Poly technology

Figure 4.12 Spherulites of poly( 1-propylene oxide) observed through crossed Polaroid filters by optical microscopy. See text for significance of Maltese cross and banding in these images. [From J. H. MaGill, Treatise on Materials Science and Technology, Vol. lOA, J. M. Schultz (Ed.), Academic, New York, 1977, with permission.]...

Another type of synthetic polymer-based chiral stationary phase is formed when chiral catalyst are used to initiate the polymerisation. In the case of poly(methyl methacrylate) polymers, introduced by Okamoto, the chiraUty of the polymer arises from the heUcity of the polymer and not from any inherent chirahty of the individual monomeric subunits (109). Columns of this type (eg, Chiralpak OT) are available from Chiral Technologies, Inc., or J. T. Baker Inc. 

Alternative technology for modifying a poly(aLkylene terephthalate) by incorporation of a phosphinate stmcture has been developed by Enichem. Phosphinate units of the stmcture —P(CgH5) (0)CH20— are introduced into a polyester such as PET or PBT by transesterification with an oligomer comprised of the aforementioned units (136). 

In 1954 the surface fluorination of polyethylene sheets by using a soHd CO2 cooled heat sink was patented (44). Later patents covered the fluorination of PVC (45) and polyethylene bottles (46). Studies of surface fluorination of polymer films have been reported (47). The fluorination of polyethylene powder was described (48) as a fiery intense reaction, which was finally controlled by dilution with an inert gas at reduced pressures. Direct fluorination of polymers was achieved in 1970 (8,49). More recently, surface fluorinations of poly(vinyl fluoride), polycarbonates, polystyrene, and poly(methyl methacrylate), and the surface fluorination of containers have been described (50,51). Partially fluorinated poly(ethylene terephthalate) and polyamides such as nylon have excellent soil release properties as well as high wettabiUty (52,53). The most advanced direct fluorination technology in the area of single-compound synthesis and synthesis of high performance fluids is currently practiced by 3M Co. of St. Paul, Minnesota, and by Exfluor Research Corp. of Austin, Texas. 

Poly(viaylidene fluoride) [24937-79-9] is the addition polymer of 1,1-difluoroethene [73-38-7], commonly known as vinylidene fluoride and abbreviated VDF or VF2. The formula of the repeat unit in the polymer is —CH2—CF2—. The preferred acronym for the polymer is PVDF, but the abbreviation PVF2 is also frequently used. The history and development of poly(vinyhdene fluoride) technology has been reviewed (1 3). 

Heat stabilizers protect polymers from the chemical degrading effects of heat or uv irradiation. These additives include a wide variety of chemical substances, ranging from purely organic chemicals to metallic soaps to complex organometaUic compounds. By far the most common polymer requiring the use of heat stabilizers is poly(vinyl chloride) (PVC). However, copolymers of PVC, chlorinated poly(vinyl chloride) (CPVC), poly(vinyhdene chloride) (PVDC), and chlorinated polyethylene (CPE), also benefit from this technology. Without the use of heat stabilizers, PVC could not be the widely used polymer that it is, with worldwide production of nearly 16 million metric tons in 1991 alone (see Vinyl polymers). 

Membrane Sep r tion. The separation of components ofhquid milk products can be accompHshed with semipermeable membranes by either ultrafiltration (qv) or hyperfiltration, also called reverse osmosis (qv) (30). With ultrafiltration (UF) the membrane selectively prevents the passage of large molecules such as protein. In reverse osmosis (RO) different small, low molecular weight molecules are separated. Both procedures require that pressure be maintained and that the energy needed is a cost item. The materials from which the membranes are made are similar for both processes and include cellulose acetate, poly(vinyl chloride), poly(vinyHdene diduoride), nylon, and polyamide (see AFembrane technology). Membranes are commonly used for the concentration of whey and milk for cheesemaking (31). For example, membranes with 100 and 200 p.m are used to obtain a 4 1 reduction of skimmed milk. 

Almost all synthetic binders are prepared by an emulsion polymerization process and are suppHed as latexes which consist of 48—52 wt % polymer dispersed in water (101). The largest-volume binder is styrene—butadiene copolymer [9003-55-8] (SBR) latex. Most SBRlatexes are carboxylated, ie, they contain copolymerized acidic monomers. Other latex binders are based on poly(vinyl acetate) [9003-20-7] and on polymers of acrylate esters. Poly(vinyl alcohol) is a water-soluble, synthetic biader which is prepared by the hydrolysis of poly(viayl acetate) (see Latex technology Vinyl polymers). 

The most innovative photohalogenation technology developed in the latter twentieth century is that for purposes of photochlorination of poly(vinyl chloride) (PVC). More highly chlorinated products of improved thermal stabiUty, fire resistance, and rigidity are obtained. In production, the stepwise chlorination may be effected in Hquid chlorine which serves both as solvent for the polymer and reagent (46). A soHd-state process has also been devised in which a bed of microparticulate PVC is fluidized with CI2 gas and simultaneously irradiated (47). In both cases the reaction proceeds, counterintuitively, to introduce Cl exclusively at unchlorinated carbon atoms on the polymer backbone. 

Lubricious Coatings for Biomaterials. Coatings of poly(ethylene oxide) when dry are tactile. If brought into contact with water, the poly(ethylene oxide) hydates rapidly and forms a lubricious coating. This type of technology is of great interest for biomedical devices introduced into the human body, such as catheters and endotracheal tubes, and for sutures (114—117). 

Emulsion Polymerization. Poly(vinyl acetate)-based emulsion polymers are produced by the polymerization of an emulsified monomer through free-radicals generated by an initiator system. Descriptions of the technology may be found in several references (35—39). 

Of interest is the manner in which cavities of the appropriate size are introduced into ion-selective membranes. These membranes typically consist of highly plasticized poly(vinyl chloride) (see Membrane technology). Plasticizers (qv) are organic solvents such as phthalates, sebacates, trimelLitates, and organic phosphates of various kinds, and cavities may simply be the excluded volumes maintained by these solvent molecules themselves. More often, however, neutral carrier molecules (20) are added to the membrane. These molecules are shaped like donuts and have holes that have the same sizes as the ions of interest, eg, valinomycin [2001-95-8] C H QN O g, and nonactin [6833-84-7] have wrap around stmctures like methyl monensin... 

The forecasts made in 1985 (77) of 8—8.5% worldwide aimual growth have not materialized. The 2 x lOg + /yr engineering plastic production reported for 1985—1986 has remained fairly constant. Whereas some resins such as PET, nylon-6, and nylon-6,6 have continued to experience growth, other resins such as poly(phenylene oxide) have experienced downturns. This is due to successhil inroads from traditional materials (wood, glass, ceramics, and metals) which are experiencing a rebound in appHcations driven by new technology and antiplastics environmental concerns. Also, recycling is likely to impact production of all plastics. 

Transesterification has a number of important commercial uses. Methyl esters of fatty acids are produced from fats and oils. Transesterification is also the basis of recycling technology to break up poly(ethylene terephthalate) [25038-59-9] to monomer for reuse (29) (see Recycling, plastics). Because vinyl alcohol does not exist, poly(vinyl alcohol) [9002-89-5] is produced commercially by base-cataly2ed alcoholysis of poly(vinyl acetate) [9003-20-7] (see Vinyl polymers). An industrial example of acidolysis is the reaction of poly(vinyl acetate) with butyric acid to form poly(vinyl butyrate) [24991-31-9]. 

---