Polyethylene butylene

Polyisobutylene 1.15 " Polyethylene butylene 7.7" Polyethylene 7.65 Polyethylene/propylene 7.35 Poly dimethyl siloxane... 

Like PU TPE, blends of thermoplastic polyurethanes and polyamide-12 (PA-12) have been studied by Polosmak and co-workers [61]. They have mixed two types of thermoplastic polyurethane (TPU) based on oligoether (polytetramethylene oxide, molecular weight, 1000) and oligoester (polyethylene butylene glycol adipate, molecular weight, 2000) and PA 12 were characterised by IR spectra and thermal analysis. IR spectra of TPU, PA-12 and their blends show that in amide one (Al) carbonyl absorbancy is seen to split [55] into two main bands with maxima at 1705 and 1730 cm 1. At 1730 cm 1,... 

Polyisobutylene 7.75 Polyethylene butylene 7.7 Polyethylene 7.65 Polyethylene/propylene... 

Engineering resins can be combined with either other engineering resins or commodity resins. Some commercially successhil blends of engineering resins with other engineering resins include poly(butylene terephthalate)—poly(ethylene terephthalate), polycarbonate—poly(butylene terephthalate), polycarbonate—poly(ethylene terephthalate), polysulfone—poly (ethylene terephthalate), and poly(phenylene oxide)—nylon. Commercial blends of engineering resins with other resins include modified poly(butylene terephthalate), polycarbonate—ABS, polycarbonate—styrene maleic anhydride, poly(phenylene oxide)—polystyrene, and nylon—polyethylene. 

Bi.4Bmv 1,4-Polybu ta diene (low vinyl) 1,2-Polybutadiene (medium vinyl) (30-60%) Polyethylene Poly(ethylene-co- butylene) Improved stress-strain properties... 

Polyethylene can be chlorinated in solution in carbon tetrachloride or in suspension in the piescnce ot a catalyst. Below 55-60% chlorine, it is more stable and more compatible with many polymers, especially polyvinyl chloride, to which it gives increased impact strength. The low pressure process copolymerizes polyethylene with propylene and butylene to increase its resistance to stress cracking. Copolymerization with vinyl acetate at high pressure increases flexibility, resistance to stress cracking, and seal ability of value to the food industry. 

PET = polyethylene terephlhalene SEES = styrene-ethylene butylene-styrene PSO = polysulfone. For other abbreviations see text. 

The most important olefins used for the production of petrochemicals are ethylene, propylene, the butylenes, and isoprene. These olefins are usually coproduced with ethylene by steam cracking ethane, LPG, liquid petroleum fractions, and residues. Olefins are characterized by their higher reactivities compared to paraffinic hydrocarbons. They can easily react with inexpensive reagents such as water, oxygen, hydrochloric acid, and chlorine to form valuable chemicals. Olefins can even add to themselves to produce important polymers such as polyethylene and polypropylene. Ethylene is the most important olefin for producing petrochemicals, and therefore, many sources have been sought for its production. The following discusses briefly, the properties of these olefmic intermediates. 

The three isomers constituting n-hutenes are 1-hutene, cis-2-hutene, and trans-2-hutene. This gas mixture is usually obtained from the olefinic C4 fraction of catalytic cracking and steam cracking processes after separation of isobutene (Chapter 2). The mixture of isomers may be used directly for reactions that are common for the three isomers and produce the same intermediates and hence the same products. Alternatively, the mixture may be separated into two streams, one constituted of 1-butene and the other of cis-and trans-2-butene mixture. Each stream produces specific chemicals. Approximately 70% of 1-butene is used as a comonomer with ethylene to produce linear low-density polyethylene (LLDPE). Another use of 1-butene is for the synthesis of butylene oxide. The rest is used with the 2-butenes to produce other chemicals. n-Butene could also be isomerized to isobutene. ... 

RAFT polymerization has been used to prepare poly(ethylene oxide)-/ /wA-PS from commercially available hydroxy end-functional polyethylene oxide).4 5 449 Other block copolymers that have been prepared using similar strategies include poly(ethylene-co-butylene)-6/oci-poly(S-eo-MAH), jl poly(ethylene oxide)-block-poly(MMA),440 polyethylene oxide)-Moe -poly(N-vinyl formamide),651 poly(ethylene oxide)-Wot A-poly(NlPAM),651 polyfethylene ox de)-b ock-polyfl,1,2,2-tetrahydroperfluorodecyl acrylate),653 poly(lactic acid)-block-poly(MMA)440 and poly( actic acid)-6focA-poly(NIPAM),4 8-<>54... 

TABLE 2.11 Typical Properties of Unfilled Polyethylene terephthalate) (PET), Poly(trimethylene terephthalate) (PTT), and Poly(butylene terephthalate (PBT) Solid-State Polyester Resins... 

The morphologies of various copolymers composed of polyethylene oxide), PEO, and poly (1,2-butylene oxide), PBut, were recently reviewed by Ryan et al. [61]. The corresponding phase diagrams of PEO-fr-PBut, PBut-fo-PEO-fo-PBut and PEO-fo-PBut-fo-PEO melts are depicted in Fig. 11. In all phase diagrams the semi-crystalline lamellar phase was not attained because of the copolymers low melting points. 

The influence of the ratio of hydroxylic/carboxylic end groups has been studied by several research groups. In the case of PET, this varies, based on the assumed mechanism over the range of 1.5-4.5 1. For poly(butylene terephthalate) (PBT) and polyethylene naphthalate) (PEN), the optimum is indicated at 2.0 1 [19, 20]. Any deviation from this ratio affects the reaction rate. 

The above-mentioned results of the SSP of PET can be generally applied to other semicrystalline polyesters, such as poly(butylene terephthalate) (PBT), poly(tri-methylene terephthalate) PTT), polyethylene naphthalate) (PEN) or any other kind of semicrystalline co-polyester, as a result of their similar reaction behaviors. Most of the studies have been focused on PET and PBT due to their industrial importance. Meanwhile, the popularity of PEN is growing on account of the outstanding properties of this particular polymer. 

Poly(trimethylene terephthalate) (PTT) is a newly commercialized aromatic polyester. Although available in commercial quantities only as recently as 1998 [1], it was one of the three high-melting-point aromatic polyesters first synthesized by Whinfield and Dickson [2] nearly 60 years ago. Two of these polyesters, polyethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT), have become well-established high-volume polymers. PTT has remained an obscure polymer until recent times because one of its monomers, 1,3-propanediol (PDO), was not readily available. PDO was sold as a small-volume fine chemical at more than 10/lb., and was therefore not suitable as a raw material for commercial polymers. 

It should be taken into account that all of the aspects described above are of a general nature and therefore more or less valid for any kind of industrially relevant polyester resin. Upon closer examination, the experiences gained with PET are particularly applicable to poly(butylene terephthalate) (PBT), poly(trimethylene terephthalate) (PTT) and polyethylene naphthalate) (PEN). These polymers have gained major industrial importance as a result of a number of different properties in comparison with PET. 

Butene-1, normal butylene with the double bond between the end and the second carbon, is used as a comonomer in making polyethylene. Poly-butylene and polyisobutylene are the polymers. Butadiene is used to make complex polymers, including synthetic rubbers. 

Mixed C4 olefins (primarily iC4) are isolated from a mixed C olefin and paraffin stream. Two different liquid adsorption high-purity C olefin processes exist the C4 Olex process for producing isobutylene (iCf ) and the Sorbutene process for producing butene-1. Isobutylene has been used in alcohol synthesis and the production of methyl tert-butyl ether (MTBE) and isooctane, both of which improve octane of gasoHne. Commercial 1-butene is used in the manufacture of both hnear low-density polyethylene (LLDPE) and high-density polyethylene (HDPE)., polypropylene, polybutene, butylene oxide and the C4 solvents secondary butyl alcohol (SBA) and methyl ethyl ketone (MEK). While the C4 Olex process has been commercially demonstrated, the Sorbutene process has only been demonstrated on a pilot scale. 

Butene is used as a comonomer to make polyethylene. About 65% is used for both LLDPE and HDPE (93 7). It is also used to make polybutene-1 (13%), valeraldehyde (pentanal) by the 0x0 process (12%), and butylene oxide (1%). 

---