Ruthenium reduced

A number of researchers have now examined ruthenium-cobalt catalyzed methanol homologation to ethanol (60-62). Doyle concludes (56) that the ruthenium and cobalt moieties act independently, with the cobalt species responsible for the formation of 2-oxygenates like acetaldehyde and ruthenium reducing the aldehyde intermediate to ethanol. However, in our work - even with CO-rich syngas (8) -acetaldehyde is never more than a trace product. Mixed ruthenium-cobalt carbonyls are now well documented (56,62), but in these melt studies there is no direct spectroscopic evidence for their formation. 

Catalytic hydrogenation is mostly used to convert C—C triple bonds into C C double bonds and alkenes into alkanes or to replace allylic or benzylic hetero atoms by hydrogen (H. Kropf, 1980). Simple theory postulates cis- or syn-addition of hydrogen to the C—C triple or double bond with heterogeneous (R. L. Augustine, 1965, 1968, 1976 P. N. Rylander, 1979) and homogeneous (A. J. Birch, 1976) catalysts. Sulfur functions can be removed with reducing metals, e. g. with Raney nickel (G. R. Pettit, 1962 A). Heteroaromatic systems may be reduced with the aid of ruthenium on carbon. 

The most obvious way to reduce an aldehyde or a ketone to an alcohol is by hydro genation of the carbon-oxygen double bond Like the hydrogenation of alkenes the reac tion IS exothermic but exceedingly slow m the absence of a catalyst Finely divided metals such as platinum palladium nickel and ruthenium are effective catalysts for the hydrogenation of aldehydes and ketones Aldehydes yield primary alcohols... 

A ruthenium catalyst is particularly active for promoting this reaction. Organic compounds can also be reduced with hydrogen ... 

The residue, which contains Ir, Ru, and Os, is fused with sodium peroxide at 500°C, forming soluble sodium mthenate and sodium osmate. Reaction of these salts with chlorine produces volatile tetroxides, which are separated from the reaction medium by distillation and absorbed into hydrochloric acid. The osmium can then be separated from the mthenium by boiling the chloride solution with nitric acid. Osmium forms volatile osmium tetroxide mthenium remains in solution. Ruthenium and osmium can thus be separately purified and reduced to give the metals. 

Syntheses from Dry Metals and Salts. Only metaUic nickel and iron react direcdy with CO at moderate pressure and temperatures to form metal carbonyls. A report has claimed the synthesis of Co2(CO)g in 99% yield from cobalt metal and CO at high temperatures and pressures (91,92). The CO has to be absolutely free of oxygen and carbon dioxide or the yield is drastically reduced. Two patents report the formation of carbonyls from molybdenum and tungsten metal (93,94). Ruthenium and osmium do not react with CO even under drastic conditions (95,96). 

Ruthenium (IV) oxide [12036-10-1] M 133.1, d 6.97. Freed from nitrates by boiling in distilled water and filtering. A more complete purification is based on fusion in a KOH-KNO3 mix to form the soluble ruthenate and perruthenate salts. The melt is dissolved in water, and filtered, then acetone is added to reduce the ruthenates to the insoluble hydrate oxide which, after making a slurry with paper pulp, is filtered and ignited in air to form the anhydrous oxide [Campbell, Ortner and Anderson Anal Chem 33 58 1961]. 

Catalytic hydrogenation of tnfluoroacetic acid gives tnfluoroethanol in high yield [73], but higherperfluorocarboxybc acids and their anhydndes are reduced much more slowly over rhodium, iridium, platinum, or ruthenium catalysts [7J 74] (equation 61) Homogeneous catalysis efficiently produces tnfluoroethanol from tnfluoroacetate esters [75] (equation 61)... 

This is the second of the common oxidation states for iron and is familiar for ruthenium, particularly with Group 15-donor ligands (Ru probably forms more nitrosyl complexes than any other metal). Osmium(II) also produces a considerable number of complexes but is usually more strongly reducing than Ru". 

Ruthenium dioxide or ruthenium-on-carbon are effective catalysts for hydrogenation of mono- and dicarboxylic acids to the alcohol or glycol. High pressures (5,000-10,000 psig) and elevated temperatures (130-225 C) have been used in these hydrogenations 8,12,24). Yields of alcohol tend to be less than perfect because of esterification of the alcohol. Near quantitative yields of alcohol can be obtained by mixing ruthenium and copper chromite catalysts so as to reduce the ester as formed. 

In molecules containing both an acetylenic and a nitro function, either or both may be reduced. Preferential reduction of the acetylenic function is best achieved with palladium (42,44). Ruthenium, on the other hand, favors selective reduction of an aromatic nitro function high yields of (3-aminophenyljacetylene were obtained from the corresponding nitro compound. Catalyst life is prolonged by protection of the acetylenic function (70). Cobalt polysulffde and ruthenium sulffde catalysts have been used similarly, but more vigorous conditions are required (100°C, 25-70 atm) (71). 

Rhodium (2J) and ruthenium are excellent catalysts for the reduction of aromatic rings. It is with these catalysts that the best chance resides for preservation of other reducible functions (2,10,13,18,41,42,52). Rhodium (41) and ruthenium (45) each reduced methylphenylcarbinol to methylcyclohexyl-carbinol in high yield. Palladium, on the other hand, gives ethylbenzene quantitatively. Water has a powerful promoting effect, which is unique in ruthenium catalysis (36). 

Anilines have been reduced successfully over a variety of supported and unsupported metals, including palladium, platinum, rhodium, ruthenium, iridium, (54), cobalt, and nickel. Base metals require high temperatures and pressures (7d), whereas noble metals can be used under much milder conditions. Currently, preferred catalysts in both laboratory or industrial practice are rhodium at lower pressures and ruthenium at higher pressures, for both display high activity and relatively little tendency toward either coupling or hydrogenolysis,... 

The sequence has been applied to the synthesis of 1,4-cyclohexanedione from hydroquinone 10), using W-7 Raney nickel as prepared by Billica and Adkins 6), except that the catalyst was stored under water. The use of water as solvent permitted, after hltration of the catalyst, direct oxidation of the reaction mixture with ruthenium trichloride and sodium hypochlorite via ruthenium tetroxide 78). Hydroquinone can be reduced to the diol over /o Rh-on-C at ambient conditions quantitatively (20). 

If saturation occurs first, the product will be relatively stable toward further reduction but if hydrogenolysis occurs first, the resulting olefin is readily reduced. This ratio depends greatly on substrate structure, the catalyst, and environment. Hydrogenolysis is best achieved over platinum, whereas palladium (77a,82a,122bJ62a), rhodium (I09a), or ruthenium (I0a,I09a) tend to favor olefin saturation. 

Both amine oxides related to pyridines and aliphatic amine oxides (/25) are easily reduced, the former the more so. Pyridine N-oxide has been reduced over palladium, platinum, rhodium, and ruthenium. The most active was rhodium, but it was nonselective, reducing the ring as well. Palladium is usually the preferred catalyst for this type of reduction and is used by most workers 16,23,84 158) platinum is also effective 100,166,169). Katritzky and Monrol - ) examined carefully the selectivity of reduction over palladium of a... 

As described in U.S. Patent 3,025,292, the desired product may be made by hydrogenation of chlorothiazide. Three grams of 6-chloro-7-sulfamyl-1,2,4-benzothiadiazine-1,1-dioxide (chlorothiazide) is suspended in 100 ml of methanol. Then 1.0 gram of a 5% ruthenium on charcoal catalyst is added, and the mixture is reduced at room temperature and at an initial hydrogen pressure of 39 psig. The theoretical amount of hydrogen to form the 3,4-dihydro derivative is absorbed after a period of about 10 hours. 

The rhodium complexes are excellent catalysts for hydrogenation of NBR. At low temperature and pressure, high catalyst concentrations are used to obtain a better rate of reactions. Due to higher selectivity of the reaction, pressure and temperature can be increased to very high values. Consequently the rhodium concentration can be greatly reduced, which leads to high turnover rates. The only practical drawback of Rh complex is its high cost. This has initiated the development of techniques for catalyst removal and recovery (see Section VU), as well as alternate catalyst systems based on cheaper noble metals, such as ruthenium or palladium (see Sections IV.A and B). 

Fortunately, the oxidation of l,2 5,6-di-0-isopropylidene-a-D-glucofura-nose to l,2 5,6-di-0-isopropylidene-a-D-nfoo-hexofuranos-3-ulose (1) can be accomplished using either phosphorus pentoxide (10, 44) or acetic anhydride (10, 52) in methyl sulfoxide although this oxidation is effected with ruthenium tetroxide (6,7, 46), it is exceeding difficult with other oxidizing agents (53). Keto-sugar 1 is reduced stereospecifically... 

The most successful class of active ingredient for both oxidation and reduction is that of the noble metals silver, gold, ruthenium, rhodium, palladium, osmium, iridium, and platinum. Platinum and palladium readily oxidize carbon monoxide, all the hydrocarbons except methane, and the partially oxygenated organic compounds such as aldehydes and alcohols. Under reducing conditions, platinum can convert NO to N2 and to NH3. Platinum and palladium are used in small quantities as promoters for less active base metal oxide catalysts. Platinum is also a candidate for simultaneous oxidation and reduction when the oxidant/re-ductant ratio is within 1% of stoichiometry. The other four elements of the platinum family are in short supply. Ruthenium produces the least NH3 concentration in NO reduction in comparison with other catalysts, but it forms volatile toxic oxides. 

There is little data available to quantify these factors. The loss of catalyst surface area with high temperatures is well-known (136). One hundred hours of dry heat at 900°C are usually sufficient to reduce alumina surface area from 120 to 40 m2/g. Platinum crystallites can grow from 30 A to 600 A in diameter, and metal surface area declines from 20 m2/g to 1 m2/g. Crystal growth and microstructure changes are thermodynamically favored (137). Alumina can react with copper oxide and nickel oxide to form aluminates, with great loss of surface area and catalytic activity. The loss of metals by carbonyl formation and the loss of ruthenium by oxide formation have been mentioned before. 

To a solution of 4-t-butylcyclohexanone (lmmol), tris(triphenylphos-phine)ruthenium(n) chloride (0.05 mmol) and silver trifluoroacetate (0.05 mmol) in toluene (5 ml) was added triethylsilane (1.5 mmol). The mixture was heated under reflux for 20 h, and concentrated under reduced pressure. The residue was diluted with hexane (3 ml), filtered and distilled to give a mixture of triethylsilyl ethers (0.96mmol, 96%), b.p. 70°CI 0.1 mmHg. G.l.c. analysis shows an axial (cis) equatorial (trans) ratio of 5 95—a result comparable to the best LAH results. 

Polynuclear transition metal cyanides such as the well-known Prussian blue and its analogues with osmium and ruthenium have been intensely studied Prussian blue films on electrodes are formed as microcrystalline materials by the electrochemical reduction of FeFe(CN)g in aqueous solutionThey show two reversible redox reactions, and due to the intense color of the single oxidation states, they appear to be candidates for electrochromic displays Ion exchange properties in the reduced state are limited to certain ions having similar ionic radii. Thus, the reversible... 

Sheldon et al. have combined a KR catalyzed by CALB with a racemization catalyzed by a Ru(II) complex in combination with TEMPO (2,2,6,6-tetramethylpi-peridine 1-oxyl free radical) [28]. They proposed that racemization involved initial ruthenium-catalyzed oxidation of the alcohol to the corresponding ketone, with TEMPO acting as a stoichiometric oxidant. The ketone was then reduced to racemic alcohol by ruthenium hydrides, which were proposed to be formed under the reaction conditions. Under these conditions, they obtained 76% yield of enantiopure 1-phenylethanol acetate at 70° after 48 hours. 

A ruthenium complex [RuCl2(TPPTS)2]2 was used for regeneration of NADP+ to NADPH withhydrogen. Thus, 2-heptanonewas reduced with alcohol dehydrogenase from Thermoanaerobacter brockii in the presence of the mthenium complex, NAD P, and hydrogen at 60°C to (S)-2-heptanol in 40 % ee. Turnover number was reported to be 18 (Figure 8.6) [5cj. 

---