Removable contamination,

Microbial leaching of metals from ores is a promising adjunct to more aggressive metal recovery technologies (77), but is generally achieved by oxidative processes that generate very acidic waters. It seems unlikely that similar approaches will be of much value in removing contaminant metals and metalloids from soils. 

Steps ia polypropylene recycling iaclude size reduction of grinding, washing, rinsing, and dryiag to remove contaminants and produce PP flakes... 

In case of physical contact with sulfuric acid, immediately flush eyes or skin with plenty of water for at least 15 min while removing contaminated clothing and shoes. Call a physician. Wash clothing before reuse and destroy contaminated shoes. 

Common membrane processes include ultrafiltration (UF), reverse osmosis (RO), electro dialysis (ED), and electro dialysis reversal (EDR). These processes (with the exception of UF) remove most ions RO and UF systems also provide efficient removal of nonionized organics and particulates. Because UF membrane porosity is too large for ion rejection, the UF process is used to remove contaminants, such as oil and grease, and suspended soHds. 

For handling chi orohydrin s, chemical safety goggles, chemical-resistant gloves, OSHA/MSHA approved respirators, and other protective clothing are required. In case of contact, one should immediately flush eyes or skin with copious amounts of water for at least 15 minutes and remove contaminated clothing and shoes. If inhaled, the person should be moved to fresh air (72). 

Surface preparation, always important in obtaining optimal coatings performance, is critical for marine coatings (see Metal surface treatments). Surface preparation usually comprises about half of the total coating costs, and if inadequate may be responsible for early coating failure. Proper surface preparation includes cleaning to remove contaminants and roughening the surface to faciUtate adhesion. 

Adsorption and Desorption Adsorbents may be used to recover solutes from supercritical fluid extracts for example, activated carbon and polymeric sorbents may be used to recover caffeine from CO9. This approach may be used to improve the selectivity of a supercritical fluid extraction process. SCF extraction may be used to regenerate adsorbents such as activated carbon and to remove contaminants from soil. In many cases the chemisorption is sufficiently strong that regeneration with CO9 is limited, even if the pure solute is quite soluble in CO9. In some cases a cosolvent can be added to the SCF to displace the sorbate from the sorbent. Another approach is to use water at elevated or even supercritical temperatures to facilitate desorption. Many of the principles for desorption are also relevant to extraction of substances from other substrates such as natural products and polymers. 

Maybe used to produce vacuum to remove contaminants from process Disadvantages... 

Use emergency shower, removing contaminated clothing and shoes at the same time... 

Control exposures by engineering techniques, e.g. containment, shielding, ventilation (consider need for in-duct filters to remove contamination prior to exhausting to atmosphere), backed up by systems of work and personal protection including approved respirators where necessary. 

Certain refinery wastewater streams are treated separately, prior to the wastewater treatment plant, to remove contaminants that would not easily be treated after mixing with other wastewater. One such waste stream is the sour water drained from distillation reflux drums. Sour water contains dissolved hydrogen sulfide and other organic sulfur compounds and ammonia which are stripped in a tower with gas or steam before being discharged to the wastewater treatment plant. 

Ventilation equipment can be used to isolate or remove contaminants by controlling pressure relationships. If the contaminant source has been identified, this strategy can be more effective than dilution. Techniques for controlling air pressure relationships range from adjustment of dampers to installation of local exhaust. 

Will you need to filter the waste stream to remove contaminants that would clog the activated carbon adsorbent ... 

Semidry Scrubbers The advantage of semidry scrubbers is in that they remove contaminants by way of a solid waste that is easier to dispose of (less expensive). Initially, the scrubbing medium is wet (such as a lime or soda ash slurry). Then a spray dryer is used to atomize the slurry into the gas which evaporates the water in the droplets. As this takes place, the acid in the gas neutralizes the alkali material and forms a fine white solid. Most of the white solids are removed at the bottom of the scrubber while some are carried into the gas stream and have to be removed by a filter or electrostatic precipitator (discussed later). Although semidry systems cost 5-15% more than wet systems, when combined with a fabric filter, they can achieve 90-95% efficiencies. Dry scrubbers are sometimes used in a very similar fashion, but without the help of gas-liquid-solid mass transfer, these systems use much higher amounts of the solid alkali materials. 

Technology Description In-situ chemical treatment uses the same principles employed for above-ground chemical processes. Materials are added to neutralize, oxidize or remove contaminants in groundwater or soils in order to avoid digging or pumping of the contaminated waste above ground for... 

Excavating and removing contaminated soil from the PCP/oil spill path and from the farm pond bottom ... 

---