Procedure ablation

EXPERIMENTAL PROCEDURE Ablation/Thermal Shock Equipment... 

The equivalent procedure for the main olfactory epithelial sheet (MOEx) is chemical ablation by treatment with (5%) zinc sulphate solution. The adoption of this approach was determined by practical anatomy, given the inevitably partial, let alone traumatic, results of cutting/scraping epithelia from the intricately folded sensory surfaces (Negus, 1958). 

Radiofrequency catheter ablation Procedure during which radiofrequency energy is delivered through a catheter positioned at the atrioventricular node of the heart for the purpose of destroying one pathway of a reentrant circuit. 

Nondestructive radiation techniques can be used, whereby the sample is probed as it is being produced or delivered. However, the sample material is not always the appropriate shape or size, and therefore has to be cut, melted, pressed or milled. These handling procedures introduce similar problems to those mentioned before, including that of sample homogeneity. This problem arises from the fact that, in practice, only small portions of the material can be irradiated. Typical nondestructive analytical techniques are XRF, NAA and PIXE microdestructive methods are arc and spark source techniques, glow discharge and various laser ablation/desorption-based methods. On the other hand, direct solid sampling techniques are also not without problems. Most suffer from matrix effects. There are several methods in use to correct for or overcome matrix effects ... 

Prochazka M., Mojzes P., Stepanek J., Vlckova B., Turpin P.Y., Probing applications of laser ablated Ag colloids in SERS spectroscopy Improvement of ablation procedure and SERS spectral testing, Anal. Chem. 1997 69 5103-5108. 

In developed countries, ablative procedures have largely been replaced by DBS, because the latter are equally effective or somewhat superior to ablation, are less invasive, and are reversible and adjustable. In addition, bilateral pallidal lesions have an increased risk of causing speech and swallowing dysfunction, while bilateral DBS procedures can be done without significantly increased risk. However, the stimulators require battery replacements, are prone to mechanical lead difficulties and sometimes require frequent adjustment of stimulation parameters. 

FIGURE 6-2. Algorithm for the treatment of acute (top portion) paroxysmal supraventricular tachycardia and chronic prevention of recurrences (bottom portion). Note For empiric bridge therapy prior to radiofrequency ablation procedures, calcium channel blockers (or other atrioventricular [AV] nodal blockers) should not be used if the patient has AV reentry with an accessory pathway. (AAD, antiarrhythmic drugs AF, atrial fibrillation AP, accessory pathway AVN, atrioventricular nodal AVNRT, atrioventricular nodal reentrant tachycardia AVRT, atrioventricular reentrant tachycardia DCC, direct-current cardioversion ECG, electrocardiographic monitoring EPS, electrophysiologic studies PRN, as needed VT, ventricular tachycardia.)... 

The laser ablation inductively coupled plasma atomic emission spectrometry procedure described by Arrowsmith [127] discussed in section 12.10.2.4 has been applied to the determination of down to 0.2pg gy1 of antimony in sediments. 

The examinations are performed in real time and can visualize motion (30 frames per second or even more) respectively, needle biopsies and tissue ablation procedures are often performed under the guidance of ultrasound imaging. 

Other clinical uses for the gonadal suppression provided by continuous GnRH agonist treatment include advanced breast and ovarian cancer thinning of the endometrial lining in preparation for an endometrial ablation procedure in women with dysfunctional uterine bleeding and treatment of amenorrhea and infertility in women with polycystic ovary disease. 

Calibration and quantification procedures are easier in LA-ICP-MS compared to other solid-state mass spectrometric techniques because the laser ablation and the ICP ion source operate at normal pressure and the laser ablation of solid samples and ionization of analytes are separated in space and time. Therefore the advantage of solution calibration in ICP-MS can be applied in this solid-state analytical technique. The introduction of solution based calibration, which is only possible in LA-ICP-MS, was an innovative step in the development of this sensitive mass spectrometric technique. A number of different calibration approaches using aqueous standard solutions in the dual gas flow technique have been discussed by various authors.74 75 In the dual gas flow injection technique , the nebulized standard solution and the laser ablated sample material are mixed in the -piece and the two gas flows from the nebulizer (e.g. ultrasonic nebulizer) and laser ablation chamber are added. Using solution based calibration with the addition of a standard solution, Leach et alP determined minor elements in steel reference materials with a relative accuracy of a few %. In comparison to the so-called dual gas flow technique proposed in the literature, where the argon flow rates through the nebulizer and ablation cell add up to 11 min-1 (e.g. 0.451 min-1 and... 

An analytical procedure has been proposed for precise uranium isotope ratio measurements in a thin uranium layer on a biological surface by LA-ICP-MS using a cooled laser ablation chamber.125 One drop of uranium isotope standard reference materials NIST, 350, NIST 930, of our isotopic laboratory standard CCLU 500 (20p.l, U concentration 200 ng 1) and of uranium with natural isotopic pattern were deposited on the leaf surface and analyzed by LA-ICP-MS at well defined laser crater diameters of 10, 15, 25 and 50 p.m. A precision for measurements of isotope ratios in the range of 2.1-1.0% for 235U/238U in selected isotope standards was observed whereby the precision and the accuracy of isotope ratios compared to the non-cooled laser ablation chamber was improved.125... 

---