Toxic materials skin absorption

Acrolein is highly toxic by skin absorption. Brief contact may result in the absorption of harmful and possibly fatal amounts of material. Skin contact causes severe local irritation and chemical bums. Poly(vinyl chloride) coated protective gloves should be used (99). 

Hazard Toxic material. TLV 10 ppm, toxic by skin absorption. 

Trinitrophenol, also known as picric acid, is composed of yellow crystals and is a nitro hydrocarbon derivative. It is shipped with not less than 10% water as a wetted explosive. There is a severe explosion risk when shocked or heated to 572°F, and it reacts with metals or metallic salts. In addition to being flammable and explosive, it is toxic by skin absorption. Picric acid has caused disposal problems in school and other chemistry laboratories where the moisture has evaporated from the container as the material ages. When the picric acid dries out, it becomes a high explosive closely related to TNT. Picric acid has been found in various amounts in school labs across the country. In a dry condition, picric acid is dangerous and should be handled by the bomb squad. The structure and molecular formula for picric acid are shown in Figure 6.3. 

Health and Safety Factors. Animal-feeding studies of DMPPO itself have shown it to be nontoxic on ingestion. The solvents, catalyst, and monomers that are used to prepare the polymers, however, should be handled with caution. Eor example, for the preparation of DMPPO, the amines used as part of the catalyst are flammable toxic on ingestion, absorption, and inhalation and are also severe skin and respiratory irritants (see Amines). Toluene, a solvent for DMPPO, is not a highly toxic material in inhalation testing the TLV (71) is set at 375 mg/m, and the lowest toxic concentration is reported to be 100—200 ppm (72). Toxicity of 2,6-dimethylphenol is typical of alkylphenols (qv), eg, for mice, the acute dermal toxicity is LD q, 4000 mg/kg, whereas the acute oral toxicity is LD q, 980 mg/kg (73). The Noryl blends of DMPPO and polystyrene have PDA approval for reuse food apphcations. 

Skin. The skin may become contaminated accidentally or, in some cases, materials may be deHberately appHed. Skin is a principal route of exposure in the industrial environment. Local effects that are produced include acute or chronic inflammation, allergic reactions, and neoplasia. The skin may also act as a significant route for the absorption of systemicaHy toxic materials. Eactors influencing the amount of material absorbed include the site of contamination, integrity of the skin, temperature, formulation of the material, and physicochemical characteristics, including charge, molecular weight, and hydrophilic and lipophilic characteristics. Determinants of percutaneous absorption and toxicity have been reviewed (32—35,42,43,46—49). 

Health and Safety Factors. Neopentanoic acid possesses low toxicity, either by ingestion (oral LD q in rats is 2.0 g/kg) or by skin absorption (dermal LD q in rabbits is 3.16 g/kg). The principal ha2ards associated with neopentanoic acid at ambient temperatures are from eye and skin irritation. At elevated temperatures, where concentrations of the vapor are significant, irritation of the respiratory tract can also occur. Contact with the material should be avoided. 

Toxicological studies conducted on DCPD indicate that it is a moderately toxic material and, to some extent, an irritant and a narcotic. By oral administration in the rat, the LD q is 0.82 g/kg of body weight, and by skin absorption in the rabbit, the LD q is 6.72 ml,/kg. An atmospheric concentration of 2000 ppm causes death in rats exposed for a period of 4 hours. 

Toxic chemicals can enter the body in various ways, in particular by swallowing, inhalation and skin absorption. Skin absorption may lead to dermatitis and this can be a most annoying complaint. Whereas some chemicals may have an almost universal effect on human beings, others may attack only a few persons. A person who has worked with a given chemical for some years may suddenly become sensitised to it and from then on be unable to withstand the slightest trace of that material in the atmosphere. He may as a result also be sensitised not only to the specific chemical that caused the initial trouble but to a host of related products. Unfortunately a number of chemicals used in the plastics industry have a tendency to be dermatitic, including certain halogenated aromatic materials, formaldehyde and aliphatic amines. 

All of these chemicals pose an inhalation hazard but a toxic dose could also be obtained through skin absorption or ingestion. Factors that were considered when selecting potential candidate chemicals include global production, physical state of the material (i.e., gas, liquid, or solid), chemicals likely to cause major morbidity or mortality, potential to cause public panic and social disruption, chemicals that require special action for public health preparedness, history of previous use by the military, and/or involvement in a significant industrial accident. 

Yellow oily liquid. Commercial grade is 80-90% agent. Both geometric isomers have similar toxicity. This material is hazardous through inhalation, skin absorption, penetration through broken skin, and ingestion, and produces local skin/eye impacts. This material is absorbed through the skin very quickly. 

Skin Concentration of toxicant in applied material, skin area exposed, absorption factor... 

There are two reasons why artists are particularly vulnerable to diseases caused by exposure to toxic materials. First of all, artists, by the nature of their work, may have daily, long-term contact with materials that are highly toxic. Second, art materials are used as aerosols, powders, dusts, and in solution, from which maximum physical absorption and adsorption are possible. An artist can inhale aerosols. Powders and dusts are also inhaled and, in addition, can be absorbed through the skin. Solutions and many solvents evaporate into the air for the artist to inhale over long periods of time. This chemical assault, day after day, causes a variety of illnesses. In the following section on artists illnesses, all the chemicals cited are used by artists as they draw and paint, sculpt, work with metals, or develop and print photos—in general, as they engage in any art-associated activity. 

Hazard Toxic by inhalation and skin absorption. Strong oxidizing agent may ignite organic materials. 

Properties White powder. 98.5% Min purity. Hazard Toxic material by skin absorption. TLV 0.1 mg(Sn)/m3. 

In the agricultural field, it is used to control many pests, including moth pests of cotton, fruit and vegetable crops. Cypermethrin is a moderately toxic material by thermal absorption or ingestion. It causes irritation to the skin and eyes. If exposed for a long period, it may affect the nervous system. 

Due to protein-water binding, human skin has the capacity to absorb five to six times its weight in water. The extent of skin hydration is directly related to the penetration rate of toxic materials. Controversy exists about whether hair follicles contribute to increased penetration, but some studies do show increased absorption through hairy skin. Inflammation in the skin leads to vasodilatation and increased blood flow and subsequently increased penetration of toxic material. Aging contributes to decreased lipid barrier protection and decreased intercellular cohesion and increased penetration of toxic material. 

---