Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ribbing

The ribs on the reinforcing are distinguishable and can be measured, along with the diameter of the reinforcing with an estimated accuracy of about 10%. The upper part of the film is slightly overexposed causing less clear definition of the reinforcing bars. [Pg.1001]

Ribbed deck with ribs filled with fiber glass and sides perforated (Fig. 2). [Pg.313]

A special attribute of these processes is the abiHty to pre-position reinforcement, inserts, and core materials for stiffening ribs. Gel coatings can be apphed to the mold surface to eliminate post-mold finishing. Because both surfaces of the part are formed in a mold to close tolerances, accurate assemblies are possible, which is a requirement for many automotive or tmck body appHcations. [Pg.95]

Two subgrades of SMR 5 are SMR 5RSS and SMR 5ADS, which are prepared by direct baling of ribbed smoked sheet and air-dried sheet (ADS), respectively. [Pg.266]

TSR 5. Within the Malaysian scheme SMR 5 is restricted to mbber derived from sheet material prepared by conventional processes, ie, ribbed smoked sheet (RSS), air-dried sheet (ADS), and unsmoked sheet (USS) and presented in small bale form. Other countries may source different raw materials, eg, Indonesia produces SIR 5 from thin latex coagulum (14). SMR 5 prepared by pressing dry-sheet material into standard bales must be identified by the type of sheet material, eg, SMR 5RSS, on the test certificate as well as on the wrapping. [Pg.268]

Another PVC siding is an extmded product of an internally ribbed, dual-wall profile. A conventional screw extmder, with a vacuum sizer cooled with water and air, forms a product about 20 cm wide with 160 mm walls and 80 mm ribs on 25 cm centers. The total thickness is about 0.64 cm. The ribs provide rigidity and strength and the dual-wall constmction adds thermal insulation. No backing or core is used. [Pg.334]

In reverse-roU coating, as in forward-roU coating, instabilities can form. However, it is possible to obtain defect-free coatings at high speed and sometimes increasing the speed can lead to a smooth coating when a ribbing condition is present. [Pg.309]


See other pages where Ribbing is mentioned: [Pg.63]    [Pg.66]    [Pg.308]    [Pg.359]    [Pg.546]    [Pg.854]    [Pg.861]    [Pg.206]    [Pg.494]    [Pg.469]    [Pg.446]    [Pg.494]    [Pg.204]    [Pg.314]    [Pg.314]    [Pg.319]    [Pg.52]    [Pg.406]    [Pg.157]    [Pg.450]    [Pg.186]    [Pg.254]    [Pg.293]    [Pg.231]    [Pg.265]    [Pg.266]    [Pg.266]    [Pg.266]    [Pg.266]    [Pg.409]    [Pg.412]    [Pg.142]    [Pg.187]    [Pg.78]    [Pg.125]    [Pg.126]    [Pg.576]    [Pg.578]    [Pg.335]    [Pg.336]    [Pg.304]    [Pg.308]    [Pg.308]   
See also in sourсe #XX -- [ Pg.317 ]

See also in sourсe #XX -- [ Pg.22 , Pg.28 , Pg.64 , Pg.76 ]

See also in sourсe #XX -- [ Pg.446 ]




SEARCH



And ribs

Backweb, Ribs, and Overall Thickness

Bucket handle ribs

Capsule 8-ribbed

Cervical ribs

Design of Ribbed Sections

Designs positive ribs

Exhalation dysfunctions , ribs

Fabrication positive ribs

First Rib

Flattened ribbed cells

Floating ribs

Fused ribs

Helically ribbed tubes

Kinked ribs

Knurling/ribbing

Malaysian ribbed smoked sheet

Ma’rib

Mussel Ribbed, Geukensia demissa

Natural rubber ribbed smoked sheet

Negative ribs

Polyethylene cross-ribs

Positive ribs

Rib cage

Rib design

Rib fractures

Rib surface

Rib-raising techniques

Ribbed amine

Ribbed bars

Ribbed mussels

Ribbed smoked sheet

Ribbed steel

Ribbed substituent

Ribbed surfaces

Ribbed tape

Ribbed tubes

Ribbing instability

Ribs

Ribs

Ribs -patient

Ribs Still techniques

Ribs counterstrain technique

Ribs elevated

Ribs elevation

Ribs exhalation

Ribs motion

Ribs motion testing

Ribs muscle energy techniques

Ribs palpation

Ribs patient seated

Ribs patient supine

Ribs posterior

Ribs pump handle

Ribs pump handle motion

Ribs raising

Ribs seated

Ribs structure

Ribs testing

Ribs thrusting technique

Ribs treatment

Ribs typical

Ribs, design considerations

Ribs, separators

Separators negative ribs

Separators positive ribs

Stiffening ribs

Still techniques posterior/exhalation rib

Structure positive ribs

Supernumerary rib

Support rib

Thickness of Section and Rib

Trays ribbed

Waveguides ribbed

Wavy ribs

© 2024 chempedia.info