Fluorinated ethylene propylene electrical properties

It resembles polytetrafluoroethylene and fluorinated ethylene propylene in its chemical resistance, electrical properties, and coefficient of friction. Its strength, hardness, and wear resistance are about equal to the former plastic and superior to that of the latter at temperatures above 150°C. 

More recently, modified fluoroplastics such as fluorinated ethylene/propylene copolymer, polychlorotrifluoroethylene, and polyvinylidene fluoride have been offered by DuPont, Allied Chemical, 3M, and Pennwalt respectively, to provide improved processability and mechanical strength at some sacrifice in heat-resistance, electrical properties, and chemical resistance and at prices of 3.70-7.15 these have also been finding appropriate if smaller markets. 

Examples of fluoroplastics include polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), ethylene—chlorotrifluoroethylene (ECTFE), ethylene—tetrafluoroethylene (ETFE), poly(vinylidene fluoride) (PVDF), etc (see Fluorine compounds, organic). These polymers have outstanding electrical properties, such as low power loss and dielectric constant, coupled with very good flame resistance and low smoke emission during fire. Therefore, in spite of their relatively high price, they are used extensively in telecommunication wires, especially for production of plenum cables. Plenum areas provide a convenient, economical way to run electrical wires and cables and to interconnect them throughout nonresidential buildings (14). Development of special flame-retardant low smoke compounds, some based on PVC, have provided lower cost competition to the fluoroplastics for indoors application such as plenum cable, Riser Cables, etc. 

PVDF is the third most widely used fluoropolymer, after polytetrafluoroethylene (PTFE) and fluorinated ethylene-propylene (FEP). The worldwide consumption of PVDF was approximately 15,000 metric tons in 2001 and is growing at an annual rate of 6-8%. PVDF applications have been expanded over the past 40 years because of its unique physical properties, and have over 30 years of proven and field performance data on thermal, chemical, radiation, and weathering applications. PVDF applications include, but are not limited to, chemical processing of pipes and components, semiconductor, architectural finishes and coatings, electrical plenum, cable jacketing. 

It can be seen in Table 4.3 that electrical properties cover a wide range and thus the volume resistivity of various polymers is between 2 ohm.cm for epoxy resins to 10 ohm.cm for fluorinated ethylene-propylene copolymer. Similarly, dielectric strength is in the range from 12 mV/m for urea-formaldehyde resins to 55 mV/m for fluorinated ethylene-propylene copolymer and 60 mV/m for PA 12. 

---