Propylene, properties

DV Ivanjukov, ML Fridman (ed.). Propylene. Properties and Application, Russian ed. Moskow Khimija, 1974, p 73. 

CH3 CH0H CH20H, a colourless, almost odourless liquid. It has a sweet taste, but is more acrid than ethylene glycol b.p. 187. Manufactured by heating propylene chlorohydrin with a solution of NaHCO under pressure. It closely resembles dihydroxyethane in its properties, but is less toxic. Forms mono-and di-esters and ethers. Used as an anti-freeze and in the preparation of perfumes and flavouring extracts, as a solvent and in... 

It resembles polytetrafiuoroethylene and fiuorinated ethylene propylene in its chemical resistance, electrical properties, and coefficient of friction. Its strength, hardness, and wear resistance are about equal to the former plastic and superior to that of the latter at temperatures above 150°C. 

Properties ethylene-propylene resin Poly(vinylidene fluoride) Unfilled Glass-fiber- reinforced ethylene copolymer Cellulose- filled Glass-fiber- reinforced... 

Table 4 Hsts various physical and chemical properties and constants for the propylene glycols. A comprehensive source for additional physical and chemical properties is Reference 25.

Aqueous solutions of propylene glycol display excellent antifree2e properties and are therefore valuable as low temperature heat-transfer fluids. For apphcations involving indirect food contact, heat-transfer fluids formulated with the USP grade product are preferred, since there could be inadvertent contact with a food product. These fluids are commonly used in the brewing and dairy industries as well as in refrigerated display cases in retail grocery stores. 

Blends of piperylenes and amylenes (mixed 2-methyl-1-butene and 2-methyl-2-butene) or UOP propylene dimers can be adjusted to produce softening points of 0—100°C and weight average molecular weights of <1200 (32,33). Careful control of the diolefin/branched olefin ratio is the key to consistent resin properties (34). 

Isoprene [78-79-5] (2-methyl-1,3-butadiene) is a colorless, volatile Hquid that is soluble in most hydrocarbons but is practically insoluble in water. Isoprene forms binary azeotropes with water, methanol, methylamine, acetonitrile, methyl formate, bromoethane, ethyl alcohol, methyl sulfide, acetone, propylene oxide, ethyl formate, isopropyl nitrate, methyla1 (dimethoxymethane), ethyl ether, and / -pentane. Ternary azeotropes form with water—acetone, water—acetonitrile, and methyl formate—ethyl bromide (8). Typical properties of isoprene are Hsted in Table 1. 

Interest has been generated by the advances made in the homogeneously cataly2ed polymerisation of propylene using metallocenes (10). Polymers produced with these catalyst systems have an unusual balance of properties that may become commercially attractive. 

Polypropylene polymers are typically modified with ethylene to obtain desirable properties for specific applications. Specifically, ethylene—propylene mbbers are introduced as a discrete phase in heterophasic copolymers to improve toughness and low temperature impact resistance (see Elastomers, ETHYLENE-PROPYLENE rubber). This is done by sequential polymerisation of homopolymer polypropylene and ethylene—propylene mbber in a multistage reactor process or by the extmsion compounding of ethylene—propylene mbber with a homopolymer. Addition of high density polyethylene, by polymerisation or compounding, is sometimes used to reduce stress whitening. In all cases, a superior balance of properties is obtained when the sise of the discrete mbber phase is approximately one micrometer. Examples of these polymers and their properties are shown in Table 2. Mineral fillers, such as talc or calcium carbonate, can be added to polypropylene to increase stiffness and high temperature properties, as shown in Table 3. 

Random insertion of ethylene as comonomer and, in some cases, butene as termonomer, enhances clarity and depresses the polymer melting point and stiffness. Propylene—butene copolymers are also available (47). Consequendy, these polymers are used in apphcations where clarity is essential and as a sealant layer in polypropylene films. The impact resistance of these polymers is sligbdy superior to propylene homopolymers, especially at refrigeration temperatures, but still vastiy inferior to that of heterophasic copolymers. Properties of these polymers are shown in Table 4. 

The physical properties of finish removers vary considerably due to the diverse uses and requirements of the removers. Finish removers can be grouped by the principal ingredient of the formula, method of appHcation, method of removal, chemical base, viscosity, or hazardous classification. Except for method of apphcation, a paint remover formulation usually has one aspect of each group, by which it can be used for one or more appHcations. A Hst of the most common organic solvents used in finish removers has been compiled (3). Many are mentioned throughout this article others include ethyl lactate [97-64-3] propylene carbonate [108-32-7] furfural alcohol [98-01-1/, dimethyl formamide [68-12-2] tetrahydrofuran [109-99-9] methyl amyl ketone [110-43-0] dipropylene glycol methyl ether [34590-94-8] and Exxate 600, a trade name of Exxon Chemicals. 

Uses. About 35% of the isophthahc acid is used to prepare unsaturated polyester resins. These are condensation products of isophthahc acid, an unsaturated dibasic acid, most likely maleic anhydride, and a glycol such as propylene glycol. The polymer is dissolved in an inhibited vinyl monomer, usually styrene with a quinone inhibitor. When this viscous hquid is treated with a catalyst, heat or free-radical initiation causes cross-linking and sohdification. A range of properties is possible depending on the reactants used and their ratios (97). 

Di-2-EthylhexylPhthalate. In Western Europe, di-2-ethylhexyl phthalate [117-81-7] (DEHP), also known as dioctyl phthalate (DOP), accounts for about 50% of all plasticizer usage and as such is generally considered as the industry standard. The reason for this is that it is in the mid-range of plasticizer properties. DEHP (or DOP) is the phthalate ester of 2-ethyIhexanol, which is normally manufactured by the dimerization of butyraldehyde (eq. 2), the butyraldehyde itself being synthesized from propylene (see Butyraldehydes). 

The properties of polymers formed by the step growth esterification (1) of glycols and dibasic acids can be manipulated widely by the choice of coreactant raw materials (Table 1) (2). The reactivity fundamental to the majority of commercial resins is derived from maleic anhydride [108-31-6] (MAN) as the unsaturated component in the polymer, and styrene as the coreactant monomer. Propylene glycol [57-55-6] (PG) is the principal glycol used in most compositions, and (i9f2v (9)-phthahc anhydride (PA) is the principal dibasic acid incorporated to moderate the reactivity and performance of the final resins. 

Acrylonitrile—Butadiene—Styrene. ABS is an important commercial polymer, with numerous apphcations. In the late 1950s, ABS was produced by emulsion grafting of styrene-acrylonitrile copolymers onto polybutadiene latex particles. This method continues to be the basis for a considerable volume of ABS manufacture. More recently, ABS has also been produced by continuous mass and mass-suspension processes (237). The various products may be mechanically blended for optimizing properties and cost. Brittle SAN, toughened by SAN-grafted ethylene—propylene and acrylate mbbets, is used in outdoor apphcations. Flame retardancy of ABS is improved by chlorinated PE and other flame-retarding additives (237). 

Ideal gas properties and other useful thermal properties of propylene are reported iu Table 2. Experimental solubiUty data may be found iu References 18 and 19. Extensive data on propylene solubiUty iu water are available (20). Vapor—Hquid—equiUbrium (VLE) data for propylene are given iu References 21—35 and correlations of VLE data are discussed iu References 36—42. Henry s law constants are given iu References 43—46. Equations for the transport properties of propylene are given iu Table 3. 

Propylene is a colorless gas under normal conditions, has anesthetic properties at high concentrations, and can cause asphyxiation. It does not irritate the eyes and its odor is characteristic of olefins. Propjiene is a flammable gas under normal atmospheric conditions. Vapor-cloud formation from Hquid or vapor leaks is the main ha2ard that can lead to explosion. The autoignition temperature is 731 K in air and 696 K in oxygen (80). Evaporation of Hquid propylene can cause skin bums. Propylene also reacts vigorously with oxidising materials. Under unusual conditions, eg, 96.8 MPa (995 atm) and 600 K, it explodes. It reacts violentiy with NO2, N2O4, and N2O (81). Explosions have been reported when Hquid propylene contacts water at 315—348 K (82). Table 8 shows the ratio TJTp where is the initial water temperature, and T is the superheat limit temperature of the hydrocarbon. 

Propylene oxide is a colorless, low hoiling (34.2°C) liquid. Table 1 lists general physical properties Table 2 provides equations for temperature variation on some thermodynamic functions. Vapor—liquid equilibrium data for binary mixtures of propylene oxide and other chemicals of commercial importance ate available. References for binary mixtures include 1,2-propanediol (14), water (7,8,15), 1,2-dichloropropane [78-87-5] (16), 2-propanol [67-63-0] (17), 2-methyl-2-pentene [625-27-4] (18), methyl formate [107-31-3] (19), acetaldehyde [75-07-0] (17), methanol [67-56-1] (20), ptopanal [123-38-6] (16), 1-phenylethanol [60-12-8] (21), and / /f-butanol [75-65-0] (22,23). 

---