Thioethers, vinyl

Deall lation. Chloroformates such as vinyl chloroformates (40) are used to dealkylate tertiary amines. Chloroformates are superior to the typical Von Braun reagent, cyanogen bromide, because of increased selectivity producing cleaner products. Other chloroformates such as aHyl, methyl, phenyl, and trichloroethyl have also been used in dealkylation reactions. Although the dealkylation reaction using chloroformates is mostiy carried out on tertiary amines, dealkylation of oxygen or sulfur centers, ie, ethers or thioethers, can also be achieved. a-Chloroethyl chloroformate [50893-53-3] (ACE-Cl) (41,42) is superior to all previously used chloroformates for the dealkylation reaction. ACE-Cl has the advantage that the conditions requked for ACE... 

Typical of these materials are the poly(vinyl thioethers), the poly(vinyl isocyanates), the poly(vinyl ureas) and the poly(alkyl vinyl ketones). Methyl isopropenyl ketone and certain vinylpyridine derivatives have been copolymerised with butadiene to give special purpose rubbers. 

When thiols are added to substrates susceptible to nucleophilic attack, bases catalyze the reaction and the mechanism is nucleophilic. These substrates may be of the Michael type or may be polyhalo alkenes or alkynes. As with the free-radical mechanism, alkynes can give either vinylic thioethers or dithioacetals ... 

Thiols add to alkenes under photochemical conditions to form thioethers, and the reaction can be done intramolecularly to give cyclic thioethers. Thiols also add to alkynes and with a palladium catalyst, vinyl sulfides can be formed. " Selenium compounds (RSeH) add in a similar manner. ... 

Ether groups, including vinyl ethers, allylic ethers, and thioethers are also compatible. 

The earliest evidence for vinyl cations as intermediates comes from thorough studies by Jacobs and co-workers and Drenth and co-workers of the acid catalyzed hydration of alkynyl ethers (3-7) and thioethers (8-10). In particular, the hydration of the following compounds has been investigated ... 

Clearly, a large body of diverse evidence indicates that the acid-catalyzed hydration of alkynyl ethers and thioethers proceeds via a rate-determining protonation through a vinyl cation. However, these vinyl cations are unique in that they have a resonance form where the positive charge resides on the... 

Once again, a large amount of diverse evidence indicates the intermediacy of a vinyl cation in electrophilic additions to arylacetylenes. As in the case of the hydration of alkynyl ethers and thioethers, the vinyl cation formed is especially stable because of resonance interaction and charge delocalization with the adjacent rr center of the aromatic system. 

Catalytic hydrogenation with platinum liberates the hydrocarbon from methylcobalamin (57) and from alkyl-Co-DMG complexes (161), but not from pentacyanides with primary alkyl, vinyl, or benzyl ligands, though the cr-allyl complex yields propylene (109). Sodium sand gives mixtures of hydrocarbons with the alkyl-Co-salen complexes (64). Dithioerythritol will liberate methane from a variety of methyl complexes [cobalamin, DMG, DMG-BF2, G, DPG, CHD, salen, and (DO)(DOH)pn] (156), as will 1,4-butanedithiol from the DMG complex (157), and certain unspecified thiols will reduce DMG complexes with substituted alkyl ligands (e.g., C0-CH2COOH ->CH3C00H) (163, 164). Reaction with thiols can also lead to the formation of thioethers (see Section C,3). 

The hydrothiolation of terminal alkyl alkynes with 96 (Fig. 2.17) proceeds with good degree of regio- and chemo-selectivity, especially with thiophenol and p-methoxy-thiophenol as substrates. Isomerisation to the internal alkenyl thiolates accounts for less than 9% of the thiolated products under the reaction conditions. In addition, further hydrothiolation of the vinyl thioether product is not observed. Typical conversions of 70-85% at 1 mol% loading at 80°C within 5 h are observed. Arylthiols substituted with electron-withdrawing groups afford lower conversions. 

A recently developed application of the Ramberg-Backlund reaction is the synthesis of C-glycosides. The required thioethers can be prepared easily by exchange with a thiol. The application of the Ramberg-Backlund conditions then leads to an exocyclic vinyl ether that can be reduced to the C-nucleoside.95 Entries 3 and 4 in Scheme 10.6 are examples. The vinyl ether group can also be transformed in other ways. In the synthesis of partial structures of the antibiotic altromycin, the vinyl ether product was subjected to diastereoselective hydroboration. 

In Entry 5, the carbanion-stabilizing ability of the sulfonyl group enables lithiation and is then reductively removed after alkylation. The reagent in Entry 6 is prepared by dilithiation of allyl hydrosulfide using n-bulyl lithium. After nucleophilic addition and S-alkylation, a masked aldehyde is present in the form of a vinyl thioether. Entry 7 uses the epoxidation of a vinyl silane to form a 7-hydroxy aldehyde masked as a cyclic acetal. Entries 8 and 9 use nucleophilic cuprate reagents to introduce alkyl groups containing aldehydes masked as acetals. 

Examples of the behavior of other substituted vinyl substrates upon exposure to the action of trifluoroacetic acid and triethylsilane are known. For example, -butyl vinyl ether, when reacted at 50° for 10 hours, gives -butyl ethyl ether in 80% yield (Eq. 65).234 In contrast, -butyl vinyl thioether gives only a 5% yield of n-butyl ethyl sulfide product after 2 hours and 15% after 20 horns of reaction.234 It is suggested that this low reactvity is the result of the formation of a very stable sulfur-bridged carbocation intermediate that resists attack by the organosilicon hydride (Eq. 66). 

The preparation of the 3-hydroxy-4-vinyl-l,2,5-thiadiazole 112 via oxidative elimination of the thioether 111 according to the published procedure <1966JOC1964> gave unsatisfactory results leading the authors to develop a one-pot procedure for the preparation of the vinylthiadiazole (Equation 19) <2004TL5441>. 

The deprotection of the polyamine-thioethers 40a,b can also be accomplished in similar good yields with Li/naphthalene in THF (214). Cleavage of the thioether functions also commenced with [PdCl2(NCMe)2] in the case of 40b (216), and it is likely that the other macrobicycles will also undergo this metal-ion mediated cleavage reaction as well (Scheme 2). Note that this reaction cleaves only one of the two thioether bonds forming a macrocyclic ligand with one thiophenolate and one vinyl-thioether moiety, as... 

Enynes undergo a similar cyclization to alkylidene thioethers on reaction with thiophenol in the presence of AIBN. This cyclization also involves a vinyl radical (equation I).8... 

Scheme 6.86 displays the generation of 417 from the cephalosporin triflate 416 and the formulas of the trapping products with ethylene, monosubstituted ethyl-enes, 1,1-disubstituted ethylenes and 1,1-dimethylallene [155], It was shown for two such reaction partners (styrene and phenyl vinyl thioether) that the exchange of the... 

For the addition of ethylene, EtOAc as solvent was particularly advantageous and gave 418 in 60% yield (Scheme 6.86). The monosubstituted ethylenes 1-hexene, vinylcyclohexane, allyltrimethylsilane, allyl alcohol, ethyl vinyl ether, vinyl acetate and N-vinyl-2-pyrrolidone furnished [2 + 2]-cycloadducts of the type 419 in yields of 54—100%. Mixtures of [2 + 2]-cycloadducts of the types 419 and 420 were formed with vinylcyclopropane, styrene and derivatives substituted at the phenyl group, acrylonitrile, methyl acrylate and phenyl vinyl thioether (yields of 56-76%), in which the diastereomers 419 predominated up to a ratio of 2.5 1 except in the case of the styrenes, where this ratio was 1 1. The Hammett p value for the addition of the styrenes to 417 turned out to be -0.54, suggesting that there is little charge separation in the transition state [155]. In the case of 6, the p value was determined as +0.79 (see Section 6.3.1) and indicates a slight polarization in the opposite direction. This astounding variety of substrates for 417 is contrasted by only a few monosubstituted ethylenes whose addition products with 417 could not be observed or were formed in only small amounts phenyl vinyl ether, vinyl bromide, (perfluorobutyl)-ethylene, phenyl vinyl sulfoxide and sulfone, methyl vinyl ketone and the vinylpyri-dines. 

Thiols react directly with non-activated alkynes [15] and with 1-alkynyl thioethers [16] to yield alkenyl thioethers in good yield (>76%), whereas thiocyanate anions only add to non-activated alkynes under acidic phase-transfer catalytic conditions on the addition of mercury(II) thiocyanate. Terminal alkynes are converted into vinyl thiocyanates, but disubstituted alkynes also form vinyl isothiocyanates [17]. Major by-products are the ketones formed by solvolysis of the alkynes. 

The most promising tools developed for this sort of analysis are active-site-directed irreversible inhibitors of DUBs. These inhibitors are ubiquitin or ubiquitin-like proteins chemically modified at the C-terminus by an electrophilic moiety such as a Michael acceptor or alkyl halide. The modified ubiquitin can be incubated with a purified DUB or a cell lysate containing DUB activity. Ubiquitin vinyl sul-fone (UbVS) is one such irreversible inhibitor because the vinyl sulfone moiety reacts with the active-site cysteine of the DUB, forming a thioether linkage. The covalent adduct is stable and can be detected in a variety of ways. Labeling of DUBs is specific, as only a DUB active-site cysteine will efficiently react with the vinyl sulfone moiety. 

Metalated vinyl ethers are configurational stable up to —20°C in tetrahydrofuran. H-NMR measurements of 1-ethoxy-1-lithioethene TMEDA did not show any coalescence of the signals for the vinyl protons until the onset of decomposition. Thus, there is no evidence of inversion in this case . Similar configurational stability is displayed by a-lithiated thioethers in tetrahydrofuran no inversion occurs up to 0°C. On the contrary, deprotonated vinyl sulfoxides and sulfones are configurationally less stable . ... 

---