Resolutions with esterases

In a more detailed study, the same esterase P. fluorescens) was again subjected to mutagenesis using the same mutator strain, but also by saturation mutagenesis at selected positions 133a). In addition to 3-phenylbutyric acid ethyl ester (27), 3-bromo-2-methyl-propionic acid methyl ester rac-31) was chosen for the hydrolytic kinetic resolution, with the WT PFE showing an E factor of 12 in favor of the (5)-32. 

While kinetic resolution with the help of lipases or esterases has seen the greatest success for the synthesis of enantiomerically pure amines, the same target can be reached by employing co-transaminases (co-TA) to reductively transaminate ketones to either (S)- or (K)-amines, depending on the transaminase. The reaction is shown in Figure 7.22 with acetophenone and (S)-transaminase as an example (Shin, 1998, 1999). 

An example for the application of enzymatic kinetic resolutions with high E values in natural product synthesis is the chemoenzymatic synthesis of the northern half of epothilones (also see Sect. 4.1). Various lipases and esterases could be found with outstanding enantioselectivity (up to >100) among these were lipase B from Candida antarctica, a lipase from Burkholderia cepacia, a lipase from Pseudomonas sp., and a lipase from Streptomyces diastochromogenes, all affording the desired (S)-configurated alcohol with >99% enantiomeric excess (Fig. 4) [65],... 

Dynamic Kinetic Resolutions with Lipases and Esterases... 

S)-Methyl-3-(benzoylamino)butanoate (S)-72 is also available by enzymatic resolution with pig liver esterase. Alkylation and amination were run on the racemic compounds. One example of electrophilic amination is reported starting from rac-72 which is doubly deprotonated with LDA at low temperature (-60 °C to -45 °C). The enolate intermediate adopts an (E) configuration. After treatment at -70 °C with DTBAD (1.2 equiv.) in THF, the product 73 is obtained with 96% yield and an excellent diastereoselectivity de > 99 % in favor of the anri-diastereomer (Scheme 34). The absolute configuration of the created stereogenic center was assigned by chemical correlation with the known anti-2,3-diaminobutanoic acid. 

Applications of enzymes in preparative chemistry is largely dominated by kinetic resolutions using esterases and lipases. Due to the ease of preparation of esterase catalytic antibodies from immunization with phosphonate transition state analogs, these represent the vast majority of catalytic antibodies prepared to date, even if it is not yet clear whether they will be competitive with currently available enzymes. 

Kinetic resolution with racemisation Enzymes versus whole organisms Desymmetrisation with lipases Immobilised enzymes in desymmetrisation Polymer-supported reagents and enzymes Effects of amines on lipases and esterases Other acylating enzymes Enzymatic Oxidation... 

While most methods for the synthesis of enantiomerically pure amines have employed kinetic resolution with the help of lipases or esterases, a method independent of kinetic resolution has been developed using the transamination of ketones catalyzed by co-transaminases ([Pg.880]

The kinetic resolution of key intermediates is probably the most common enzymatic transformation applied to the synthesis of GABOB. But-2-enoic acid was epoxidized to give racemic 6.48. Kinetic resolution with pig liver esterase led to a 30% isolated yield of 6.49 after its separation from unreacted ester. Reaction of 6.49 with ammonia opened the epoxide to give S-GABOB, 6.27b. 

One approach called enzymatic resolution, involves treating a racemic mixture with an enzyme that catalyzes the reaction of only one of the enantiomers Some of the most commonly used ones are lipases and esterases enzymes that catalyze the hydrol ysis of esters In a typical procedure one enantiomer of the acetate ester of a racemic alcohol undergoes hydrolysis and the other is left unchanged when hydrolyzed m the presence of an esterase from hog liver... 

Both saturated (50) and unsaturated derivatives (51) are easily accepted by lipases and esterases. Lipase P from Amano resolves azide (52) or naphthyl (53) derivatives with good yields and excellent selectivity. PPL-catalyzed resolution of glycidyl esters (54) is of great synthetic utiUty because it provides an alternative to the Sharpless epoxidation route for the synthesis of P-blockers. The optical purity of glycidyl esters strongly depends on the stmcture of the acyl moiety the hydrolysis of propyl and butyl derivatives of epoxy alcohols results ia esters with ee > 95% (30). 

Fipases and esterases are often used for Idnetic resolution of racemates, variously by hydrolysis, esterification, or transesterification of suitable precursors. Scheme 8.3-3 illustrates the principal for the resolution of a secondary alcohol by esterification with vinyl acetate. 

Figure 14.4 Resolution of methyl-5-chloro-2-isopropyl-4-pentenoate with PharmaPLE, a nonanimal-derived isoform of pig liver esterase. The corresponding 5-ester is used as intermediate for production of Aliskiren...

Figure 11, Double kinetic resolution using enzymes with opposite enantioselectivity. PPL, porcine pancreatic lipase PLE, pig liver esterase.

The resolution of a racemic substrate can be achieved with a range of hydrolases including lipases and esterases. Among them, two commercially available Upases, Candida antarctica lipase B (CALB trade name, Novozym-435) and Pseudomonas cepacia lipase (PCL trade name. Lipase PS-C), are particularly useful because they have broad substrate specificity and high enantioselectivity. They display satisfactory activity and good stability in organic media. In particular, CALB is highly thermostable so that it can be used at elevated temperature up to 100 °C. 

A typical example that illustrates the method concerns the lipase- or esterase-catalyzed hydrolytic kinetic resolution of rac-1-phenyl ethyl acetate, derived from rac-1-phenyl ethanol (20). However, the acetate of any chiral alcohol or the acetamide of any chiral amine can be used. A 1 1 mixture of labeled and non-labeled compounds (S)- C-19 and (f )-19 is prepared, which simulates a racemate. It is used in the actual catalytic hydrolytic kinetic resolution, which affords a mixture of true enantiomers (5)-20 and (J )-20 as well as labeled and non-labeled acetic acid C-21 and 21, respectively, together with non-reacted starting esters 19. At 50% conversion (or at any other point of the kinetic resolution), the ratio of (5)- C-19 to (1 )-19 correlates with the enantiomeric purity of the non-reacted ester, and the ratio of C-21 to 21 reveals the relative amounts of (5)-20 and (J )-20 (98). 

Esters are widespread in fruits and especially those with a relatively low molecular weight usually impart a characteristic fruity note to many foods, e.g. fermented beverages [49]. From the industrial viewpoint, esterases and lipases play an important role in synthetic chemistry, especially for stereoselective ester formations and kinetic resolutions of racemic alcohols [78]. These enzymes are very often easily available as cheap bulk reagents and usually remain active in organic reaction media. Therefore they are the preferred biocatalysts for the production of natural flavour esters, e.g. from short-chain aliphatic and terpenyl alcohols [7, 8], but also to provide enantiopure novel flavour and fragrance compounds for analytical and sensory evaluation purposes [12]. Enantioselectivity is an impor-... 

The resolution of racemic FTC butyrate (34) was required for the synthesis of the antiviral drug emtricitabine (Emtriva) (Scheme 7.15) a nucleoside reverse transcriptase inhibitor targeted for treatment of human immunodeficiency virus (HIV) and hepatitis infections [35]. The racemic FTC butyrate ester (34) was treated with immobilized cholesterol esterase, which cleaved the required isomer to the corresponding alcohol (-) 35 with 91% and 52% conversion [36]. The product was isolated as the hydrochloride salt to give 31% yield (98% ) from the 8 kg demonstration. The esterase was immobilized by precipitation onto an accurel polypropylene support using acetone followed by cross linking with glutaralde-... 

To assess the applicability of FTIR spectroscopy for determining ee values for a given substrate, especially with regard to accuracy, the best position at which isotopes are introduced needs to be determined. For illustration, the lipase- or esterase-catalyzed kinetic resolution of esters is considered here, although the method is not restricted to this type of reaction.13C labeling of carbonyl groups is ideal for several reasons ... 

---