Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thermodynamic interaction-driven

PDMS based siloxane polymers wet and spread easily on most surfaces as their surface tensions are less than the critical surface tensions of most substrates. This thermodynamically driven property ensures that surface irregularities and pores are filled with adhesive, giving an interfacial phase that is continuous and without voids. The gas permeability of the silicone will allow any gases trapped at the interface to be displaced. Thus, maximum van der Waals and London dispersion intermolecular interactions are obtained at the silicone-substrate interface. It must be noted that suitable liquids reaching the adhesive-substrate interface would immediately interfere with these intermolecular interactions and displace the adhesive from the surface. For example, a study that involved curing a one-part alkoxy terminated silicone adhesive against a wafer of alumina, has shown that water will theoretically displace the cured silicone from the surface of the wafer if physisorption was the sole interaction between the surfaces [38]. Moreover, all these low energy bonds would be thermally sensitive and reversible. [Pg.689]

Self-assembled monolayers (SAMs) [8] The layers are formed by heterologous interaction between reactive groups, such as thiols, and noble metals, such as gold or silver. Since the molecules are selectively adsorbed on these metals, film growth stops after the first monolayer is completed. The molecular aggregation is enthalpy driven, and the final structure is in thermodynamic equilibrium. [Pg.188]

A. Miklavc, D. Kocjan, J. Mavri, J. Roller and D. Hadzi, On the fundamental difference in thermodynamics of agonist and antagonist interactions with P-adrenergic receptors and the mechanism of entropy-driven binding. Biochem. Pharmacol., 40 (1990) 663-669. [Pg.417]

The study of how fluids interact with porous solids is itself an important area of research [6], The introduction of wall forces and the competition between fluid-fluid and fluid-wall forces, leads to interesting surface-driven phase changes, and the departure of the physical behavior of a fluid from the normal equation of state is often profound [6-9]. Studies of gas-liquid phase equilibria in restricted geometries provide information on finite-size effects and surface forces, as well as the thermodynamic behavior of constrained fluids (i.e., shifts in phase coexistence curves). Furthermore, improved understanding of changes in phase transitions and associated critical points in confined systems allow for material science studies of pore structure variables, such as pore size, surface area/chemistry and connectivity [6, 23-25],... [Pg.305]

The interaction between 4-(4-hydroxybut-2-ynyloxy)-3-(phenylsulfonyl)-l,2,5-oxadiazole-2-oxide 16 and bovine serum albumin (BSA) was studied by spectroscopic methods including fluorescence and UV-Vis absorption spectroscopy. The results indicate that molecules 16 bind with BSA forming 1 1 complex. Thermodynamic parameters, such as AH, AG, and A.Y, were calculated. The results indicate that the binding reaction is mainly entropy driven and hydrophobic forces play a major role in this reaction <2006CHJ1050>. [Pg.325]

Interface and colloid science has a very wide scope and depends on many branches of the physical sciences, including thermodynamics, kinetics, electrolyte and electrochemistry, and solid state chemistry. Throughout, this book explores one fundamental mechanism, the interaction of solutes with solid surfaces (adsorption and desorption). This interaction is characterized in terms of the chemical and physical properties of water, the solute, and the sorbent. Two basic processes in the reaction of solutes with natural surfaces are 1) the formation of coordinative bonds (surface complexation), and 2) hydrophobic adsorption, driven by the incompatibility of the nonpolar compounds with water (and not by the attraction of the compounds to the particulate surface). Both processes need to be understood to explain many processes in natural systems and to derive rate laws for geochemical processes. [Pg.436]

In general, the (scarce) thermodynamic data for exchanges involving complexes leads us to conclude that the selectivity enhancement upon complexing is enthalpy driven and may be ascribed to enhanced charge dependent (primarily coulombic) interactions with the surface as compared with the aqueous ions. [Pg.271]

Palladium hydride is not a stoichiometric chemical compound but simply a metal in which hydrogen is dissolved and stored in solid state, in space between Pd atoms of crystal lattice of the host metal. Relatively high solubility and mobility of H in the FCC (face-centered-cubic) Pd lattice made the Pd H system one of the most transparent, and hence most studied from microstructural, thermodynamic, and kinetic points of view. Over the century that followed many metal-hydrogen systems were investigated while those studies were driven mostly by scientific curiosity. Researchers were interested in the interaction of hydrogen molecule with metal surfaces adsorption and diffusion into metals. Many reports on absorption of in Ni, Fe, Ni, Co, Cu, Pd, Pt, Rh, Pd-Pt, Pd-Rh, Mo-Fe, Ag-Cu, Au-Cu, Cu-Ni, Cu-Pt, Cu-Sn, and lack of absorption in Ag, Au, Cd, Pb, Sn, Zn came from Sieverts et al. [30-33]. [Pg.8]

HYDROPHOBIC INTERACTIONS. These bonding interactions arise from the tendency of nonpolar side chains of amino acids (or lipids) to reside in the interior, nonaqueous environment of a protein (or membrane/ micelle/vesicle). This process is accompanied by the release of tightly bound water molecules from these apolar side-chain moieties. The hydrophobic effect is thermodynamically driven by the increased disorder i.e., A5 > 0) of the system, thereby overcoming the unfavorable enthalpy change i.e., AH < 0) for water release from the apolar groups. [Pg.706]

Johnson, D.W. and Raymond, KN. (2001) The self-assembly of a [Ga4L6]12-tetrahedral cluster thermodynamically driven by host-guest interactions. Inorg. Chem., 40 (20), 5157-5161. [Pg.195]

What is the driving force for protein adsorption Is the adsorption driven by overall energetic (enthalpic) interactions or does the entropic contribution prevail Do both entropic and enthalpic contributions play a major part in the adsorption process, the extent of each depending on the particular protein and surface in question An illuminating thermodynamic analysis given by Norde and Lyklema 62,66) for the adsorption of two different globular proteins (human serum albumin, HSA, and bovine pancreatic ribonuclease, RNase) on polystyrene latices will be presented. We believe this analysis has general validity. [Pg.25]


See other pages where Thermodynamic interaction-driven is mentioned: [Pg.57]    [Pg.377]    [Pg.83]    [Pg.160]    [Pg.122]    [Pg.297]    [Pg.114]    [Pg.486]    [Pg.178]    [Pg.189]    [Pg.31]    [Pg.66]    [Pg.113]    [Pg.114]    [Pg.120]    [Pg.150]    [Pg.181]    [Pg.194]    [Pg.460]    [Pg.198]    [Pg.160]    [Pg.359]    [Pg.363]    [Pg.46]    [Pg.241]    [Pg.347]    [Pg.21]    [Pg.455]    [Pg.138]    [Pg.217]    [Pg.4]    [Pg.27]    [Pg.35]    [Pg.17]    [Pg.88]    [Pg.155]    [Pg.257]    [Pg.312]    [Pg.416]    [Pg.145]   
See also in sourсe #XX -- [ Pg.57 ]




SEARCH



Thermodynamic interactions

Thermodynamics interactions

© 2024 chempedia.info