SELECT Transformations

As described in Chapter 2, in ISPS, IF operations are used for conditional branching, and DECODE operations are used for CASE-like decoding. Both of these operations are mapped onto the VT SELECT operation. This SELECT operation decodes a value (called a selector), and based on the decoded value chooses one of a set of alternate branches for execution associated with each branch is a set of activation values that must contain the selector for the branch to be chosen. At any given time, only a single branch of the SELECT can be active. 

The SELECT transformations allow the designer to interactively manipulate SELECTS and the operators surrounding them. Operators can be moved into and out of SELECTS, nested SELECTS can be combined, and SELECTS can be duplicated. 

The SELECT Combination transformation is applied interactively to combine two nested SELECTS into one SELECT, replacing the branch of the outer SELECT that contains the inner SELECT with all the branches of the inner SELECT and updating the branch activation values accordingly. Thus, only one decoding operation will be performed, rather than two sequential decoding operations. 

The first version, which concatenates the subfields, is more suitable for selectors with widely separated subfields to be decoded (for example, an instruction word with subfields separated by immediate operands). The second version, which uses the full value, is more suitable for selectors which are decoded completely, or for short selectors, where few 

SEILECT-to-SEUECT Transfer, SELECT Output Clostu  

---

How might you carry out the following selective transformations One of the two schemes requires a protection step. (Recall from Section 19.5 that aldehydes are more reactive than ketones toward nucleophilic addition.)... 

Pineschi and Feringa reported that chiral copper phosphoramidite catalysts mediate a regiodivergent kinetic resolution (RKR) of cyclic unsaturated epoxides with dialkylzinc reagents, in which epoxide enantiomers are selectively transformed into different regioisomers (allylic and homoallylic alcohols) [90]. The method was also applied to both s-cis and s-trans cyclic allylic epoxides (Schemes 7.45 and 7.46,... 

As zeohtes are known for their weU-defined micropore size and the associated ability to host shape-selective transformations, it is of distinct importance that the micropores in the hierarchical systems have the same size as those in the... 

Since their development in 1974 ZSM-5 zeolites have had considerable commercial success. ZSM-5 has a 10-membered ring-pore aperture of 0.55 nm (hence the 5 in ZSM-5), which is an ideal dimension for carrying out selective transformations on small aromatic substrates. Being the feedstock for PET, / -xylene is the most useful of the xylene isomers. The Bronsted acid form of ZSM-5, H-ZSM-5, is used to produce p-xylene selectively through toluene alkylation with methanol, xylene isomerization and toluene disproportionation (Figure 4.4). This is an example of a product selective reaction in which the reactant (toluene) is small enough to enter the pore but some of the initial products formed (o and w-xylene) are too large to diffuse rapidly out of the pore. /7-Xylene can, however. 

Saturated hydrocarbons are the main constituents of petroleum and natural gas. Mainly used as fuels for energy production they also provide a favorable, inexpensive feedstock for chemical industry [74]. Unfortunately, the inertness of alkanes renders their chemical conversion challenging with respect to selectivity. Clearly, the development of new and improved methods for the selective transformation of alkanes belongs to the central goals of catalysis. Iron-catalyzed processes might be a smart tool for such transformations (for reviews see [75-77]). 

Previous surface science studies showed that Rh is essential for NOx removal over TWC because NO dissociates more readily on metallic Rh than on Pt and Pd sites [26-28]. Nevertheless, the efficiency of Rh to selectively transform NO into N2 is restricted below the light-off temperature with a predominant formation of N20. Future practical developments are closely related to a better understanding of the formation and on the transformation of N20 over noble metals during the cold start engine. Such an aspect is still challenging over TWC and particularly under lean conditions since the extent in NO conversion is usually significantly lowered. 

Selective transformations Selective styrene ring opening [103] One-pot domino process for regioselective synthesis of a-carbonyl furans [104] Tandem process for synthesis of quinoxalines [105] Atmospheric oxidation of toluene [106] Cyclohexane oxidation [107] Synthesis of imines from alcohols [108] Synthesis of 2-aminodiphenylamine [109] 9H-Fluorene oxidation [110] Dehydrogenation of ethane in the presence of C02 [111] Decomposition of methane [112] Carbon monoxide oxidation [113]... 

Combinatorial approach to unsymmetrically tiered macromolecules [214] is a brand new area of research which would allow dendrimerization of materials (e. g., glass, classical polymers, fibers) and thus enable fine tuning of macromole-cular properties. For example, treatment of an amine terminated dendrimer with a mixture of complementary, isocyanate-based monomers [215, 216] affords a heterogeneous surfaced dendrimer. Selective transformation of the surface nitrile moieties via metal-catalyzed reduction to obtain a new polyamine dendrimer allows further combinatorial-based elaboration as illustrated in Fig. 42. 

In recent years, the importance of aliphatic nitro compounds has greatly increased, due to the discovery of new selective transformations. These topics are discussed in the following chapters Stereoselective Henry reaction (chapter 3.3), Asymmetric Micheal additions (chapter 4.4), use of nitroalkenes as heterodienes in tandem [4+2]/[3+2] cycloadditions (chapter 8) and radical denitration (chapter 7.2). These reactions discovered in recent years constitute important tools in organic synthesis. They are discussed in more detail than the conventional reactions such as the Nef reaction, reduction to amines, synthesis of nitro sugars, alkylation and acylation (chapter 5). Concerning aromatic nitro chemistry, the preparation of substituted aromatic compounds via the SNAr reaction and nucleophilic aromatic substitution of hydrogen (VNS) are discussed (chapter 9). Preparation of heterocycles such as indoles, are covered (chapter 10). 

Selective Transformations of Small Ring Compounds in Redox Reactions... 

The two articles in this current volume describe recent developments with small ring compounds which have not teen compiled in such a context before. T. Hirao discusses selective transformations initiated by transition derivatives in the construction of functionally substituted five-, six- and seven-membered rings as well as open-chair compounds. Cycloadditions onto methylene- and alkylidene-cyclopropane derivatives, described by A. Goti, F. M. Cordero and A. Brandi, not only yield products with spirocyclopropane moieties which can be desirable as such or as potential mimics of gem-dimethyl groupings, but also intermediates which can undergo further transformations with ring-opening of the cyclopropane units. 

Reductive and oxidative transformations of small ring compounds form the basis of a variety of versatile synthetic methods which include functionalization and carbon skeleton construction. Redox mechanisms of organotransition metal compounds play an important role in inducing or catalyzing specific reactions. Another useful route in this area is based on one-electron redox reactions. The redox tautomerism of dialkyl phosphonate also contributes to the efficiency of the reductive transformation of small ring compounds. This review summarizes selective transformations which have a high potential for chemical synthesis. 

This review surveys recent developments in the selective transformation of small ring compounds via redox reactions, which furnish a variety of valuable methods of synthesis. 

---