Protection Personal protective equipment

This book covers major environmental and training regulations, chemical properties tit hazardous materials, toxicology, engineering controls, respiratory protection, personal protective equipment drum management, air monitoring, sampling, and decontamination. [Pg.113]

Personal protection equipment. Depending on the hazardous properties of the chemicals and the risks to health, it may be necessary for certain activities to use gloves and eye and respiratory protection. Personal protection equipment... [Pg.297]

Occupational Health — Diesel Exhaust PPE — Hand Protection Personal Protective Equipment — Hand Protection Alternate Hand signals see Signals ... [Pg.962]

Electric shock protection.Personal protective equipment-35... [Pg.719]

Ear muffs need to make a perfect seal around the ear to be effective. Glasses, long sideburns, long hair, and facial movements such as chewing, can reduce protection. Personal protective equipment should be provided and must be used if feasible engineering controls fail to reduce sound levels to the levels specified by Title 29 CFR 1910.95—Occupational Noise Exposure. [Pg.82]

In view of the above, aniline should be handled in areas with adequate ventilation and skin exposure should be avoided by wearing the proper safety equipment. Recommended personal protective equipment includes hard hat with brim, chemical safety goggles, hiU length face shield, mbber gaundet gloves, mbber apron, and mbber safety shoes or mbber boots worn over leather shoes. [Pg.233]

Included ia the OSHA regulations are standards for safe work practices such as lock-out/tag-out and confined space entry, personal protective equipment, storage of hazardous materials, welding process, forklift operation, and requirements for fire protection. Basically, all activities within a chemical facihty are covered by OSHA standards. [Pg.80]

Occupational Safety and Health. OSHA has set no specific limits for sodium and potassium sibcates (88). A pmdent industrial exposure standard could range from the permissible exposure limit (PEL) for inert or nuisance particulates to the PEL for sodium hydroxide, depending on the rate of dissolution and the concentration of airborne material. Material safety data sheets issued by siUcate producers should be consulted for specific handling precautions, recommended personal protective equipment, and other important safety information. [Pg.11]

Personal Protective Equipment. Personal protective and emergency safety equipment should not be reHed on as the primary protection from aHyl chloride. Prevention of exposure should be considered the preferred precautionary measure. Where the exposure guideline may be gready exceeded, an approved positive-pressure air suppHed or self-contained breathing apparatus with fuH facepiece should be used (51). [Pg.35]

A concentration of 35,000 ppm in air produces unconsciousness in 30—40 minutes. This concentration also constitutes a serious fire and explosion hazard, and should not be permitted to exist under any circumstance. Any person exposed to ethyl ether vapor of any appreciable concentration should be prompdy removed from the area. Recovery from exposure to sublethal concentrations is rapid and generally complete. Except in emergencies, and then only with appropriate protective equipment, no one should enter an area containing ether vapor until the concentration has been found safe by measurement with a combustible-gas indicator. [Pg.428]

Emergency response On-site communications Emergency shutdown equipment and procedures Site evacuation Safe havens Personal protective equipment Medical treatment On-site emergency plans, procedures, training, aud drills... [Pg.2341]

Use personal protective equipment Provide sufficient bottled air/SCBA Develop emergency response procedures Develop appropriate evacuation plans... [Pg.33]

Sampling spills. Wear proper personal protective equipment (PPE) Follow proper sampling procedures Use safe sampling design CCPS G-22 CCPS G-23 CCPS G-29 Lovelace 1979... [Pg.88]

Material solidifies Monitor and control temperature in feed system or is too viscous, Heat trace and/or insulate lines and plugs lines. Potential for proper line break procedures exposure while Use personal protective equipment (PPE) correcting, proper lockout-tagout and confined space problem. entry procedures CCPS G-23 CCPS G-29 Fisher 1990... [Pg.95]

Where product is exposed at transitions or packing operations use containment devices such as gloveboxes provide airflow control (laminar flow booths) or as a last resort use the room as containment and provide suitable personal protective equipment for the operators... [Pg.99]

Physical stress induced by Personal Protection Equipment (PPE). [Pg.137]

Where possible design process and/or restructure job/tasks to reduce need for personal protection equipment (PPE)... [Pg.137]

Degradation of personal protection equipment (PPE) between uses. [Pg.138]

A list of required and suggested personal protective equipment... [Pg.43]

Did any chemical used/produced m the process require use of special personal protective equipment (PPE) when handling ... [Pg.148]

Are material handling systems engineered and/ or personal protective equipment used to prevent physical exposure to personnel, including inhalation and skin ... [Pg.163]

Is required personal protective equipment easily and readily available and worn by personnel during manufacturing and packaging operations ... [Pg.163]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...