Phenols dissolving metals

Bromine is used as an analytical reagent to determine the amount of unsaturation in organic compounds because carbon—carbon double bonds add bromine quantitatively, and for phenols which add bromine in the ortho and para positions. Standard bromine is added in excess and the amount unreacted is deterrnined by an indirect iodine titration. Bromine is also used to oxidize several elements, such as T1(I) to T1(III). Excess bromine is removed by adding phenol. Bromine plus an acid, such as nitric and/or hydrochloric, provides an oxidizing acid mixture usefiil in dissolving metal or mineral samples prior to analysis for sulfur. 

Ion exchange, in which cation and/or anion resins are used to replace undesirable anionic species in liquid solutions with nonhazardous ions. For example, cation-exchange resins may contain nonhazardous, mobile, positive ions (e g., sodium, hydrogen) which are attached to immobile acid groups (e.g., sulfonic or carboxylic). Similarly, anion-exchange resins may include nonhazardous, mobile, negative ions (e.g., hydroxyl or chloride) attached to immobile basic ions (e.g., amine). These resins can be used to eliminate various species from wastewater, such as dissolved metals, sulfides, cyanides, amines, phenols, and halides. 

Dissolving metal reductions of the benzene rings are especially important with functional derivatives of benzene such as phenols, phenol ethers and carboxylic acids (pp. 80, 82,93 and 140). 

Catalytic oxidation is the most important technology for the conversion of hydrocarbon feedstocks (olefins, aromatics and alkanes) to a variety of bulk industrial chemicals.1 In general, two types of processes are used heterogeneous, gas phase oxidation and homogeneous liquid phase oxidation. The former tend to involve supported metal or metal oxide catalysts e.g. in tne manufacture of ethylene oxide, acrylonitrile and maleic anhydride whilst the latter generally employ dissolved metal salts, e.g. in the production of terephthalic acid, benzoic acid, acetic acid, phenol and propylene oxide. 

Irritant dermatitis does not involve an immune response and is typically caused by contact with corrosive substances that exhibit extremes of pH, oxidizing capability, dehydrating action, or tendency to dissolve skin lipids. In extreme cases of exposure, skin cells are destroyed and a permanent scar results. This condition is known as a chemical burn. Exposure to concentrated sulfuric acid, which exhibits extreme acidity, or to concentrated nitric acid, which denatures skin protein, can cause bad chemical bums. The strong oxidant action of 30% hydrogen peroxide likewise causes a chemical bum. Other chemicals causing chemical bums include ammonia, quicklime (CaO), chlorine, ethylene oxide, hydrogen halides, methyl bromide, nitrogen oxides, elemental white phosporous, phenol, alkali metal hydroxides (NaOH, KOH), and toluene diisocyanate. 

Brezova, V., Blazkova, A., Borosova, E., Ceppan, M. and Fiala, R. (1995) The influence of dissolved metal ions on the photocatalytic degradation of phenol in aqueous Ti02 suspensions. J. Mol. Catal. A Chem. 98, 109-116. 

The acid-base properties of DOM are of intrinsic interest because acidic functional groups contribute to the acid-base balance of natural waters, affect complexation and transport of dissolved metals, and interact with mineral surfaces. The concentrations of carboxyl and phenolic functional groups are among the most widely measured and reported properties of DOM. Methodologically, there are two basic approaches for measuring acidic group content—indirect titrations and direct titrations (Perdue et al., 1980 Perdue, 1985 Ritchie and Perdue, 2003). 

When phenol is treated with Na/NHg/EtOH and then hydrolyzed with 2N HCl, the product is cyclohex-2-en-l-one. Draw this product and also the one formed from the dissolving metal reduction. Provide a mechanism that converts the dissolving metal product to the final product in aqueous acid. 

In addition to analyses for CAA, other analyses that require different preservation steps may be desired. Listed below are the most common analyses and the preservation steps that they require also, see lists in Lico et al. (1982). Samples for chemical oxygen demand and total organic carbon should be treated with 2 ml of concentrated H2SO4 per liter of sample. Samples for phenols should have Ig of copper sulfate added per liter of sample, and then should be acidified to pH 4 with phosphoric acid. Samples for dissolved metals should have 3 ml of 1 1 nitric acid added per liter of sample. Samples for sulfide analysis should have 2ml of zinc acetate added per liter of sample. Samples for nonmetal anions and sulfate analysis need no treatment. 

The most important appHcation of metal alkoxides in reactions of the Friedel-Crafts type is that of aluminum phenoxide as a catalyst in phenol alkylation (205). Phenol is sufficientiy acidic to react with aluminum with the formation of (CgH O)2Al. Aluminum phenoxide, when dissolved in phenol, greatiy increases the acidic strength. It is beheved that, similar to alkoxoacids (206) an aluminum phenoxoacid is formed, which is a strong conjugate acid of the type HAl(OCgH )4. This acid is then the catalyticaHy active species (see Alkoxides, metal). 

Arid .—Make a solution (if not already dissolved) and test with litmus. If the liquid is acid, a fiee (UvVf is probably present. If the liquid is neutral and a metal has been found, a metallic salt is probably present. If the liquid is alkaline, it may be the alkaline salt of a phenol or an alkaline cyanide, both of which are hydiolysed in solution. The separation and identification ot the acid is not a eiy simple niattei. If the acid is an aromatK ... 

Paints used for protecting the bottoms of ships encounter conditions not met by structural steelwork. The corrosion of steel immersed in sea-water with an ample supply of dissolved oxygen proceeds by an electrochemical mechanism whereby excess hydroxyl ions are formed at the cathodic areas. Consequently, paints for use on steel immersed in sea-water (pH 8-0-8-2) must resist alkaline conditions, i.e. media such as linseed oil which are readily saponified must not be used. In addition, the paint films should have a high electrical resistance to impede the flow of corrosion currents between the metal and the water. Paints used on structural steelwork ashore do not meet these requirements. It should be particularly noted that the well-known structural steel priming paint, i.e. red lead in linseed oil, is not suitable for use on ships bottoms. Conventional protective paints are based on phenolic media, pitches and bitumens, but in recent years high performance paints based on the newer types of non-saponifiable resins such as epoxies. 

---