Tandem mass spectrometry with triple quadrupole

Figure 3.9 Conceptual view of tandem mass spectrometry with a tandem-inspace triple quadrupole mass analyzer." The first mass analyzer (Ql) selects the precursor ion of interest by allowing only it to pass, while discriminating against all others. The precursor ion is then fragmented, usually by energetic collisions, in the second quadrupole (q2) that is operated in transmissive mode allowing all fragment ions to be collimated and passed into the third quadrupole (Q3). Q3 performs mass analysis on the product ions that compose the tandem mass spectra and are rationalized to a structure.

Corn-based foods followed by fumonisin B2 (FB2).The problems and risks associated with fumonisin contamination have resulted in the development of precise, reliable and sensitive methods for its determination in corn and corn-based foods (Magan Olsen, 2004, as cited in Silva et al., 2009). Therefore, the quality parameters in the analysis of FBI and FB2 in corn-based products obtained with LC with fluorescence detector have been investigated (Silva et al, 2009). Furthermore, a comparison study between fluorescence detector (FD), mass spectrometry, and tandem mass spectrometry with a triple quadrupole (QqQ) analyzer using an electrospray ionization interface for the determination of fumonisin B1 and B2 in corn-based products has been performed. A comparative study of the three LC detectors, FD, single quadrupole, QqQ for the analysis of fumonisins in corn samples has been performed. The response achieved by the three detectors was sensitive enough to study the maximum contents established by the EU legislation. These LC detectors would be appropriate for quantification purposes but the acquisition of at least two transitions achieved with QqQ provided a univocal identification. 

F.-F. Hsu and J. Turk, Characterization of phosphatidylethanolamine as a lithiated adduct by triple quadrupole tandem mass spectrometry with electrospray ionization, J. Mass Spectrom. 35, 596-606 (2000). 

Hsu, F.F. and Turk, J. (2000) Structural determination of sphingomyelin by tandem mass spectrometry with electrospray ionization. J. Am. Soc. Mass Spectrom. 11, 437 149. Hsu, F.F. and Turk, J. (2001) Structural determination of glycosphingolipids as lithiated adducts by electrospray ionization mass spectrometry using low-energy collisional-activated dissociation on a triple stage quadrupole instrument. J. Am. Soc. Mass Spectrom. 12, 61-79. 

Hsu, F.F. and Turk, J. (2001) Studies on phosphatidylglycerol with triple quadrupole tandem mass spectrometry with electrospray ionization fragmentation processes and structural characterization. J. Am. Soc. Mass Spectrom. 12,1036-1043. 

Tandem mass spectrometry (MS/MS) is a method for obtaining sequence and structural information by measurement of the mass-to-charge ratios of ionized molecules before and after dissociation reactions within a mass spectrometer which consists essentially of two mass spectrometers in tandem. In the first step, precursor ions are selected for further fragmentation by energy impact and interaction with a collision gas. The generated product ions can be analyzed by a second scan step. MS/MS measurements of peptides can be performed using electrospray or matrix-assisted laser desorption/ionization in combination with triple quadruple, ion trap, quadrupole-TOF (time-of-flight), TOF-TOF or ion cyclotron resonance MS. Tandem... 

Figure 5.40 Product-ion spectrum of the (M + H)+ ion (m/z 614) of Indinavir with the proposed origins of the ions observed. Reprinted by permission of Elsevier Science from Identification of in vitro metabolites of Indinavir by Intelligent Automated LC-MS/MS (INTAMS) utilizing triple-quadrupole tandem mass spectrometry , by Yu, X., Cui, D. and Davis, M. R., Journal of the American Society for Mass Spectrometry, Vol. 10, pp. 175-183, Copyright 1999 by the American Society for Mass Spectrometry.

Different mass analysers can be combined with the electrospray ionization source to effect analysis. These include magnetic sector analysers, quadrupole filter (Q), quadrupole ion trap (QIT), time of flight (TOF), and more recently the Fourrier transform ion cyclotron resonance (FTICR) mass analysers. Tandem mass spectrometry can also be effected by combining one or more mass analysers in tandem, as in a triple quadrupole or a QTOF. The first analyzer is usually used as a mass filter to select parent ions that can be fragmented and analyzed by subsequent analysers. 

Multiple mass analyzers exist that can perform tandem mass spectrometry. Some use a tandem-in-space configuration, such as the triple quadrupole mass analyzers illustrated (Fig.3.9). Others use a tandem-in-time configuration and include instruments such as ion-traps (ITMS) and Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS or FTMS). A triple quadrupole mass spectrometer can only perform the tandem process once for an isolated precursor ion (e.g., MS/MS), but trapping or tandem-in-time instruments can perform repetitive tandem mass spectrometry (MS ), thus adding n 1 degrees of structural characterization and elucidation. When an ion-trap is combined with HPLC and photodiode array detection, the net result is a profiling tool that is a powerful tool for both metabolite profiling and metabolite identification. 

Fig. 7. Protein identification with electrospray tandem mass spectrometry and a triple quadrupole mass spectrometer. Fragment spectra of several peptides are generated during one investigation. From the fragment spectra short sequence stretches can be read. Together with their mass location in the peptide of the measured mass, they can be used to specifically identify a protein in the database. Because the protein identification depends only on one peptide, several proteins can be identified from one sample.

Fig. 1.6 (A) Electron impact spectrum obtained on a single quadrupole mass spectrometer of a compound with Mr = 355. (B) Product ion spectrum after atmospheric pressure ionization obtained on a triple quadrupole instrument. Chemical ionization and atmospheric pressure ionization give in both cases protonated precursor ions, which is ideal for tandem mass spectrometry.

Superior sensitivity, efficiency, and specificity have made high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS), the predominant analytical technique for characterization and quantitative analysis of metabolites (Kostiainen et al., 2003 Ma et al., 2006 Prakash et al., 2007). Ion trap, triple-quadrupole, and quadmpole time-of-flight (Q-TOF) mass spectrometers are routinely used to profile and characterize metabolites in plasma and excreta (Ma et al., 2006). The combination of scan types and features available on mass spectrometers of different design (product ion, MS", neutral loss, precursor ion scans, accurate mass measurements) allows identification and characterization of putative and unexpected metabolites with or without little prior knowledge of biotransformation pathways of a given dmg molecule. 

Martens-Lobenhoffer et al. [119] used chiral HPLC-atmospheric pressure photoionization tandem mass-spectrometric method for the enantio-selective quantification of omeprazole and its main metabolites in human serum. The method features solid-phase separation, normal phase chiral HPLC separation, and atmospheric pressure photoionization tandem mass spectrometry. The internal standards serve stable isotope labeled omeprazole and 5-hydroxy omeprazole. The HPLC part consists of Agilent 1100 system comprising a binary pump, an autosampler, a thermo-stated column component, and a diode array UV-VIS detector. The enantioselective chromatographic separation took place on a ReproSil Chiral-CA 5 ym 25 cm x 2 mm column, protected by a security guard system, equipped with a 4 mm x 2-mm silica filter insert. The analytes were detected by a Thermo Scientific TSQ Discovery Max triple quadrupole mass spectrometer, equipped with an APPI ion source with a... 

In addition, due to lack of MS/MS capability, SIM has been more commonly performed on single quadrupole MS, while SRM has been broadly adapted on triple quadrupole (Figure 13-4) and ion-trap mass spectrometers. The increase in sensitivity and selectivity of SRM stem from the ion-chromatogram (i.e., LC-MS/MS) obtained by specific precursor-to-product ion transition for an analyte of interest (Figure 13-4). Conversely, in an SIM mode, the relative background noise due to the presence of other isobaric species (i.e., ions with a same m/z as the analyte of interest) can result in a lower signal-to-noise ratio for the analyte. Due to the widespread acceptance of SRM in quantitative analysis, the remaining part of this section focuses on a description of tandem-mass spectrometry (MS/MS), which is utilized in SRM (or MRM) experiments. 

---