Styrene-maleic anhydride plastic

System for Automotive S/MA (Styrene-Maleic Anhydride) Plastics System for Automotive Thermoplastic Elastomeric Polyesters ... 

Styrene maleic anhydride SMA is a copolymer made with or without rubber modifiers. They are sometimes alloyed with ABS and offer good heat resistance, high impact strength and gloss but with little appreciable improvement in weatherability or chemical resistance over other styrene based plastics. 

This molecule, CH2 = C - CN, is copolymerized with acrylic acid, styrene, maleic anhydride, butadiene, or is op re ne to produce a wide variety of plastics and coatings. 

Additional opportunities in the styrene plastics industry exist for the development of products having such unique properties as high heat resistance and optical transparency. Arco produces the Dylark family of heat-resistant styrene plastics, which are copolymers of styrene-maleic anhydride. These products have a good balance of mechanical properties and have a heat distortion (under ASTM D68) of 234 F (33) which is markedly higher than homo polystyrene. 

J. Simonsen, R. Jacobson and R. Rowell. Wood fiber reinforcement of styrene-maleic anhydride copolymers. In Fourth International Conference on Woodflber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 215-220. 

Attempts have been made over time to improve the physical properties of novolacs. The use of phenol formaldehyde resins prepared in alkaline medium in photoresist compositions is mentioned in a Kalle Co. AG patent. The use of polyvinyl ethers in combination with novolacs to impart stickiness and plasticization action to the latter was patented by Christensen. Steinhoff, Isaacson, and Roelants of the Shipley Company mention the use of vinyl ethers in a patent on roller coating. Lower alkyl polyvinyl ethers, such as methyl, ethyl, butyl, and isobutyl, are added to novolac resins to improve coating flexibility and adhesion to metal surfaces as well as to improve resistance to mildly alkaline solutions. The use of styrene, methyl styrene, and styrene-maleic anhydride copolymers in combination with novolac was mentioned in several patents of both Shipley and Kalle Co. AG. When novolac is copolymerized with maleic anhydride, a resin that is readily soluble in alkaline solutions is obtained. ... 

The process can combine conventional glass fiber roving, aramid, or carbon fiber tows with TPs, most commonly polyethylene terephthalate (PET) and nylon (polyamide/PA). Other plastics used include polyphenylene sulphide (PPS), styrene-maleic anhydride (SMA), high-density polyethylene (HDPE), and polypropylene (PP). The TPs can take the form of pellets, chips, chunks, or shreds, and as the process uses hot-melt injection, no solvents or two-part systems are involved. Additives such as colorants and fillers can be used as required. 

Chem. Descrip. Styrene maleic anhydride copolymer ammonium salt Uses Surfactant, dispersant for pigment disps., paints Features Exc. compat. improved adhesion to plastic film Properties Gardner 3 clear liq. 19% solids SMA 2000 [Atofina Atofina SA]... 

Another plastic called styrene maleic anhydride (SMA) was first introduced commercially imder the trade name DYLARK and currently is sold by NOVA Chemicals for the IP market segment as well. Styrene maleic anhydride copolymers were developed during the late 1960s. In the early... 

A few other types of plastics are recycled in small amounts. For example, Arco Chemical Company developed a process for recycling glass-reinforced styrene maleic anhydride from industrial scrap. 

Styrene-maleic anhydride copolymers (SMA) Excellent heat resistance compared to typical polystyrenes Can be reinforced with glass fiber to enhance heat resistance, and with rubber to prevent plastic from becoming too brittle. Are used in IP in BMW 3 and 5 series and in Fiat Coupe, covered with polyurethane foam. [63]... 

In the early 70s it was announced that organotin compounds had been bonded to such plastics as polystyrene, polymethacrylate, polyester, polyvinyl chloride, and cellulose polymer backbones. " These have been termed organometallic polymers (OMP). Triethyltin hydroxide was allowed to react with a copolymer of styrene-maleic anhydride. These polymers can be incorporated in a marine paint which, when applied, would retain an anti-fouling activity through hydrolytic cleavage of the metal-oxygen-polymer bond. 

The largest user of phenol in the form of thermosetting resins is the plastics industry. Phenol is also used as a solvent and in the manufacture of intermediates for pesticides, pharmaceuticals, and dyestuffs. Styrene is used in the manufacture of synthetic rubber and polystyrene resins. Phthalic anhydride is used in the manufacture of DMT, alkyd resins, and plasticizers such as phthalates. Maleic anhydride is used in the manufacture of polyesters and, to some extent, for alkyd resins. Minor uses include the manufacture of malathion and soil conditioners. Nitrobenzene is used in the manufacture of aniline, benzidine, and dyestuffs and as a solvent in polishes. Aniline is used in the manufacture of dyes, including azo dyes, and rubber chemicals such as vulcanization accelerators and antioxidants. 

Uses Manufacture of ethylbenzene (preparation of styrene monomer), dodecylbenzene (for detergents), cyclohexane (for nylon), nitrobenzene, aniline, maleic anhydride, biphenyl, benzene hexachloride, benzene sulfonic acid, phenol, dichlorobenzenes, insecticides, pesticides, fumigants, explosives, aviation fuel, flavors, perfume, medicine, dyes, and many other organic chemicals paints, coatings, plastics and resins food processing photographic chemicals nylon intermediates paint removers rubber cement antiknock gasoline solvent for fats, waxes, resins, inks, oils, paints, plastics, and rubber. 

Maleic anhydride is an important intermediate in the chemical industry [8-9]. It is used in polycondensation and addition reactions. The end products of these reactions are polyesters, alkyd resins, lacquers, plasticizers, copolymers and lubricants. For example, the copolymer of styrene and maleic anhydride is an engineering plastic. 

Separation of benzene/cyclohexane mixture is investigated most extensively. This is not surprising because separation of this mixture is very important in practical terms. Benzene is used to produce a broad range of valuable chemical products styrene (polystyrene plastics and synthetic rubber), phenol (phenolic resins), cyclohexane (nylon), aniline, maleic anhydride (polyester resins), alkylbenzenes and chlorobenzenes, drugs, dyes, plastics, and as a solvent. Cyclohexane is used as a solvent in the plastics industry and in the conversion of the intermediate cyclohexanone, a feedstock for nylon precursors such as adipic acid. E-caprolactam, and hexamethylenediamine. Cyclohexane is produced mainly by catalytic hydrogenation of benzene. The unreacted benzene is present in the reactor s effluent stream and must be removed for pure cyclohexane recovery. 

Blends of copolymers of styrene and acrylonitrile and butadiene and acrylonitrile called ABS plastics which are more ductile than polystyrene, are now used at an annual rate of almost 500 thousand tons. Terpoljrmers of styrene, acrylonitrile and maleic anhydride (Cadon) have heat deflection points above lOOOC.Q)While the physical properties of both ABS and the maleic anhydride terpolymers are superior to polystyrene, the improvements are not sufficient to classify them as high performance plastics. 

N nylon, PO polyolefin, elastomer, TPU thermoplastic urethane, GF glass fiber, NBR nitrile rubber, MAH maleic anhydride, EPR ethylene-propylene copolymer, l ionomer, M- mineral, ABS acrylonitrile-butadiene-styrene copolymer, PPE poly (phenylene ether), R reinforcement, PTFE poly(tetrafluoroethylene), CF° carbon fiber, PEBA poly(etherblockamide), S silicone, RIPP D reaction injection molding plastic, and ASA acrylate-styrene-acrylonitrile copolymer. 

---