Specific Methods

Many monomeric heterocyclic anhydrobases can be isolated now using specific methods (44), but application of these methods to thiazole ring did not succeed however, appropriate conditions lead to the separation of a dimer, the structure of which has been established by its NMR Spectra and chemical reactivity (26). The most probable mechanism of its formation appears identical with the one previously described in the benzothiazolium series (24). A second molecule of quaternary salt A3... 

Numerous tests covering flame retardancy and related matters are available. The requirements most often specified for fire resistance of a textile materials are that it must pass either Federal Specification Method 5903 or NFPA 701. 

Analytical methods iaclude thin-layer chromatography (69), gas chromatography (70), and specific methods for determining amine oxides ia detergeats (71) and foods (72). Nuclear magnetic resonance (73—75) and mass spectrometry (76) have also been used. A frequentiy used procedure for iadustrial amine oxides (77) iavolves titratioa with hydrochloric acid before and after conversion of the amine to the quaternary ammonium salt by reaction with methyl iodide. A simple, rapid quaHty control procedure has been developed for the deterrniaation of amine oxide and unreacted tertiary amine (78). 

There are four modes of radioactive decay that are common and that are exhibited by the decay of naturally occurring radionucHdes. These four are a-decay, j3 -decay, electron capture and j3 -decay, and isomeric or y-decay. In the first three of these, the atom is changed from one chemical element to another in the fourth, the atom is unchanged. In addition, there are three modes of decay that occur almost exclusively in synthetic radionucHdes. These are spontaneous fission, delayed-proton emission, and delayed-neutron emission. Lasdy, there are two exotic, and very long-Hved, decay modes. These are cluster emission and double P-decay. In all of these processes, the energy, spin and parity, nucleon number, and lepton number are conserved. Methods of measuring the associated radiations are discussed in Reference 2 specific methods for y-rays are discussed in Reference 1. 

More specific methods involve chromatographic separation of the retinoids and carotenoids followed by an appropriate detection method. This subject has been reviewed (57). Typically, hplc techniques are used and are coupled with detection by uv. For the retinoids, fluorescent detection is possible and picogram quantities of retinol in plasma have been measured (58—62). These techniques are particularly powerful for the separation of isomers. Owing to the thermal lability of these compounds, gc methods have also been used but to a lesser extent. Recently, the utiUty of cool-on-column injection methods for these materials has been demonstrated (63). 

ASTM standard -Butyl D 304-85 Isobutyl D 1719-86 j f-Butyl D 1007-85 Specification method... 

Union Carbide Specification Method (Butyraldehjde) 1B-4A4-Ii, June 1,1990. 

Alginate impression materials must have a compressive strength of at least 0.34 MPa (49 psi) 8 min after the start of the mix at least 3.5 min of this time interval should be in storage at 37 1°C. They should have a strain in compression of 4—20% between stresses of 9.8—98 kPa (1.42—14.2 psi) per specification method and they should not have a permanent deformation exceeding 3% after a 12% strain is appHed for 30 s. 

Solid-wa.ste-filling plan. The specific method of filling will depend on the characteristics of the site, such as the amount of available cover material, the topography, and local hydrology and geology. To assess future development plans, it will be necessary to prepare a detailed plan for the layout of the individual solid-waste cells. On the basis of the characteristics of the site or the method of operation (e.g., gas recovery), it may be necessaiy to incorporate special features for the control of the movement of gases and leachate from the landfill. 

A multitude of analysis techniques and models have been developed to aid in performing these four steps (Figure 7). Many references exist for specific methods, and several recent publications give specific advice and how to details for the various techniques. You will not have to select specific techniques—your QRA team will do that. But you must appreciate the types of results available from each class of techniques. 

Quality Assurance Handbook for Air Pollutant Measurement Systems/ Vol. Ill, "Stationary Source Specific Methods," EPA-600/4-77-027b. U.S. Environmental Protection Agency, Research Triangle Park, NC, 1977. 

Different available measurement instruments and evaluation methods are described in Chapter 12. Some specific methods to evaluate local ventilation systems are described in this section. All local ventilation systems should be evaluated regularly. The evaluation procedures can be divided into detailed and simple, as well as direct and indirect, procedures. The detailed procedures need special instruments and competence, whereas it should be possible to use the simple procedures every day. Since the simple procedures do not measure directly the performance of the exhaust, it is usually necessary to calibrate a simple procedure by using a detailed procedure. ... 

A solution of bismuth trioxide in hot glacial acetic acid provides a specific method for the oxidation of acyloins. " The reaction rate is dependent on the steric accessibility of the ketol system. A 2,3-ketol requires less than one hour for completion but an 11,12-ketol is not yet fully oxidized in thirty hours." The reaction is highly selective as a-keto acids, hydrazines and phenols are not oxidized. In a direct comparison with cupric acetate, this procedure is somewhat superior for the preparation of a 2,3-diketone from a 2-keto-3-hydroxy steroid. ... 

Having described the underlying philosophy of the traditional approach to accident prevention, we shall now discuss some of the specific methods that are used to implement it, namely motivational campaigns and disciplinary action and consider the evidence for their success. We shall also discuss another frequently employed strategy, the use of safety audits. 

Limit of Detection (LOD) The minimum concentration of a substance being measured that, in a given matrix and with a specific method, has a 99% probability of being identified, qualitatively or quantitatively measured, and reported to be greater than zero. 

In this chapter, we will consider the other half of a model chemistry definition the theoretical method used to model the molecular system. This chapter will serve as an introductory survey of the major classes of electronic structure calculations. The examples and exercises will compare the strengths and weaknesses of various specific methods in more detail. The final section of the chapter considers the CPU, memory and disk resource requirements of the various methods. 

Grunstein, M., and Hogness, D. S., 1975. Colony hybridization A specific method for the isolation of cloned DNAs tliat contain a specific gene. Proceedings of the National Academy of Sciences U.S.A. 72 3961—3965. Article describing die colony hybridization technique for specific gene isolation. 

A great number of N-substituted 4-hydroxy-3-nitro-l,8-naphthyridin-2 (IH)-ones are obtained by reaction of N-substituted azaisatoic anhydrides with ethyl nitroacetate carbanion (Section II,A,4,a). A very specific method, more recently developed, is that of the inverse Diels-Alder method, involving the reactions of enamines with 5-nitropyrimidine (Section II,A,4,b). 

Considering the numerous applications, heart-cut LC-LC has convincingly proven its value. Nevertheless, in LC-LC specific method development is generally needed for each analyte. Moreover, heart-cut procedures require accurate timing and, therefore, the performance of the first analytical column in particular should be highly stable to thus yield reproducible retention times. This often means that in LC-LC some kind of sample preparation remains necessary (see Table 11.1) in order to protect the first column from proteins and particulate matter, and to guarantee its lifetime. 

In as far as other analytical methods are concerned, many specific reactions have been elaborated for the quantitative determination of 2-deoxy aldoses. 2-Deoxy-D-ribose (2-deoxy-D-erythro-pentose), a compound which was recognized early as playing an important role in biological systems, has been of particular interest. Overend and Stacey (43) have given a critical review of the methods available until 1952 for the estimation of 2-deoxy pentoses. A recent summary of specific methods for the identification and quantitative estimation of the different classes of deoxy sugars has been prepared by Dische (13). 

The specific methods by which catalysts work are not clearly understood in most cases. Finding a catalyst suitable for a given reaction usually requires a long period... 

Whatever the method finally chosen for the required determination, it should ideally be a specific method that is to say, it should be capable of measuring the amount of desired substance accurately, no matter what other substances may be present. In practice few analytical procedures attain this ideal, but many methods are selective in other words, they can be used to determine any of a small group of ions in the presence of certain specified ions. In many instances the desired selectivity is achieved by carrying out the procedure under carefully controlled conditions, particularly with reference to the pH of the solution. 

Specific methods to separate tire amino acid required from its contaminant products, such as medium components and other amino adds, are proceeded by removal of the cells and proteineous material from the culture broth. 

Following cell and proteineous material removal, one or more specific methods of amino add recovery are applied. These are ... 

---