Oxygenated products

Fig. 5. Chemistry of cyclized mbbei—bis-a2ide negative acting resist, (a) Preparation of cyclized mbber resin from polyisoprene (b) photochemistry of aromatic bis-a2ide sensiti2ers. The primary photoproduct is a highly reactive nitrene which may combine with molecular oxygen to form oxygenated products, or may react with the resin matrix by addition or insertion to form polymer—polymer linkages.

Another group of compounds called oxygen scavengers retard oxidation by reducing the available molecular oxygen. Products in this group are water soluble and include erythorbic acid [89-65-6] C HgO, and its salt sodium erythorbate [6381-77-7] C HgO Na, ascorbyl pahnitate [137-66-6] 22 38 7 ascorbic acid [50-81-7] C HgO, glucose oxidase [9001-37-0] and sulfites (23). 

Propane. The VPO of propane [74-98-6] is the classic case (66,89,131—137). The low temperature oxidation (beginning at ca 300°C) readily produces oxygenated products. A prominent NTC region is encountered on raising the temperature (see Fig. 4) and cool flames and oscillations are extensively reported as compHcated functions of composition, pressure, and temperature (see Fig. 6) (96,128,138—140). There can be a marked induction period. Product distributions for propane oxidation are given in Table 1. 

Isobutane shows the usual NTC and cool flame phenomena (78,154,157,158). As the pressure is iacreased, the expected iacrease ia oxygenated products retaining the parent carbon skeleton is observed (96). Under similar conditions, isobutane oxidizes more slowly than / -butane (159). There are stUl important unresolved questions concerning isobutane VPO (160). 

An important side reaction in all free-radical nitrations is reaction 10, in which unstable alkyl nitrites are formed (eq. 10). They decompose to form nitric oxide and alkoxy radicals (eq. 11) which form oxygenated compounds and low molecular weight alkyl radicals which can form low molecular weight nitroparaffins by reactions 7 or 9. The oxygenated hydrocarbons often react further to produce even lighter oxygenated products, carbon oxides, and water. 

Eor vapor-phase processes, the product stream from the nitrator must be separated. The nitroparaffins, excess propane, and NO plus NO2 (which are converted back to HNO ), are recovered. The oxygenated products are removed, but there are generally insufficient amounts for economic recovery. 

The standard potential for the anodic reaction is 1.19 V, close to that of 1.228 V for water oxidation. In order to minimize the oxygen production from water oxidation, the cell is operated at a high potential that requires either platinum-coated or lead dioxide anodes. Various mechanisms have been proposed for the formation of perchlorates at the anode, including the discharge of chlorate ion to chlorate radical (87—89), the formation of active oxygen and subsequent formation of perchlorate (90), and the mass-transfer-controUed reaction of chlorate with adsorbed oxygen at the anode (91—93). Sodium dichromate is added to the electrolyte ia platinum anode cells to inhibit the reduction of perchlorates at the cathode. Sodium fluoride is used in the lead dioxide anode cells to improve current efficiency. 

The formation of heterocycles derived from quinones is an important synthetic technique. The reaction may be intramolecular, eg, the reaction of (92). Either nitrogen products, eg (93) (yields of 85—91% for R = H, CH, and C H ) or oxygen products (94) are obtained (92,93). Reactions with enamines have been especially important. 

However, the same oxygen also oxidizes ethane and ethylene to CO2 and other oxygenated products. Therefore, selectivity to olefins is a serious consideration. Literature citations (93,94) claim development of low temperature, highly selective oxydehydrogenation catalysts. Although this process has not yet been commercialized, it seems promising. 

Oxygenates and Chemicals A whole host of oxygenated products, i.e., fuels, fuel additives, and chemicals, can be produced from synthesis gas. These include such produc ts as methanol, ethylene, isobutanol, dimethyl ether, dimethyl carbonate, and many other hydrocarbons and oxyhydrocarbons. Typical oxygenate-producing reactions are ... 

The nitrogen is obtained as a byproduct of an oxygen production process (1,200 tpd of oxygen) in a dedicated oxygen plant. In diis plant, parallel expansion turbines are used dial were designed especially for die process. The first expansion turbine train (two... 

The noncatalytic oxidation of propane in the vapor phase is nonselec-tive and produces a mixture of oxygenated products. Oxidation at temperatures below 400°C produces a mixture of aldehydes (acetaldehyde and formaldehyde) and alcohols (methyl and ethyl alcohols). At higher temperatures, propylene and ethylene are obtained in addition to hydrogen peroxide. Due to the nonselectivity of this reaction, separation of the products is complex, and the process is not industrially attractive. 

The principal organic reaction of ozone is its addition to the carbon-carbon double bond of an ethylenic compd. The resulting ozone-olefin addition compd is known as an ozonide. Decompn of the ozonide gives a mixt of oxygenated products containing carbonyl compds and acids. 

---