Urethane-modified poly resins

A research program to have benzylic ether-type resin react with polyisocyanate for producing polyurethane or urethane-modified poly-isocyanurate foam is being promoted. A foam which has intermediate properties between phenolic foam and polyurethane foam can be produced. 

Modification by the incorporation of metals or metalloids, styrene, vinyl acetate, poly(styrene-co-maleic anhydride), urethane linkages, and so on result in poly(ester amide) resins with good chemical properties and excellent thermal resistance. Some can also be used as effective antibacterial and biologically safe corrosion protective coating materials. Urethane-modified ethylenediamine tetraacetic add the fatty amide diol of linseed oil-based poly(ester amide) resin exhibits excellent physicomechanical properties, high thermostability up to 200°C and anticorrosive properties. ... 

Eventually, bis(2-hydroxyethyl)isosorbide may be chemically modified to form, bisacrylate esters or bis vinyl ethers, which can be used in photochemical or thermal cured vinyl resin compositions. Alternatively, this compound may be reacted with epichlorohy-drin and bases to form bis(glycidyl ether) adducts which may be used in epoxy resins. Bis(2-hydroxyethyl)isosorbide will find use as a monomer in many polymeric compositions, such as polyesters, poly(urethane)s, poly(ether sulfone)s. 

Amoco Resin 18. [Amoco] Poly-a-methylstyrene extrusion and mending process aid in ABS, PVC, CPVC, and semirigid vinyl, thermoplastic urethanes, molded rubbers, and thermoplastic elastomers modifier and rein-forcer in adhesives, thermoplastic powd. coatings, hot-mielt coatings. 

The use of polymeric blend composites for corrosion protection of AA 2024-T3 has been reported, including composites formed by incorporating water-soluble conducting polymers (either polymethox-yaniline sulfonic acid or poly(4-(3-pyrrole) )butane sulfonate) into various binders (a cross-linked polyvinyl alcohol, a waterborne epoxy, a modified water-dispersible polyester, and a UV-curable urethane acrylate binder) [149]. The preparation of epoxy and polyaniline composite coatings has been described, using either nanodispersed EB particles [91] or EB that was first dissolved in selected amine hardeners before adding the epoxy resin [98]. Even with very low EB loadings, these workers reported enhanced corrosion protection for steel. 

Mesua ferrea L. seed oil-based poly(urethane ester) and poly(urethane amide) resins with an NCO/OH ratio of 0.5 are modified by commercially available bisphenol-A based epoxy resin and partially butylated ME resin... 

Using a mixture of castor oil and hydroxyether of bisphenol-A (HBA) as the polyol and reacting with TDI in the presence of DBTDL catalyst at 35°C, a series of polyurethanes are prepared in an air-circulating oven for 48 h. A series of poly(urethane urea)-vinyl polymer hybrid aqueous dispersions are prepared. Waterborne poly(urethane urea) is synthesised from castor oil and polyoxypropylene polyol M = 1000 g moL ), dimethylol propionic acid and isophorone diisocyanate and then neutralised with tertiary amine. The hybrid aqueous dispersion with high oil content poly(urethane urea) exhibits excellent compressive mechanical strength. Sunflower oil-modified waterborne polyurethane resin may also be prepared. The waterborne resin is synthesised from the monoglyceride of the oU, poly(propylene-ethylene) triol, tartaric acid and toluene diisocyanate, then neutralised with triethyl amine. 

Two types of environmentally friendly jute fibre reinforced green composites have been studied. These are based on Mesua ferrea L. seed oil-based poly(urethane ester) and poly(urethane amide) resin blends with commercially available partially butylated melamine-formaldehyde and epoxy resins by solution impregnation and hot-curing methods. The composites were cured at a temperature of about 130-140°C under a pressure of 35.5 kg cm for around 2 h.The physical, mechanical and chemical properties of the epoxy-modified polyurethane composites were better than those of the MF-modified composites. They also possessed excellent chemical resistance and hydrolytic stability in water, acid and salt solutions, making them useful for low load-bearing applications. 

---