SOCIETY OF THE PLASTICS INDUSTRY

Recommended Practice for Acoustic Emission Testing of Fiberglass Tanks/Vessels", 1987, THE SOCIETY OF THE PLASTICS INDUSTRY (SPI)... [Pg.44]

J. G. Uhlman, Proceedings of the SPI 32nd AnnualTechnical Marketing Conference, San Francisco, Calif, Society of the Plastics Industry, New York, 1989,... [Pg.473]

Testing and Standards. Requirements for extmsion and mol ding grades are cited in ASTM specifications (79) and in Federal specification LP-389A of May 1964 (80). For fabricated shapes, FEP film and sheet are covered by Aeronautical Material Specifications (AMS) 3647 and LP-523 (81). Besides the specifications covered by the Fluorocarbons Division of the Society of the Plastics Industry, Inc. (82), other specifications are Hsted in Reference 83. [Pg.362]

Suggested Relative Hasard Classification of Organic Peroxides, Technical PubHcation, Organic Peroxide Producers Safety Division, The Society of the Plastics Industry, Inc., New York, 1992. [Pg.233]

Plastics Society of the Plastics Industry 355 Lexington Avenue New York, NY 10017 Refractories Refractories Institute Suite 1517 301 Fifth Avenue Pittsburgh, Pa. 15222... [Pg.25]

Production and Sales and Captive Use of Thermosetting and Thermoplastic Resins, Society of the Plastics Industry, Committee on Resiu Statistics, Ernst and... [Pg.423]

As a family of resins originally developed in the early twentieth century, the nature and potential of phenoHc resins have been explored thoroughly to produce an extensive body of technical Hterature (1 8). A symposium sponsored by the American Chemical Society commemorated 75 years of phenoHc resin chemistry in 1983 (9), and in 1987 the PhenoHc Mol ding Division of the Society of the Plastics Industry (SPI) sponsored a conference on phenoHcs in the twenty-first century (1). [Pg.292]

Nor is it tme that poly(ethylene terephthalate) (PET) and high density polyethylene (HDPE) packaging are hsted as 1 and 2 in the Society of the Plastics Industry (SPI) recycling coding system because they are the most recyclable. The numbers assigned to each plastic in the SPI coding system are purely arbitrary and do not redect the material s recyclabihty. [Pg.509]

Environmental Profile Facts Nbout the S afety of PNC Ndditives, rev. buU. The Viayl Institute, a Division of The Society of The Plastics Industry, Inc., Morristown, N.J., July 1993. [Pg.512]

W. W. Blount and co-workers, SFI Reinforced Flastics Composites Institute, Froceedings 27th Annual Conference, Eeb. 8—11, Society of the Plastic Industry, New York, 1972, Pt. 12-C. [Pg.263]

David B. Todd, Ph.D., President, Todd Engineering Member, American Association for the Advancement of Science (AAAS), American Chemical Society (ACS), American Institute of Chemical Engineering (AIChE), American Oil Chemists Society (AOCS), Society of Plastics Engineers (SPE), and Society of the Plastics Industry (SPI) Registered Professional Engineer, Miclii-gan (Section 18, Liquid-Solid Operations and Equipment)... [Pg.17]

ASTM and the Plastics Pipe Institute, a division of the Society of the Plastics Industry, have established identifications for plastic pipe in which the first group of letters identifies the plastic, the two following numbers identify the grade of that plastic, and the last two numbers represent the design stress in the nearest lower (0.7-MPa (lOO-lbfiin ) unit at 23°C (73.4°F). [Pg.979]

S. Z. Lu, 35th Annu. Tech. Conf. Reinforced Plastic/ Composite Institute, The Society of the Plastic Industry Inc., (1980). [Pg.837]

Recycling of unwanted polymers is the best solution, and six types of plastics in common use are frequently stamped with identifying codes assigned by the Society of the Plastics Industry (Table 31.2), After being sorted by type, the... [Pg.1218]

Plastics engineering handbook of the society of the plastics industry, inc. , 5th edition, Michael L. Berins (Editor) Chapman Hall (Kluwer Academic Publishers) (1991) ISBN 0412991810. Since 1947, the most comprehensive reference available on plastics processing methods,... [Pg.617]

Once a consumer has purchased a material made of a polymer, the likelihood of it being recycled is dramatically reduced. In the United States there are three resins that are commonly recycled polyethylene, polypropylene, and polyethylene terephthalate, SPI (The Society of the Plastics Industry) recycling codes, found on the bottom of food containers, provide the consumer with information as to the recyclability of the material. Table 17,1 lists these codes. [Pg.279]

Work referenced as conducted at Southwest Research Institute was supported under U. S. National Institute of Science and Technology Grant Nos. NB83NADA4015 and 60NANB6D0635, Federal Aviation Administration Contract No. DTFA03-81-00065 and by the Vinyl Institute of the Society of the Plastics Industry, Incorporated. Portions of this text are reprinted with permission from Advances in Combustion Toxicology, G.E. Hartzell, ed., Vol. 1, Technomic Lancaster, PA, 1988, p. 28-30. [Pg.18]

R.D. Bieniarz, Fire Experiments on Structural Foam Plastic Equipment Enclosures. Study for the Society of the Plastics Industry, Underwriters Laboratories, 1981. [Pg.309]

Society of Flavor Chemists, Inc., 11 563 Society of Rheology nomenclature, 21 704 Society of the Plastics Industry, The (SPI) on PVC recycling, 25 680 recycling coding system of, 25 681 Sociopolitical dimensions, of sustainable development, 24 189—190 Socks (mid-calf)... [Pg.854]

US,ENVIRONMENTAL PROTECTION AGENCY SOCIETY OF THE PLASTICS INDUSTRY US,FOOD DRUG ADMINISTRATION... [Pg.101]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...