Physical properties particles

This method is commonly nsed on spectral data to correct for multiplicative variations between spectra. In spectroscopy, snch variations often originate from nnintended or uncontrolled differences in sample path length (or effective path length, in the case of reflectance spectroscopy), caused by variations in sample physical properties (particle size, thickness), sample preparation, sample presentation, and perhaps even variations in spectrometer optics. Snch variations can be particularly problematic because they are confounded with mnltiplicative effects from changes in component concentrations, which often constitute the signal in qnantitative applications. It is important to note that multiplicative variations cannot be removed by derivatives, mean-centering or variable-wise scaling. 

The critical unit operations that should be monitored and/or optimized are the reaction and fermentation steps for the purpose of increasing API yield and reducing the residual impurity profile. Other critical unit operations that are especially important to the end user (pharmaceutical dosage form operations) include precipitation or crystallization, milling, sizing, and purification operations, which may affect the physical properties (particle size and shape, bulk powder flow, blend uniformity, and compressibility) of the API. 

Physical Properties Particle Size Distribution Defiocculation Working Moisture Content Firing Shrinkage Fired Colour Vitrification. . 

In addition to thermodynamic considerations of miscibility and equilibrium solubility, the physical properties (particle size and shape) of the powder or granular HME polymers, the molecular weight and crystallinity, as well as the chemical nature of the monomers of the backbone and side branches, are expected to affect the extrusion performance of the polymers and the occurrence of possible interactions with the drug and plasticizer. 

Clusters are intennediates bridging the properties of the atoms and the bulk. They can be viewed as novel molecules, but different from ordinary molecules, in that they can have various compositions and multiple shapes. Bare clusters are usually quite reactive and unstable against aggregation and have to be studied in vacuum or inert matrices. Interest in clusters comes from a wide range of fields. Clusters are used as models to investigate surface and bulk properties [2]. Since most catalysts are dispersed metal particles [3], isolated clusters provide ideal systems to understand catalytic mechanisms. The versatility of their shapes and compositions make clusters novel molecular systems to extend our concept of chemical bonding, stmcture and dynamics. Stable clusters or passivated clusters can be used as building blocks for new materials or new electronic devices [4] and this aspect has now led to a whole new direction of research into nanoparticles and quantum dots (see chapter C2.17). As the size of electronic devices approaches ever smaller dimensions [5], the new chemical and physical properties of clusters will be relevant to the future of the electronics industry. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Physical Properties. Physical properties of importance include particle size, density, volume fraction of intraparticle and extraparticle voids when packed into adsorbent beds, strength, attrition resistance, and dustiness. These properties can be varied intentionally to tailor adsorbents to specific apphcations (See Adsorption liquid separation Aluminum compounds, aluminum oxide (alumna) Carbon, activated carbon Ion exchange Molecular sieves and Silicon compounds, synthetic inorganic silicates). 

Aluminum hydroxide gel may be prepared by a number of methods. The products vary widely in viscosity, particle size, and rate of solution. Such factors as degree of supersaturation, pH during precipitation, temperature, and nature and concentration of by-products present affect the physical properties of the gel. 

Black Pigments. The only black pigment used to an appreciable extent in inks is carbon black It is used in newsprinting, pubHcation, commercial and packaging printing therefore, in large quantities. Black pigments ate offered in fluffy or beaded forms and in a variety of particle sizes and physical properties. 

The carbon black in semiconductive shields is composed of complex aggregates (clusters) that are grape-like stmctures of very small primary particles in the 10 to 70 nanometer size range (see Carbon, carbon black). The optimum concentration of carbon black is a compromise between conductivity and processibiUty and can vary from about 30 to 60 parts per hundred of polymer (phr) depending on the black. If the black concentration is higher than 60 phr for most blacks, the compound is no longer easily extmded into a thin continuous layer on the cable and its physical properties are sacrificed. Ionic contaminants in carbon black may produce tree channels in the insulation close to the conductor shield. 

Although the size separation/classification methods are adequate in some cases to produce a final saleable mineral product, in a vast majority of cases these produce Httle separation of valuable minerals from gangue. Minerals can be separated from one another based on both physical and chemical properties (Fig. 8). Physical properties utilized in concentration include specific gravity, magnetic susceptibility, electrical conductivity, color, surface reflectance, and radioactivity level. Among the chemical properties, those of particle surfaces have been exploited in physico-chemical concentration methods such as flotation and flocculation. The main objective of concentration is to separate the valuable minerals into a small, concentrated mass which can be treated further to produce final mineral products. In some cases, these methods also produce a saleable product, especially in the case of industrial minerals. 

Some studies (6) have been carried out to measure distribution of soHds in mixing tanks. Local soHds concentrations at various heights are measured at different impeller speeds. Typical data (Fig. 16) demonstrate that very high mixer speeds are needed to raise the soHds to high levels. At low levels, soHds concentration can exceed the average concentration at low mixer speeds. These soHds distributions depend on the impeller diameter, particle size, and physical properties. 

Other. A large variety of additives are used in paper-coatiag colors primarily to modify the physical properties of the colors (102). At high soHds concentrations in water, mineral pigment particles tend to associate and form viscous pastes. Dispersants (qv) are used to prevent this and to provide low viscosity slurries. Common dispersants include polyphosphates and sodium polyacrylate [9003-04-7]. Various water-soluble polymers are added to coatiag colors and act as water-retention agents and as rheology modifiers. 

During the preformulation stage, the chemical and physical properties of the dmg moiety are studied exhaustively to ensure stabdity, safety, bioavadabdity, and therapeutic efficacy. Tablets are produced directly by compression of powder blends or granulations, which include a small percentage of fine, particle-sized powders. 

Waferboard, a more recent wood constmction product, competes more with plywood than particle board. Waferboard and strand board are bonded with soHd, rather than Hquid, phenoHc resins. Both pulverized and spray-dried, rapid-curing resins have been successfully appHed. Wafers are dried, dusted with powdered resin and wax, and formed on a caul plate. A top caul plate is added and the wafers are bonded in a press at ca 180°C for 5—10 min. Physical properties such as flexural strength, modulus, and internal bond are similar to those of a plywood of equivalent thickness. 

Steps 1 and 2 can be described as physical plasticization, and the precise details of how this is carried out depends on the appHcations technology involved, ie, suspension or paste PVC. The rate at which step 2 occurs depends on the physical properties of plasticizer visocity, resin porosity, and particle size. 

---