Sulfonic acids, addition reaction

When pyridine is treated with thionyl chloride, a synthetically useful dichloride salt is formed, which can, for example, be transformed into pyridine-4-sulfonic acid. The reaction is believed to involve initial attack by sulfur at nitrogen, followed by nucleophilic addition of a second pyridine at C-4 (cf. 8.12.2). ... 

As in most electrophilic reactions, the abiUty to stabilize the positive charge generated by the initial addition strongly affects the relative rates. MX reacts faster than OX and PX because both methyl groups work in conjunction to stabilize the charge on the next-but-one carbon. Sulfonation was, at one time, used to separate MX from the other Cg aromatic isomers. MX reacts most rapidly to form the sulfonic acid which remains in the aqueous phase. The sulfonation reaction is reversible, and MX can be regenerated. 

Acid-Gatalyzed Synthesis. The acid-catalysed reaction of alkenes with hydrogen sulfide to prepare thiols can be accompHshed using a strong acid (sulfuric or phosphoric acid) catalyst. Thiols can also be prepared continuously over a variety of soHd acid catalysts, such as seoHtes, sulfonic acid-containing resin catalysts, or aluminas (22). The continuous process is utilised commercially to manufacture the more important thiols (23,24). The acid-catalysed reaction is commonly classed as a Markownikoff addition. Examples of two important industrial processes are 2-methyl-2-propanethiol and 2-propanethiol, given in equations 1 and 2, respectively. 

The azo coupling reaction proceeds by the electrophilic aromatic substitution mechanism. In the case of 4-chlorobenzenediazonium compound with l-naphthol-4-sulfonic acid [84-87-7] the reaction is not base-catalyzed, but that with l-naphthol-3-sulfonic acid and 2-naphthol-8-sulfonic acid [92-40-0] is moderately and strongly base-catalyzed, respectively. The different rates of reaction agree with kinetic studies of hydrogen isotope effects in coupling components. The magnitude of the isotope effect increases with increased steric hindrance at the coupler reaction site. The addition of bases, even if pH is not changed, can affect the reaction rate. In polar aprotic media, reaction rate is different with alkyl-ammonium ions. Cationic, anionic, and nonionic surfactants can also influence the reaction rate (27). 

In the first case (22), almost stoichiometric amounts of sulfuric acid or chlorosulfonic acid are used. The amine sulfate or the amine chlorosulfate is, first, formed and heated to about 180 or 130°C, respectively, to rearrange the salt. The introduction of the sulfonic acid group occurs only in the ortho position, and an almost quantitative amount of l-aminoanthraquinone-2-sulfonic acid is obtained. On the other hand, the use of oleum (23) requires a large excess of SO to complete the reaction, and inevitably produces over-sulfonated compound such as l-amino-anthraquinone-2,4-disulfonic acid. Addition of sodium sulfate reduces the byproduct to a certain extent. Improved processes have been proposed to make the isolation of the intermediate (19) uimecessary (24,25). 

The action of sulfur nucleophiles like sodium bisulfite and thiophenols causes even pteridines that are unreactive towards water or alcohols to undergo covalent addition reactions. Thus, pteridin-7-one smoothly adds the named S-nucleophiles in a 1 1 ratio to C-6 (65JCS6930). Similarly, pteridin-4-one (73) yields adducts (74) in a 2 1 ratio at C-6 and C-7 exclusively (equation 14), as do 4-aminopteridine and lumazine with sodium bisulfite. Xanthopterin forms a 7,8-adduct and 7,8-dihydropterin can easily be converted to sodium 5,6,7,8-tetrahydropterin-6-sulfonate (66JCS(C)285), which leads to pterin-6-sulfonic acid on oxidation (59HCA1854). 

Additional evidence that a dynamic equilibrium exists between an enamine, N-hemiacetal, and aminal has been presented by Marchese (41). It should be noted that no acid catalysts were used in the reactions of aldehydes and amines discussed thus far. The piperidino enamine of 2-ethylhexanal (0.125 mole), morpholine (0.375 mole), and p-toluene-sulfonic acid (1.25 x 10 mole) diluted with benzene to 500 ml were refluxed for 5 hr. At the end of this time the enamine mixture was analyzed by vapor-phase chromatography, which revealed that exchange of the amino residue had occurred in a ratio of eight morpholine to one piperidine. Marchese proposed a scheme [Eqs. (4), (5) and (6)] to account for these... 

The reaction of 2,6-di-tert-butylpyridine with SO3 at elevated temperatures gives (43) in addition to the 3-sulfonic acid. ... 

Reactive compatibilization of engineering thermoplastic PET with PP through functionalization has been reported by Xanthos et al. [57]. Acrylic acid modified PP was used for compatibilization. Additives such as magnesium acetate and p-toluene sulfonic acid were evaluated as the catalyst for the potential interchange or esterification reaction that could occur in the melt. The blend characterization through scanning electron microscopy, IR spectroscopy, differential scanning calorimetry, and... 

N-Aminobenzoxazolin-2-one (4), which was readily prepared by animation of benzoxazolin-2-one with hydroxylamine-O-sulfonic acid, is also a useful nitrene precursor (Scheme 2.2). Oxidation of 4 with lead(iv) acetate in the presence of a conjugated diene resulted in exclusive 1,2-addition of nitrene 5, to yield vinylazir-idine (6) in 71 % yield [6]. The formation of vinylaziridines through 1,2-additions of methoxycarbonylnitrene (2) or amino nitrene 5 contrasts with the claimed 1,4-ad-dition of nitrene itself to butadiene [7]. Since the reaction proceeded stereospecif-ically even at high dilution, the nitrene 5 appears to be generated in a resonance-stabilized singlet state, which is probably the ground state [8]. 

In addition to protons, other electrofugic leaving groups such as SO3 (i. e., anions of sulfonic acids), Cl, Br, I, C02, and others can also be displaced in azo coupling reactions with aromatic substrates. The mechanism of such substitutions is in principle the same as that of dehydrogenation (see Fischer and Zollinger, 1972). 

Normally, reactive derivatives of sulfonic acids serve to transfer electrophilic sulfonyl groups259. The most frequently applied compounds of this type are sulfonyl halides, though they show an ambiguous reaction behavior (cf. Section III.B). This ambiguity is additionally enhanced by the structure of sulfonyl halides and by the reaction conditions in the course of electrophilic sulfonyl transfers. On the one hand, sulfonyl halides can displace halides by an addition-elimination mechanism on the other hand, as a consequence of the possibility of the formation of a carbanion a to the sulfonyl halide function, sulfenes can arise after halide elimination and show electrophilic as well as dipolarophilic properties. 

Also, nylon-6 waste may be hydrolyzed in the presence of an aqueous alkali metal hydroxide or acid5 to produce an alkali metal or acid salt of 6-aminocaproic acid (ACA). The reaction of nylon-6 waste with dilute hydrochloric acid is rapid at 90- 100°C. The reaction mixture is poured into water to form a dilute aqueous solution of the ACA salt. Filtration is used to remove undissolved impurities such as pigments, additives, and fillers followed by treatment of the acid solution with a strong cation exchange resin. A sulfonic acid cationic exchanger absorbs ACA salt and pure ACA is eluted with ammonium hydroxide to form a dilute aqueous solution. Pure ACA is obtained by crystallization of die solution. 

Amides are very weak nucleophiles, far too weak to attack alkyl halides, so they must first be converted to their conjugate bases. By this method, unsubstituted amides can be converted to N-substituted, or N-substituted to N,N-disubstituted, amides. Esters of sulfuric or sulfonic acids can also be substrates. Tertiary substrates give elimination. O-Alkylation is at times a side reaction. Both amides and sulfonamides have been alkylated under phase-transfer conditions. Lactams can be alkylated using similar procedures. Ethyl pyroglutamate (5-carboethoxy 2-pyrrolidinone) and related lactams were converted to N-alkyl derivatives via treatment with NaH (short contact time) followed by addition of the halide. 2-Pyrrolidinone derivatives can be alkylated using a similar procedure. Lactams can be reductively alkylated using aldehydes under catalytic hydrogenation... 

Organoboranes react with a mixture of aqueous NH3 and NaOCl to produce primary amines. It is likely that the actual reagent is chloramine NH2CI. Chloramine itself,hydroxylamine-O-sulfonic acid in diglyme, and trimethyl-silyl azide " also give the reaction. Since the boranes can be prepared by the hydroboration of alkenes (15-16), this is an indirect method for the addition of NH3 to a double bond with anti-Markovnikov orientation. Secondary amines can be prepared by the treatment of alkyl- or aryldichloroboranes or dialkylchlorobor-anes with alkyl or aryl azides. 

---