Service life effects

The most effective specification is that which accomplishes the desired result with the fewest requirements. Properties and performance should be emphasized rather than how the objectives ate to be achieved. Excessive demonstration of emdition on the part of the writer or failure to recognize the usually considerable processing expertise held by the vendor results in a lengthy and overly detailed document that generally is counterproductive. Redundancy may lead to technical inconsistency. A requirement that cannot be assessed by a prescribed test method or quantitative inspection technique never should be included in the specifications. Wherever possible, tests should be easy to perform and highly correctable with service performance. Tests that indicate service life are especially useful. Standard test references, eg, ASTM methods, ate the most desirable, and those that ate needed should be selected carefully and the numbers of such references should be minimized. To eliminate unnecessary review activity by the would-be complier, the description of a standard test should not be paraphrased or condensed unless the original test is referenced. 

Durability. Grass-like surfaces intended for heavy-duty athletic use should have a service life of at least eight years, a common warranty period provided by suppHers. Lifetime is more or less proportional to the ultraviolet (uv) exposure (sunlight) and to the amount of face ribbon available for wear, but pile density and height also have an effect. Color is a factor generally uv absorption is highest with red fabrics and least with blue. In addition, different materials respond differendy to abrasive wear. These effects caimot be measured except in simulated field use and controlled laboratory experiments, which do not necessarily redect field conditions. 

As in dry compounding, acid acceptors must be incorporated into neoprene latices because of the wide use of these latices in coating fabrics and metals. The hydrochloric acid that forms during service life has a particularly destmetive effect on coated cotton fabrics that are not adequately protected. High zinc oxide concentration (ca 15 parts) and use of 0.4 parts AJ-phenyl-AT(p-toluenesulfonyl)-/)-phenylenediamine (Aranox, Uniroyal) as an antioxidant provides adequate protection. 

To discover the effective potential ranges for electrochemical protection, the dependence of the relevant corrosion quantities on the potential is ascertained in the laboratory. These include not only weight loss, but also the number and depth of pits, the penetration rate in selective corrosion, and service life as well as crack growth rate in mechanically stressed specimens, etc. Section 2.4 contains a summarized survey of the potential ranges for different systems and types of corrosion. Four groups can be distinguished ... 

With rubber base adhesives, it is necessary to prevent their properties from changing during service life. Oxidative changes induced by thermal, ozone exposure and UV light can dramatically affect service life of rubber base adhesives. More precisely, the rubber and the resin are quite susceptible to oxidative degradation. Environmental and physical factors exert detrimental effects on rubber base adhesive performance. These effects can be mitigated by the incorporation of low levels of stabilizers during the fabrication process of the adhesive. 

Most rubbers used in adhesives are not resistant to oxidation. Because the degree of unsaturation present in the polymer backbone of natural rubber, styrene-butadiene rubber, nitrile rubber and polychloroprene rubber, they can easily react with oxygen. Butyl rubber, however, possesses small degree of unsaturation and is quite resistant to oxidation. The effects of oxidation in rubber base adhesives after some years of service life can be assessed using FTIR spectroscopy. The ratio of the intensities of the absorption bands at 1740 cm" (carbonyl group) and at 2900 cm" (carbon-hydrogen bonds) significantly increases when the elastomer has been oxidized [50]. 

Free radicals are initially generated whenever polymer chains are broken and carbon radicals are formed. These effects occur during manufacture and in service life. Many elastomers are observed to oxidize at relatively low temperature (about 60°C), where carbon-hydrogen and carbon-carbon bond cleavages are highly unlikely. It has been demonstrated [52] that traces of peroxides impurities in the rubber cause low-temperature oxidation of rubber. These initiating peroxides are present in even the most carefully prepared raw rubber polymer [53]. 

Nutzdauer,/. useful life, service life, nutze, niitze, a. useful, of use, profitable. Nutzeffekt, m. useful effect, efficiency, effect, nutzen, v.t. use. — v.i. be of use. 

Basically, the purpose of drill collars is to furnish weight on bit. However, both size and length of drill collars have an effect on bit performance, hole deviation, and drill pipe service life. Drill collars may be classified according to the shape of their cross-sections as round drill collars (conventional drill collars), square drill collars, or spiral drill collars (drill collars with spiral grooves). 

During the service life of a well, tubing can experience various combinations of pressures and temperatures that result in tubing length changes. The four basic effects to consider are as follows ... 

Selection and care of the hydraulic fluid for a machine will have an important effect on how it performs and on the life of the hydraulic components. During the design of equipment that requires fluid power, many factors are considered in selecting the type of system to be used-hydraulic, pneumatic, or a combination of the two. Some of the factors required are speed and accuracy of operation, surrounding atmospheric conditions, economic conditions, availability of replacement fluid, required pressure level, operating temperature range, contamination possibilities, cost of transmission lines, limitations of the equipment, lubricity, safety to the operators, and expected service life of the equipment. 

There are, however, timber species of low natural durability which are impermeable and therefore cannot be effectively preserved. Such timbers can only be successfully used in dry situations. Likewise where preservative-treated timber is to be used in a situation of the highest hazard, long service life is best achieved by using easily treated species impregnated with a suitable preservative. Timber species that are difficult to treat can be incised to improve preservative penetration. 

Antioxidant agent Also called aging retardants. AOAs are of major importance to the plastic industry because they extend the plastic s (that are effected by oxygen) useful temperature range and service life during processing and/or product use. The variety of AOAs available and their specific uses are extensive. 

A central problem in complex materials systems of any kind involves testing to deteet flaws, analysis to predict their effect on remaining service life of the system, and repair strategies to overcome them. For the structural materials discussed in this chapter, these problems are uneharted territory in need of exploration by chemical engineers. 

The existence of asperity contacts in mixed lubrication causes great many local events and significant consequences. For example, the parameters describing lubrication and contact conditions, such as film thickness, pressure, subsurface stress, and surface temperature, fluctuate violently and frequently over time and space domain. It is expected that these local events would have significant effects on the service life of machine elements, but experimental measurements are difficult because of the highly random and time-dependent nature of the signals. Only a few successes were reported so far in experimental studies of mixed lubrication, mostly limited to the artificially manufactured... 

When the photostabilization of a polymer material is to be obtained through such a surface treatment process, it is all important to make sure that the protective effect will last throughout the service life and therefore to ensure a long-term adhesion of the coating onto the substrate. This can be best achieved by promoting a grafting reaction between the two elements (20). For that purpose, the photoinitiator was partly incorporated in the top layer of the PVC plate by a surface treatment with an acetone solution. Upon UV-irradiation of the resin-coated sample, the following reactions are expected to occur ... 

We consider that the practical electrode s efficiency at operation under high current density conditions and during service life is determined by the state of the particles of conductive additive s surface. With reference to this, we can point out two main factors effecting fundamentally reliable operation of the NiOx electrode. 

The effective service life of Air/PANI-Zn battery can be greater by several folds than that of conventional alkaline air-zinc batteries owing to the absence in principle of electrolyte carbonization (pH < 7). 

In a cost-benefit analysis, both costs and consequences are valued in dollars and the ratio of cost to benefit (or more commonly benefit to cost) is computed. Cost-benefit analysis has been used for many years to assess the value of investing in a number of different opportunities, including investments (or expenditure) for health care services. Cost-effectiveness analysis attempts to overcome (or avoid) the difficulties in cost-benefit analysis of valuing health outcomes in dollars by using nonmonetary outcomes such as life-years saved or percentage change in biomarkers like serum cholesterol levels. Cost-minimization analysis is a special case of cost-effectiveness analysis in which the outcomes are considered to be identical or clinically equivalent. In this case, the analysis defaults to selecting the lowest-cost treatment alternative. Cost-utility analysis is another special case of cost-effectiveness analysis in which the value of the outcome is adjusted for differences in patients preferences (utilities) for the outcomes. Cost-utility analyses are most appropriate when quality of life is a very important consideration in the therapeutic decision. 

Research and development in electrolysers and membranes is in progress to meet the requirement for large-scale electrolysers and higher current densities, and to resolve the questions relating to the effect of operation at 6 kA m-2 and higher on-membrane performance and service life, in contrast to the widely known performance and reliability as proven through many years of operation at 4 kA m-2. 

The object of this publication is to provide practical guidance on assessing the useful service life of plastics. It covers test procedures and extrapolation techniques together with the inherent limitations and problems. There is a wealth of information which can be applied to help maximise the effectiveness of a durability testing programme which the guide aims to direct the user towards. 

---