU haUde. However, it was observed that small amounts of acetylene were formed by dehydrohalogenation of vinyl chloride, and that this acetylene was consumed as the reaction proceeded. Hence acetylene was substituted for vinyl chloride and only catalytic amounts of alkaU were used. Vinylation proceeded readily with high yields (211). 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

The high reactivity of pyrroles to electrophiles is similar to that of arylamines and is a reflection of the mesomeric release of electrons from nitrogen to ring carbons. Reactions with electrophilic reagents may result in addition rather than substitution. Thus furan reacts with acetyl nitrate to give a 2,5-adduct (33) and in a similar fashion an adduct (34) is obtained from the reaction of ethyl vinyl ether with hydrogen bromide. 

More recently, further developments have shown that the reaction outlined in Scheme 4.33 can also proceed for other alkenes, such as silyl-enol ethers of acetophenone [48 b], which gives the endo diastereomer in up to 99% ee. It was also shown that / -ethyl-/ -methyl-substituted acyl phosphonate also can undergo a dia-stereo- and enantioselective cycloaddition reaction with ethyl vinyl ether catalyzed by the chiral Ph-BOX-copper(ll) catalyst. The preparative use of the cycloaddition reaction was demonstrated by performing reactions on the gram scale and showing that no special measures are required for the reaction and that the dihydro-pyrans can be obtained in high yield and with very high diastereo- and enantioselective excess. 

In an analogous study by Meske, the impact of various oxazaborolidinone catalysts for the 1,3-dipolar cycloaddition reactions between acyclic nitrones and vinyl ethers was studied [31]. Both the diastereo- and the enantioselectivities obtained in this work were low. The highest enantioselectivity was obtained by the application of 100 mol% of the tert-butyl-substituted oxazaborolidinone catalyst 3d [27, 32] in the 1,3-dipolar cycloaddition reaction between nitrone la and ethyl vinyl ether 8a giving endo-9a and exo-9a in 42% and 27% isolated yield, respectively, with up to 20% ee for endo-9a as the best result (Scheme 6.10). 

The above described reaction has been extended to the application of the AlMe-BINOL catalyst to reactions of acyclic nitrones. A series chiral AlMe-3,3 -diaryl-BINOL complexes llb-f was investigated as catalysts for the 1,3-dipolar cycloaddition reaction between the cyclic nitrone 14a and ethyl vinyl ether 8a [34], Surprisingly, these catalysts were not sufficiently selective for the reactions of cyclic nitrones with ethyl vinyl ether. Use of the tetramethoxy-substituted derivative llg as the catalyst for the reaction significantly improved the results (Scheme 6.14). In the presence of 10 mol% llg the reaction proceeded in a mixture of CH2CI2 and petroleum ether to give the product 15a in 79% isolated yield. The diastereoselectiv-ity was the same as in the acyclic case giving an excellent ratio of exo-15a and endo-15a of >95 <5, and exo-15a was obtained with up to 82% ee. 

Intermolecular befera-Diels-Alder reactions of enamino ketones with highly substituted vinyl ethers. Effect of high pressure on the kinetics and diastereoselectivity [77]... 

Microwave-assisted Heck reaction of (hetero)aryl bromides with N,N-dimethyl-2-[(2-phenylvinyl)oxy]ethanamine, using Herrmann s palladacycle as a precatalyst, yielded the corresponding /3-(hetero)arylated Heck products in a good EjZ selectivity (Scheme 79) [90]. The a/yd-regioselectivity can be explained by the chelation control in the insertion step. This selectivity is better than 10/90 when no severe steric hindrance is introduced in the (hetero)aryl bromides. The process does not require an inert atmosphere. There is evidence that a Pd(0)/Pd(II)- and not Pd(II)/Pd(IV)-based catalytic cycle is involved. Similarly, other j6-amino-substituted vinyl ethers such as... 

Another important type of reactivity of palladium, namely oxidative addition to Pd(0), is the foundation for several methods of forming carbon-carbon bonds. Aryl126 and alkenyl127 halides react with alkenes in the presence of catalytic amounts of palladium to give net substitution of the halide by the alkenyl group. The reaction, known as the Heck reaction,128 is quite general and has been observed for simple alkenes, aryl-substituted alkenes, and substituted alkenes such as acrylate esters, vinyl ethers, and A-vinylamides.129... 

The reactivity of the prototype o-QM as heterodiene in Diels-Alder cycloaddition reactions with several substituted alkenes such as methyl vinyl ether (MVE), styrene,... 

The preparation of resin-bound nitroalkenes via a microwave-assisted Knoevenagel reaction of resin-bound nitroacetic acid with aryl and alkyl substituted aldehydes is reported. The potential of these resin-bound nitroalkenes for application in combinatorial chemistry is demonstrated by a Diels-Alder reaction with 2,3-dimethylbutadiene (Scheme 8.9). It is also used for one-pot three-component tandem [4+2]/[3+2] reactions with ethyl vinyl ether and styrene 46... 

Some remarks concerning the scope of the cobalt chelate catalysts 207 seem appropriate. Terminal double bonds in conjugation with vinyl, aryl and alkoxy-carbonyl groups are cyclopropanated selectively. No such reaction occurs with alkyl-substituted and cyclic olefins, cyclic and sterically hindered acyclic 1,3-dienes, vinyl ethers, allenes and phenylacetylene95). The cyclopropanation of electron-poor alkenes such as acrylonitrile and ethyl acrylate (optical yield in the presence of 207a r 33%) with ethyl diazoacetate deserve notice, as these components usually... 

Examples of the behavior of other substituted vinyl substrates upon exposure to the action of trifluoroacetic acid and triethylsilane are known. For example, -butyl vinyl ether, when reacted at 50° for 10 hours, gives -butyl ethyl ether in 80% yield (Eq. 65).234 In contrast, -butyl vinyl thioether gives only a 5% yield of n-butyl ethyl sulfide product after 2 hours and 15% after 20 horns of reaction.234 It is suggested that this low reactvity is the result of the formation of a very stable sulfur-bridged carbocation intermediate that resists attack by the organosilicon hydride (Eq. 66). 

The most characteristic and useful reaction is the dimerization with incorporation of certain nucleophiles. It is well-known that simple olefins coordinated by Pd2+ compounds undergo nucleophilic substitutions [Eq. (9)] or addition reactions [Eq. (10)] (16, 17). Water, alcohols, and carboxylic acids are typical nucleophiles which attack olefins to form aldehydes, ketones, vinyl ethers, and vinyl esters. 

Ferreira developed a novel method for the preparation of masked 1,4-dicarbonyl derivatives for utilization in the Paal-Knorr synthesis of pyrroles <00SC3215>. In this process, the reaction between diazocompound 3 and n-butyl vinyl ether using dirhodium tetraacetate as catalyst provides dihydrofurans 4 which are easily converted into substituted... 

A common method to synthesize pyridazines remains the inverse electron-demand Diels-Alder cycloaddition of 1,2,4,5-tetrazines with electron rich dienophiles. [4 + 2]-Cycloadditions of disubstituted 1,2,4,5-tetrazine 152 with butyl vinyl ether, acrylamide, phenylacetylene, and some enamines were performed to obtain fully substituted pyridazines 153 . This reaction was accelerated by electron withdrawing groups, and is slowed by electron donating groups, R1 and R2on the tetrazine. 

However, most asymmetric 1,3-dipolar cycloaddition reactions of nitrile oxides with alkenes are carried out without Lewis acids as catalysts using either chiral alkenes or chiral auxiliary compounds (with achiral alkenes). Diverse chiral alkenes are in use, such as camphor-derived chiral N-acryloylhydrazide (195), C2-symmetric l,3-diacryloyl-2,2-dimethyl-4,5-diphenylimidazolidine, chiral 3-acryloyl-2,2-dimethyl-4-phenyloxazolidine (196, 197), sugar-based ethenyl ethers (198), acrylic esters (199, 200), C-bonded vinyl-substituted sugar (201), chirally modified vinylboronic ester derived from D-( + )-mannitol (202), (l/ )-menthyl vinyl ether (203), chiral derivatives of vinylacetic acid (204), ( )-l-ethoxy-3-fluoroalkyl-3-hydroxy-4-(4-methylphenylsulfinyl)but-1 -enes (205), enantiopure Y-oxygenated-a,P-unsaturated phenyl sulfones (206), chiral (a-oxyallyl)silanes (207), and (S )-but-3-ene-1,2-diol derivatives (208). As a chiral auxiliary, diisopropyl (i ,i )-tartrate (209, 210) has been very popular. 

A related Heck reaction of substituted o-bromoacetanilides with styrenes followed by selenium-induced cyclization of the resulting o-styiylacetanilides gives 2-arylindoles [378], Substituted o-bromonitrobenzenes react with ethyl vinyl ether under the influence of Pd(OAc)2 to give the corresponding o-ethoxyethenylnitrobenzenes. Zinc reduction then yields indoles [379]. The one-step Pd-catalyzed conversion of o-bromoanilines to indoles 302 with enamines (or with A/-vinyl-2-pyrrolidone) has been reported [380]. 

The nucleophilic addition of alcohols [130, 204-207], phenols [130], carboxylates [208], ammonia [130, 209], primary and secondary amines [41, 130, 205, 210, 211] and thiols [211-213] was used very early to convert several acceptor-substituted allenes 155 to products of type 158 and 159 (Scheme 7.25, Nu = OR, OAr, 02CR, NH2, NHR, NRR and SR). While the addition of alcohols, phenols and thiols is generally carried out in the presence of an auxiliary base, the reaction of allenyl ketones to give vinyl ethers of type 159 (Nu = OMe) is successful also by irradiation in pure methanol [214], Using widely varying reaction conditions, the addition of hydrogen halides (Nu= Cl, Br, I) to the allenes 155 leads to reaction products of type 158 [130, 215-220], Therefore, this transformation was also classified as a nucleophilic addition. Finally, the nucleophiles hydride (such as lithium aluminum hydride-aluminum trichloride) [211] and azide [221] could also be added to allenic esters to yield products of type 159. 

The attack of the nucleophile on the acceptor-substituted allene usually happens at the central sp-hybridized carbon atom. This holds true also if no nucleophilic addition but a nucleophilic substitution in terms of an SN2 reaction such as 181 — 182 occurs (Scheme 7.30) [245]. The addition of ethanol to the allene 183 is an exception [157]. In this case, the allene not only bears an acceptor but shows also the substructure of a vinyl ether. A change in the regioselectivity of the addition of nucleophilic compounds NuH to allenic esters can be effected by temporary introduction of a triphenylphosphonium group [246]. For instance, the ester 185 yields the phos-phonium salt 186, which may be converted further to the ether 187. Evidently, the triphenylphosphonium group induces an electrophilic character at the terminal carbon atom of 186 and this is used to produce 187, which is formally an abnormal product of the addition of methanol to the allene 185. This method of umpolung is also applicable to nucleophilic addition reactions to allenyl ketones in a modified procedure [246, 247]. 

An example of the first type of study is the cationic pol erization of alkenes and heterocyclic monomers in the presence of 2-alWlfurans. As discussed above, electrophilic substitution at C5 is quite facile with these compounds and one can therefore prepare monofunctional oligomers bearing a furanic end-group. By a judicious choice of experimental conditions this transfer reaction will predominate over all other chain-breaking events and virtually all the chains will have the same terminal structure, i.e. a 5-oligomer-2-al lfuran. Structure 32 illustrates this principle with isobutyl vinyl ether oligomers capped by 2-methylfuran ... 

Vinyl ether radical-cations also react in a radical substitution fashion with an adjacent electron rich benzene ring [59]. However the reaction products from simple examples such as 33 themselves readily undergo a further anodic oxidation... 

---