Physical properties compound class

Location of the compound within a class (or homologous series) of compounds. Reference to the literature or to tables of the physical properties of the class (or classes) of organic compounds to which the substance has been assigned, will generally locate a number of compounds which boil or melt within 6° of the value observed for the unknown. If other physical properties e.g., refractive index and density for a hquid) are available, these will assist in deciding whether the unknown is identical with one of the known compounds. In general, however, it is more convenient in practice to prepare one, but preferably two, crystalhne derivatives of the substance. 

The production of both an alcohol and the sodium salt of an acid might easily be confused with the hydrolysis products of an ester (in the above instance benzyl benzoate). Such an error would soon be discovered (e.g., by reference to the b.p. and other physical properties), but it would lead to an unnecessary expenditure of time and energy. The above example, however, emphasises the importance of conducting the class reactions of neutral oxygen-containing compounds in the proper order, viz., (1) aldehydes and ketones, (2) esters and anhydrides, (3) alcohols, and (4) ethers. 

Physical Properties Electrical. Electrical properties have been the main focus of study of organic semiconductors, and conductivity studies on organic materials have led to the development of materials with extremely low resistivities and large anisotropies. A discussion of conductivity behaviors for various classes of compounds follows. 

Additional discussions are available in the General References concerning the properties of several nitrofiirans. This includes further coverage of the chemotherapeutic and physical properties antimicrobial activity bacterial resistance absorption, distribution, and excretion clinical use and safety studies, of this interesting class of antiinfective compounds. 

Higher order aUphatic quaternary compounds, where one of the alkyl groups contains - 10 carbon atoms, exhibit surface-active properties (167). These compounds compose a subclass of a more general class of compounds known as cationic surfactants (qv). These have physical properties such as substantivity and aggregation ia polar media (168) that give rise to many practical appHcations. In some cases the ammonium compounds are referred to as iaverse soaps because the charge on the organic portion of the molecule is cationic rather than anionic. 

The physical properties of commercial alkoxysilanes are provided in Table 1. Two classes of silane esters have very distinct properties and are generally considered apart from alkoxysilanes. Sdatranes are compounds derived from trialkanolamines and have siHcon—nitrogen coordination. These are generally hydrolytically stable and have unique physiological properties (3). A second special class of monomeric esters are cycHc diesters of polyethyleneoxide glycols designated sila-crowns, which have appHcation as catalysts (4). Neither silatranes nor sila-crowns are considered herein. 

Accelerators are chemical compounds that iacrease the rate of cure and improve the physical properties of the compound. As a class, they are as important as the vulcanising agent itself. Without the accelerator, curing requires hours or even days to achieve acceptable levels. Aldehyde amines, thiocarbamates, thiuram sulfides, guanidines, and thiasoles are aU. classified as accelerators. By far, the most widely used are the thiasoles, represented by mercaptobensothiasole (MBT) and bensothiasyl disulfide (MBTS). 

Use of such a data system is easy, provided that the permanent system data bank has entries for the components of interest. Thus it is often important to the user that the data bank is extensive and not restricted to a small class of compounds. However, the number of chemical species is enormous and expanding at a rapid rate. Accordingly, for wide appHcation it is necessary that the physical property system embodies faciUties for the use of user-supphed data. 

Most compounds in which carbon is the key element are classified as organic. Common examples of organic compounds include degreasing solvents, lubricants, and heating and motor fuels. This subsection highlights some of the more common characteristics of organics as they relate to hazards. Various relevant classes of organics are presented in terms of chemical behavior and physical properties. In order to facilitate the discussion to follow, a few basic definitions will be presented first. 

In previous chapters we have discussed the chemical and physical properties of many kinds of substances. For the most part, these materials were made up of either small molecules or simple ions. In this chapter, we will be concerned with an important class of compounds containing large molecules. We call these compounds polymers. 

This chapter summarizes the synthesis, physical properties and reactions of N-nitroso compounds [26]. They may be subdivided into four classes ... 

A vast number of polymer compounds are available commercially. Generally they are known by their polymer type in full or abbreviated (e.g., acrylic, polyvinyl chloride or PVC, high density polyethylene or HDPE), and frequently by a manufacturer s trade name. There is little standardisation into classes based on chemical composition or physical performance, as there is for metals. In reality, a particular chemical composition does not fully define the physical properties, while each class of performance properties can be met by a range of competing polymer types. The current trend is towards further diversification polymer compounds are increasingly being tailored to a particular application. Only in industries where recycling is an issue is there pressure for a more limited number of polymers, which can be identified and separated at the end of product life. 

Detailed analysis of residual products, such as residual fuel oil, is more complex than the analysis of lower-molecular-weight liquid products. As with other products, there are a variety of physical property measurements that are required to determine that residnal fnel oil meets specifications. But the range of molecular types present in petrolenm prodncts increases significantly with an increase in the molecular weight (i.e., an increase in the number of carbon atoms per molecule). Therefore, characterization measurements or studies cannot, and do not, focus on the identification of specific molecular structures. The focus tends to be on molecular classes (paraffins, naphthenes, aromatics, polycyclic compounds, and polar compounds). 

Use reference books and the Internet to discover any useful applications of the compounds you made. Prepare a short report for your class, explaining how you think each compound s physical properties may affect its usefulness in real life. 

---